AutoCAD Inventor :: Way To Pull Constraint Into Main Edit Window For Direct Editing?
Sep 24, 2011
I am playing with a design in simulation where the balance is effected by gravity. I have a part at a set angle to start off so a constraint is place and set to this angle,then in simulation I suppress the angle prior to starting the simulation to see what happens. Then I unsuppress the angle then edit it to adjust the simulation to a new angle I then resupress the angle to free it up and run the simulation again.
This can go on a few times until the angle is found in the simulation.The problem I have is it takes ages to do this. Basically it seems in simulation the tree is always collapsed and I want it expanded, how ever after each change the tree collapses?
Is there a way to have the tree always expanded so I can quickly find and adjust my constraint? Or even better is there a way to pull the constraint into the main edit window for direct editing?
It would be good if a small bow / window could be opened with the ability to add a setting/constraignt that needs constant updating.
View 2 Replies
ADVERTISEMENT
Jul 22, 2013
I have 4 different sub assemblies , each with a common part , I need to line up all these common parts in my main assembly.
View 5 Replies
View Related
Dec 19, 2012
Is there any way to open a new window of your model that is not inside the main window of inventor?
I have two monitors and would like to be able to have another window / view open on the other monitor.
View 1 Replies
View Related
Dec 18, 2012
Is there a way to expand the constraint window so that I can see my entire parameter formula? In the image below, my equation is cut off in the "offset" window. Or am I supposed to be inputting the parameters in some other manner?
View 9 Replies
View Related
Mar 11, 2013
As a new user I really prefer the single window mode but have a real problem in that every time I open a filter the window/box that open opens up underneath the single window and I cant see it without minimising the main gimp window. I've played with the preferences windows management options and seem to have all the file options curves etc on top now (these were opening under the single window at one point) but nothing I do seems to want to make the filter boxes open where I can see them - It's making GIMP quite unpleasant to use.
View 2 Replies
View Related
Jul 30, 2012
I am designing a vertical axis wind turbine just for some practice (just started using Inventor) and everything was going smoothly until I tried to "animate" it spinning. First, I set up a work plane that goes through the center of the structure, and then I clicked angle constraint "explicit reference vector." After watching several youtube videos, I figured that I should click on the work plane, click on another reference point, and then click another point that would be orthogonal to those two (right?). Well after I choose the first point, Inventor will only allow me to choose the center axis as the second option (which I think should be the third option).
View 6 Replies
View Related
Apr 17, 2012
All of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?
View 3 Replies
View Related
Dec 18, 2013
Info:
OS: Windows 7 Pro
CPU: AMD FX-8350 @4.2ghz
GPU: Nvidia Quadro K4000
Monitors: Dual Asus 24" 1920x1080
Memory: 16gb
GPU Control Panel: Nvidia Version 331.65 for Quadro K4000
Autodesk Platform: Product Design Suite 2014
When I section a view and edit the hatches, the 'Edit Hatch Pattern' window always opens off-screen. I have changed the settings in the GPU control panel to have everything open on the last window, but this window will not abide. I move the window to the Inventor window (monitor 2), but it will re-open back to monitor 1 in the exact same position every time.
The 'Edit Hatch Pattern' window seems to be the only window that does this in Inventor. Attached is a screen cap of the issue. The window opens in the same place each time.
OS: Windows 7 Pro
CPU: AMD FX-8350 @4.2ghz
GPU: Nvidia Quadro K4000
Monitors: Dual Asus 24" 1920x1080
Memory: 16gb
GPU Control Panel: Nvidia Version 331.65 for Quadro K4000
Autodesk Platform: Product Design Suite 2014
View 1 Replies
View Related
Dec 7, 2013
How to switch focus to AutoCAD document window from my form of C# .NET plug-in.
After user pressed the button, I invite him to input a point, but my form still on top.
And it is nessesary to press minimize button, next to set a Focus on Autocad window, then to pick a point.
It is not handy enough.
I did not find a property to set a focus in class of Application.MainWindow.
View 6 Replies
View Related
May 25, 2012
Is there any way to set that 'edit dimension' window/box in the sketch environment so that it opens to the length of the parameter being used? All my models for our library items are entirely controlled by Excel sheets and the names of the parameters are often quite lengthy. It's very annoying to have to drag the edit dimension box wider each time and push home or end to see everything.
View 4 Replies
View Related
Mar 21, 2012
Is it possible to directly edit the alpha channel? I need to edit it for a 3D model I've made, and its showing up as too shiney (The engine is looking at the alpha for reflectivity).
However, I have yet to see a way to edit the alpha channel directly.
View 1 Replies
View Related
Aug 13, 2012
if it is possible to take a camera raw file from lightroom and open it directly in Camera Raw for editing rather than use the editing in LR itself. I thought I read somewhere that it is possible to do this as an automatic setting - when choosing the "edit in Photoshop" menu option a raw file will be opened in Camera Raw and the changes tracked in LR. I prefer the Camera Raw interface in Ps so am hoping I can do this and then proceed on to Ps if I need to do further processing. I am using LR4 and Ps6 on a Mac with the latest updates. I am a recent convert to LR/Ps from Aperture so am still learning.
View 4 Replies
View Related
Nov 12, 2013
I am having a serious problem with gimp on my mackbook pro, running os x mavericks, but the problem also existed in mountain lion.
When any dialog box appears where there is a text box for keyboard input, the keystrokes go to the background gimp main window instead of the foreground dialog box. So it's impossible, for example, to type in a new file name on a save as dialog box. Another example is it's impossible to type in an image width in the scale image dialog box. This is true of all the dialog boxes I've checked.
This makes gimp practically unusable on a mac, and is therefore a serious problem. I know of a workaround that involves typing in data into the mac text editor and pasting it into gimp dialog boxes, but that's ugly and unacceptable.
View 7 Replies
View Related
Apr 24, 2013
Shortly around the time I signed in to Autodesk 360 I began to have problems with how I interface with the program. I have AutoCAD LT 2013 and, having used the programs for 20 years, I use the AutoCAD LT Classic format for tools and menus. Also due to how I learned CAD in the early 90s and with many abbreviated commands, I use the keyboard extensively.
1. Certain actions using my mouse have stopped working (i.e. Right-click to edit hatch or blocks). Basically a "recent input" menu comes up each time, showing a short history of my commands.
2. When I click on an object, from the top bar I can no longer edit using the pull downs for Layer, Color, Line Type, etc.
3. I can only edit via the Properties menu or through typing in commands. However when I go to change a setting in the Property menu, the boxes with an ellipsis do not respond at all.
View 3 Replies
View Related
Dec 29, 2011
Recently upgraded to Windows 7 from XP and changed from a laptop to a desktop. With the laptop I used dual monitors; to date I haven't secured a second monitor from IT for true dual monitors.
Well I have some iParts that I've edited using excel and they have formulas that I can't edit using the standard iPart dialog, but when I click "Edit via Spreadsheet" the window opens off screen. The alt+Spacebar method doesn't work in Windows 7 and the Windows 7 method of shift+right-click isn't an option because Excel doesn't appear on the taskbar and selcting Inventor moves the Inventor window, not the instance of excel inside of inventor.
2013 Product Design Suite Ultimate
Windows 7 Sp1
Intel(R) Core (TM) i5-2400 @ 2.00GHz
6.00 GB of RAM
AMD Radeon HD 6570
View 3 Replies
View Related
Nov 16, 2008
I am using Photoshop CS4 on a 32bit vista Q6600. When I installed CS4, I had a graphics card based on a 8600GS. Photoshop run fine, even in openGL.
Not I upgraded the graphics card to a 9600GT for better performance. CS4 still starts, but when a photo is loaded, the photo appears correctly in the navigator, but the main window where the photo usually appeared remains grey, as the background. When moving around this window, the photo appear, but as soon as I release the mouse button, the window turn grey again...
When I deactivate openGL in CS4, everything seems to work.
I am having the latest NVidia drivers installed 178.24 (with both graphics cards).
I tried to reinstall the driver, no change.
I tried to reinstall CS4, no change.
getting CS4 work in openGL with this 9600GT?
View 4 Replies
View Related
Sep 9, 2012
I can open Photoshop just fine, all the buttons work. I can see everything that I'm doing in the layer preview thumbnail, but all I see on the main design screen is the 'transparent' background. The cursor shows up and looks the part of whatever brush I'm using, but nothing happens on the main screen. I haven't even got a chance to use this version
View 11 Replies
View Related
Jul 8, 2011
I'm not sure if Gimp developers are able to assist, but running Gimp inUnity seems to be a bit problematic at times. Because of the global menu,focus on the correct toolbox / area is needed. Furthermore, Unity / Gimpseems to apply the focusing a bit unintelligently. For example, if I moveto another workspace and return to the Gimp workspace, the focus is nolonger on the main window, but rather on the toolbox.
View 6 Replies
View Related
Mar 29, 2013
After installing Gimp 2.8.4 when i launch program all i get is the Layer-Brushes toolbox. I can't find the main window?
View 1 Replies
View Related
Nov 18, 2013
In X4 I could set the pallettes I wanted (layers and History) to a docked position on the RHS. With X6 the pallettes cover the RH part of the window and the image, with the opened image centred on the whole screen so that the RH part is cut off. It can't be centred within the area visible when the pallettes are open. This gives a smaller visible image if the whole image is in view. This is a serious issue, which X4 handled ok ! I've tried all the options but cannot get X6 to behave like x4
View 3 Replies
View Related
Jan 30, 2013
I recently started using Maya on Mac OSX, after having always used it on Linux, and I'm really baffled by the child windows behavior (think Hypershade, Graph Editor, Script Editor, etc...)
The shortcut Cmd+~ does switch focus between the windows, but the child windows always stay on top of the main one. That means that if I open one of these, but need to work in the main maya window, I need to click on the minimize button or double-click the title bar (because Cmd+M doesn't work on these!!!), then need to click in the dock to recall them...
Surely I must have missed something, didn't I? Is there a way to ensure the child windows are hidden by the main window when I switch focus using Cmd+~? On Linux I remember we had a way to set the environment variable MAYA_SET_PARENT_HINT to change this. For sure it's possible under OSX, since that's how firefox / safari and other applications work (switching focus between the different child windows correctly manage which one are in the foreground / background)
View 2 Replies
View Related
Dec 6, 2013
I have just installed Elements 12. I went to open some jpeg images. They appear in the Photo Bin but can't be made to appear in the main window. The Layer Panel shows the background copy of the images.
View 3 Replies
View Related
Oct 18, 2007
photoshop CS2 stoped displaying the red channel correctly on all images. The red channel displays very muted color.
After deleting all preferences of CS2, cleaning out the Windows registry, and upgrading to CS3 the problem still remains.
In CS3 however, the color shift goes away if I drag the image outside of Photoshop's main window.
I have a screenshot of this, http://www.miats.com/tmp/PhotoshopIssue.jpg
Photoshop states that both of the large images are solid R:255 G:0 B:0. However, after print screening the images and pasting them back into Photoshop, it shows that the one on the left is actually R:201 G:88 B:34.
The same thing happens for green and blue as well, though the difference is much less dramatic.
I don't remember changing any settings and my laptop (Win XP, CS2) does not have this problem when loading the same images.
My computer is running VISTA 32bit with 3GB of ram. The graphics card is a NVIDIA 6800.
View 1 Replies
View Related
Jul 27, 2013
I just now installed LR5, converting my LR3 catalog to LR5 catalog. Everything seemed to go fine. I picked one photo and converted to the 2012 process. The new sliders appeared.
The problem: Any changes I make are seen only in the Navigator window, not the main window. I figured there had to be a simple fix, but I've scoured the web and can find no one having similar problems.
View 3 Replies
View Related
Jul 23, 2013
I'm trying to edit multiple camera videos on main and overlay tracks switching between them. I cannot seem to be able to leave a gap on the main video track at all whether ripple is on or off. What do I do to leave a gap in the main video track (with the video at that point in the overlay)?
Also I noticed the Track Manager has a greyed drop down to add video tracks. Is there a higher priced version to have more video tracks as opposed to overlay tracks?
View 8 Replies
View Related
Feb 21, 2013
Using Inventor LT - path does not pull in the file from database when using Inventor LT. Inventor LT does launch but file does not open.
View 3 Replies
View Related
Nov 26, 2013
I want to create an iproperty that has a pull down menu where I can make a selection. Can this be done? Can I import this data from a txt, csv, xml file?
View 3 Replies
View Related
Mar 1, 2013
Something I'd like to see fixed (or find out how) is when using the start New File icon, if you select the icon itself, you are directed to the templates folder of the active project, but if you select the "Pull Down" arror next to the icon, you are taken to the Inventor Standard default templates which are typically not used.
I see numerous users unknowingly selecting those default templates and not noticing until they've started entering dims, etc. They get very upset at having to make sure they select the icon and question as to why it would be different.
Same deal if one is to select the Inventor Icon in the far left upper corner (this is more common than the users selecting the pull down) and then select "New", again, they are shuttled to the default templates and not the associated project file templates...why?
[URL]
View 8 Replies
View Related
Sep 12, 2013
I want to add the menu in the main menubar where the File Edit etc. are there.
how to do this using .NET ?
View 1 Replies
View Related
Nov 1, 2012
With iLogic, define some pre notes and when the user choose one option some notes are chosen too.The idea now is: Create a text direct inside on Sketched Symbol OR edit some textfields inside the Symbol.
The symbol could be one existent, so its not necessary to create it.
I got a code to create the text, and that works perfectly! Just what im trying now is create this text into the Symbol... I've tried many ways with reference from: URLs....The code to create the tet im usnig is this one:
' a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocument ' a reference to the active sheet. Dim oActiveSheet As Sheet oActiveSheet = oDrawDoc.ActiveSheet ' a reference to the GeneralNotes object Dim oGeneralNotes As GeneralNotes oGeneralNotes = oActiveSheet.DrawingNotes.GeneralNotes Dim oTG As TransientGeometry oTG = ThisApplication.TransientGeometry ' Create text with simple string as input. Since this doesn't use ' any text.
[code]....
but, if i could just edit one existent text filed into the symbol would be great too and one "extra doubt", in all the codes that i get here, i have to erase the "public sub" and the "set" from all code, am I doing something wrong ? I'm running directly from the iLogic window.
View 3 Replies
View Related
May 30, 2013
I am trying to find a way to have iLogic code that looks at a part with only one extrusion, such as bar stock or angle stock and automatically export the length to iProperties. As per the request of the other engineers however, this code cannot be based on a common renamed parameter. Also, since no one draws things the same exact way, it can't be based off of a common dimension parameter either. At least not in terms of d0,d1..etc.
Is there such thing as a code similar to variable=standard.extrusionextentslength that I can imbed within an if then that would pull this information from the model?
View 4 Replies
View Related
