I can open Photoshop just fine, all the buttons work. I can see everything that I'm doing in the layer preview thumbnail, but all I see on the main design screen is the 'transparent' background. The cursor shows up and looks the part of whatever brush I'm using, but nothing happens on the main screen. I haven't even got a chance to use this version
View 11 RepliesI just now installed LR5, converting my LR3 catalog to LR5 catalog. Everything seemed to go fine. I picked one photo and converted to the 2012 process. The new sliders appeared.
The problem: Any changes I make are seen only in the Navigator window, not the main window. I figured there had to be a simple fix, but I've scoured the web and can find no one having similar problems.
As a new user I really prefer the single window mode but have a real problem in that every time I open a filter the window/box that open opens up underneath the single window and I cant see it without minimising the main gimp window. I've played with the preferences windows management options and seem to have all the file options curves etc on top now (these were opening under the single window at one point) but nothing I do seems to want to make the filter boxes open where I can see them - It's making GIMP quite unpleasant to use.
View 2 Replies View RelatedIs there any way to open a new window of your model that is not inside the main window of inventor?
I have two monitors and would like to be able to have another window / view open on the other monitor.
I am using Photoshop CS4 on a 32bit vista Q6600. When I installed CS4, I had a graphics card based on a 8600GS. Photoshop run fine, even in openGL.
Not I upgraded the graphics card to a 9600GT for better performance. CS4 still starts, but when a photo is loaded, the photo appears correctly in the navigator, but the main window where the photo usually appeared remains grey, as the background. When moving around this window, the photo appear, but as soon as I release the mouse button, the window turn grey again...
When I deactivate openGL in CS4, everything seems to work.
I am having the latest NVidia drivers installed 178.24 (with both graphics cards).
I tried to reinstall the driver, no change.
I tried to reinstall CS4, no change.
getting CS4 work in openGL with this 9600GT?
I have just installed Elements 12. I went to open some jpeg images. They appear in the Photo Bin but can't be made to appear in the main window. The Layer Panel shows the background copy of the images.
View 3 Replies View Relatedphotoshop CS2 stoped displaying the red channel correctly on all images. The red channel displays very muted color.
After deleting all preferences of CS2, cleaning out the Windows registry, and upgrading to CS3 the problem still remains.
In CS3 however, the color shift goes away if I drag the image outside of Photoshop's main window.
I have a screenshot of this, http://www.miats.com/tmp/PhotoshopIssue.jpg
Photoshop states that both of the large images are solid R:255 G:0 B:0. However, after print screening the images and pasting them back into Photoshop, it shows that the one on the left is actually R:201 G:88 B:34.
The same thing happens for green and blue as well, though the difference is much less dramatic.
I don't remember changing any settings and my laptop (Win XP, CS2) does not have this problem when loading the same images.
My computer is running VISTA 32bit with 3GB of ram. The graphics card is a NVIDIA 6800.
I have been using lightroom 4. At first it decided that the center image just wouldn't display on some photos. The previews look fine, the selected photo preview seemed to work, but the center image would just gray out like there was no photo at all. I tried to uninstall several things, updated my video drivers, even changed virus protection just in case but nothing worked.
I have the creative cloud, so I uninstalled version 4 and upgraded to version 5. Went into my catalog and almost exactly the same thing started happening. This time, I can see unedited photos, but if I apply a preset the image disappears again. If I click off the photo and click back I can see the image unedited in the main window and the previews show it with the edits. Sometimes I can see the edited photo but at low resolution, but it will not sharpen up to the full image. I even cleared my preview cache just in case but nothing seems to be working.
I don't want to have to re-install windows just to try fix this.I should not that the only thing that changed is that I installed a new Epson printer in windows. I have now uninstalled all but the driver for that printer and still have the issue.
How to switch focus to AutoCAD document window from my form of C# .NET plug-in.
After user pressed the button, I invite him to input a point, but my form still on top.
And it is nessesary to press minimize button, next to set a Focus on Autocad window, then to pick a point.
It is not handy enough.
I did not find a property to set a focus in class of Application.MainWindow.
I'm not sure if Gimp developers are able to assist, but running Gimp inUnity seems to be a bit problematic at times. Because of the global menu,focus on the correct toolbox / area is needed. Furthermore, Unity / Gimpseems to apply the focusing a bit unintelligently. For example, if I moveto another workspace and return to the Gimp workspace, the focus is nolonger on the main window, but rather on the toolbox.
View 6 Replies View RelatedAfter installing Gimp 2.8.4 when i launch program all i get is the Layer-Brushes toolbox. I can't find the main window?
View 1 Replies View RelatedIn X4 I could set the pallettes I wanted (layers and History) to a docked position on the RHS. With X6 the pallettes cover the RH part of the window and the image, with the opened image centred on the whole screen so that the RH part is cut off. It can't be centred within the area visible when the pallettes are open. This gives a smaller visible image if the whole image is in view. This is a serious issue, which X4 handled ok ! I've tried all the options but cannot get X6 to behave like x4
View 3 Replies View RelatedI recently started using Maya on Mac OSX, after having always used it on Linux, and I'm really baffled by the child windows behavior (think Hypershade, Graph Editor, Script Editor, etc...)
The shortcut Cmd+~ does switch focus between the windows, but the child windows always stay on top of the main one. That means that if I open one of these, but need to work in the main maya window, I need to click on the minimize button or double-click the title bar (because Cmd+M doesn't work on these!!!), then need to click in the dock to recall them...
Surely I must have missed something, didn't I? Is there a way to ensure the child windows are hidden by the main window when I switch focus using Cmd+~? On Linux I remember we had a way to set the environment variable MAYA_SET_PARENT_HINT to change this. For sure it's possible under OSX, since that's how firefox / safari and other applications work (switching focus between the different child windows correctly manage which one are in the foreground / background)
I am playing with a design in simulation where the balance is effected by gravity. I have a part at a set angle to start off so a constraint is place and set to this angle,then in simulation I suppress the angle prior to starting the simulation to see what happens. Then I unsuppress the angle then edit it to adjust the simulation to a new angle I then resupress the angle to free it up and run the simulation again.
This can go on a few times until the angle is found in the simulation.The problem I have is it takes ages to do this. Basically it seems in simulation the tree is always collapsed and I want it expanded, how ever after each change the tree collapses?
Is there a way to have the tree always expanded so I can quickly find and adjust my constraint? Or even better is there a way to pull the constraint into the main edit window for direct editing?
It would be good if a small bow / window could be opened with the ability to add a setting/constraignt that needs constant updating.
How do I change Gimp from a Multi-window view to a single window view?
View 7 Replies View RelatedI`ve just installed Inventor student and I can`t use it at all since I can not see anything in the main screen! I`ve installed, reinstalled and nothing
I`ve attached two screen shots - hovering over the main screen I get the options and data showing like the correct thing is happening - just nothing visible!
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
how to show section view in base view with out projection the component.
View 2 Replies View RelatedThe main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
View 2 Replies View RelatedI've loaded a set of brushes I created into CS6. They show up fine in the menu bar brush window, in the Preset Manager, in the Brush Preset palette above my layers palette, but they will not appear in the brush preset fly-out window. This is where I do all the manipulating of my brushes, of course, so this is essential. I have created many, many brushes and done this many, many times and have never had this problem.
View 1 Replies View RelatedI try to resize an image, Photoshop opens the resize image window where it is unviewable, on the top of the screen.
I tried making my resolution higher so i could get more viewable screen, but it's already maxed.
it does not showing command window in civil in 3D 2011 after installing first time.How can i get it?
View 5 Replies View RelatedPhotoshop CS3 10.0.1
Windows Vista
Open two images that are large enough to not fit on your monitor at 100% view.
Maximize both windows. (Do not use F to change to Fullscreen, just maximize the windows.)
Set both to 100% (CTRL-ALT-0)
Use the hand tool to move to another position in the first image. Make sure that Scroll All Windows is NOT turned on.
Switch to the second image. At this point you can use the hand tool to move around, or not. It doesn't seem to affect the outcome.
Switch back to the first image. Notice that it is now not viewing the same portion of the image as you set it to before you switched. I would expect the view to remain the same, there is no reason for Photoshop to reposition the image in the window just because I switched to a different document.
Note that if I perform the same steps, but in either of the two Fullscreen modes, the view position remains as I left it.
if I run this test in Fullscreen mode and then switch back to Maximized, sometimes the windows will behave as they did in Fullscreen mode (i.e. not repositioning), but sometimes they go back to the odd behavior.
All of a sudden and out of the blue this window fails to apprear when trying to save a drawing to another location or to a different file name.
AutoCAD 2011 still has this funciton so have had to go back to using the earlier version.
I am using civil 3d 2012 when i click open and save as not show a window its show command line choose file <c:folder location like this.
View 3 Replies View RelatedBefore i import from my SD card into lightroom I create 2 named folders - one on my hard drive and another for back up on my external hd.In LR inport dialogue box I choose the hard drive folder as my main destination and select my ext hard drive folder as my make second copy to folder
I untick the make a second copy to box.I choose Copy and click import..All images are copied OK but only the hard drive folder shows up in the folders display area under library even though the back up copy shows in the ext hard drive folder.
Is it possible to get both folders to show in the display?
Working with a 3D extrusion layer in CS6. I've closed the secondary view window. Where do I go to get it to display again ?
View 17 Replies View RelatedHow do I view multiple images in one window? I want to compare images side by side, not in tabs.
View 3 Replies View RelatedPSE 10 - Selected pictures will not show up in folder view, but others do. All show up in thumbnail view. In thumnail view under properties it shows the photos as being in the folder, however they don't appear. Double checked hd- they are there. Tried reconnect- says there are none missing.
View 8 Replies View Relatedif you look at the image attached the colours on the right are what the color picker is displaying and if I use that hex code thats the colour the web page displays, but if i fill in any element the colours circled on the left are shown in photoshop.
Why is the color picker window showing a different color to the whats displayed?
When I try and move a corner of my open document with the hand tool to the center of the document window in CS5 when zoomed out, it stops at the edges and will not move inward any further. It is sometimes more convenient to be able to work on a zoomed in corner of a document when it is centered in the document window. If I go to the rotate tool and set a slight angle, I can then move the document anywhere in the window at any magnification! Is there a setting that is locking the document at the edge of the screen when zoomed out?
View 7 Replies View Related