Photoshop :: Maximized Window View ?

Mar 20, 2008

Photoshop CS3 10.0.1
Windows Vista

Open two images that are large enough to not fit on your monitor at 100% view.

Maximize both windows. (Do not use F to change to Fullscreen, just maximize the windows.)

Set both to 100% (CTRL-ALT-0)

Use the hand tool to move to another position in the first image. Make sure that Scroll All Windows is NOT turned on.

Switch to the second image. At this point you can use the hand tool to move around, or not. It doesn't seem to affect the outcome.

Switch back to the first image. Notice that it is now not viewing the same portion of the image as you set it to before you switched. I would expect the view to remain the same, there is no reason for Photoshop to reposition the image in the window just because I switched to a different document.

Note that if I perform the same steps, but in either of the two Fullscreen modes, the view position remains as I left it.

if I run this test in Fullscreen mode and then switch back to Maximized, sometimes the windows will behave as they did in Fullscreen mode (i.e. not repositioning), but sometimes they go back to the odd behavior.

View 8 Replies


ADVERTISEMENT

GIMP :: Change From Multi-window To Single Window View

Apr 17, 2013

How do I change Gimp from a Multi-window view to a single window view?

View 7 Replies View Related

Photoshop :: Windows Explorer Always Opens Maximized In CS6?

May 24, 2013

I have CS6 running under W7 64bit.  For some reason, when I open up WE from within CS6 to select a file to work on, WE always opens maximised.  I think this is new on my system. 

Is there any way to get it back to open not-maximised,  Same problem occurs when I open WE in CS4 but not in PE11. Googling hasn't produced an answer yet.  My display is large and searching across the whole of it is a chore.

View 3 Replies View Related

Photoshop :: Auto Open New Document Maximized

Mar 24, 2008

I am using Photoshop CS2 (9.0.2) on Windows XP (SP2). Whenever I open an image file using PS, the document window constrains itself to the dimensions of the image (IE: if the image file is 20cm X 15cm, the document window opens to 20cm X 15cm dimensions). Can I change it so whenever I open a new document it will automatically maximise the document window?

View 3 Replies View Related

Photoshop :: PS 11 Extended: Documents Open Maximized

Dec 17, 2008

I've just installed and updated PS 11 extended and I've noticed the following change. When I open or create a document it always opens maximized. I hate working like that, I only ever work in floating windows, so every single time I open or create a document I first have to tell it to float.

View 2 Replies View Related

Photoshop :: CS, Window Out Of View

Jan 21, 2005

I try to resize an image, Photoshop opens the resize image window where it is unviewable, on the top of the screen.

I tried making my resolution higher so i could get more viewable screen, but it's already maxed.

View 4 Replies View Related

Photoshop :: CS V.8 Open Windows In 7 Cannot Be Moved / Maximized Or Closed?

Feb 5, 2012

I just installed my Photoshop CS Version 8 into Windows 7 on a new PC. When the program is opened, the File Browser icon does not toggle, and I have to go to File menu to open Browse.

The browser window now cannot be moved, maximized, or closed. The same applies to any image that is opened. Notwithstanding, all the functions of Photoshop are working OK. Since Adobe no longer supports this version

View 6 Replies View Related

Photoshop :: Nothing Showing Up In Main View Window CS6 (64 Bit) - PC?

Sep 9, 2012

I can open Photoshop just fine, all the buttons work. I can see everything that I'm doing in the layer preview thumbnail, but all I see on the main design screen is the 'transparent' background. The cursor shows up and looks the part of whatever brush I'm using, but nothing happens on the main screen. I haven't even got a chance to use this version

View 11 Replies View Related

Photoshop :: How To Reopen Secondary View Window

Sep 22, 2012

Working with a 3D extrusion layer in CS6. I've closed the secondary view window. Where do I go to get it to display again ?

View 17 Replies View Related

Photoshop Elements :: View Multiple Images In One Window?

Sep 10, 2013

How do I view multiple images in one window?  I want to compare images side by side, not in tabs.

View 3 Replies View Related

AutoCAD Architecture :: 2014 Will Not Run With Screen Maximized

Oct 16, 2013

When Autocad is started, it appears to  be in a maximized window (it covers the entire screen and the windows maximize icon in the upper right corner shows maximized, but if I click on the top of the screen I can still drag the location of the Autocad window as though it was not maximized.  Clicking the windows button to show in a window reduces the Autocad window as it should and re-clicking to maximize APPEARS to maximize Autocad, but it can still be dragged from the top of the screen.

This is not a windows problem, because all of my other programs (internet explorer, MS word, etc.) will maximize as they should.

I am running windows 7, 64 bit and Autocad 2014.

View 4 Replies View Related

Illustrator :: Open AI Files Maximized Script

Mar 15, 2013

there has been some talk lately about the Illustrator window not being Maximized when opening Ai files via double-clicking...I don't think this happens on macs though, but if it does, hope this fixes it too.URL....

Please MAXIMIZE the window manually before running the script.

View 10 Replies View Related

Photoshop :: Moving Document View With Hand Tool Locked At Edge Of Window

Dec 9, 2012

When I try and move a corner of my open document with the hand tool to the center of the document window in CS5  when zoomed out, it stops at the edges and will not move inward any further. It is sometimes more convenient to be able to work on a zoomed in corner of a document when it is centered in the document window. If I go to the rotate tool and set a slight angle, I can then move the document anywhere in the window at any magnification! Is there a setting that is locking the document at the edge of the screen when zoomed out?

View 7 Replies View Related

AutoCAD LT :: Can't Add New View Window To Sheet

Jul 5, 2013

In ACLT14, where is the option to add new view windows on a sheet? It appears to be either missing or greyed out on my screen. 

View 2 Replies View Related

Revit :: View Window / Control Bar

Oct 15, 2013

I'm a relatively new user to Revit (almost a year). My issue is that all of a sudden my view control bar is located so far to the left in the view window, the project browser almost covers it. I know that I can move the project browser window so that isn't all that critical. My concern is that when I want to look at a schedule it also is so far to the left of the screen I have to move the other windows to see it.

View 1 Replies View Related

AutoCAD Civil 3D :: Note Labels Scale When Viewport Maximized

Apr 26, 2012

When I maximize a view port, then zoom in or out, the note labels change scale. I like the way C3D General Note Labels rotate and scale with different viewports, but is there a way to stop them from changing when you are just viewing by maximizing? I know that I can zoom first, then maximize and as long as I don't zoom again, the scale won't change, but this is not practical.

Win 7 64BIT
C3D 2013

View 1 Replies View Related

Illustrator :: CS6 - Application Menu Disappears When Document Size Is Maximized

Feb 24, 2014

Whenever I maximize a document in Illu. CS6 it overrides the application menu! It simply covers my whole screen making it impossible to reach my menues unless i drag the documents corners to make it smaller or click the minimize icon.

View 12 Replies View Related

AutoCAD Inventor :: Hierarchic View Window

Oct 10, 2013

Freshly started on an Inventor 2011 student version, I closed a window which showed the elements of a piece in a hierarchic manner (axis, planes, extrusions, holes,... and sublying scetches). How it can be opened again?

View 3 Replies View Related

Revit :: How To Set View Range To Show A Window

Aug 31, 2012

How do you set the view range to show a window with a sill height of 5'-0" and a dog door with a head height of 2' in the same wall on a floor plan view?

View 3 Replies View Related

GIMP :: Expand View Of Brushes Window / 2.8?

Oct 29, 2012

How do I expand the view of the brushes “window” / Gimp 2.8

View 1 Replies View Related

AutoCAD Inventor :: Save Window View Coordinates?

Aug 27, 2013

 Im doing some pictures for a broschure.

There are several products to render out and I like each product to be viewed in same position.

When i rotated the product in a view i like can I save the position coordinates and set them later in another product?

get the same view position all the time? 

View 2 Replies View Related

AutoCAD Inventor :: Window Detail View In A Drawing

Aug 1, 2012

Is there a way so that in the window Detail View,

I will permenantly get a

Fenche Shape: rounded

cutout Shape: Rounded

Disyplay full Detail Boudary: at on

Display connection line: at on

Unless, I have to change them each time...

View 1 Replies View Related

Revit :: Window Family Doesn't Cut In Plan View

Nov 18, 2013

by default.  I forget what but there's some routine to make this family cut properly in a plan view.  Why they made viewing the top of the family the default position I DON"T KNOW but what do you expect from programmers?   

AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013

View 7 Replies View Related

AutoCad 2D :: Edited Window Now Missing In Plan (top) View

Dec 28, 2012

I am using AutoCAD Architecture 2011. I've inserted 3 windows in an exterior wall. They all can be seen in Plan (top) view. I've gone back and changed the height of the windows. Now when I look in Plan (top) view, the windows I've changed the dimensions on are no longer visible.how to make these windows visible again in plan (top) view?

Note: These re-sized windows can be seen in any other perspective except Plan (top) view.

View 0 Replies View Related

Lightroom :: Can View Timecode In Window As Video Is Playing?

Sep 18, 2012

As I screen video clips in Lightroom 4, I'd like to be able to view the timecode numbers in the window so that I can log the footage.  Can this be done?

View 1 Replies View Related

AutoCAD 2010 :: Lost View Command On Menu Bar In Window?

Nov 7, 2012

get the view command back on the list of menu commands as i seem to have lost it.

View 3 Replies View Related

Lightroom :: Unable To View Preview Files In Import Window

Mar 20, 2013

Lr 4.3 ACR 7.3 - unable to view preview files in the import window and/or raw files in the Library?
 
When will this camera be supported?

View 5 Replies View Related

AutoCad 2D :: Unable To View Object Data Table In Separate Window

May 29, 2013

I'm attaching data to objects (attached data) and I'm unable to get the table option to open in a new window. I tried Field and the value is already set to 1. I'm using Map 3D 2012 .

View 1 Replies View Related

Lightroom :: View Window Library - Add And Delete Items - Unable To See The Arrow?

Mar 23, 2013

The view of the window of my Library is not the way it used to be. I miss for instance the zoom, compare, 'spray' tool etc. Recently I could add and delete items, but now I don't see the arrow to do this(?) Here's an actual view of the bottom of the window: I use lr 4.4rc (the problem occured in 4.3)

View 2 Replies View Related

Lightroom :: Maximize / Restore Window Size Does Not Update Library Grid View

Dec 15, 2011

Windows 7 SP 1 64bit German, LR 3.6 64bit German
 
Change to the grid view and resize the LR window by double-clicking the frame title - the window will be resized but the grid view is not updated -
 
maximing the windows --> blank area to the right of the thumbnails (the images in the grid view)press tab two times to if fix the problemrestore the window--> some thumbnails are only half visible or not visisble at all because there is no horizontal scrollbar and the thumbnails have not been wrappedpress tab two times to if fix the problem 

I think I did not have this issue with LR 3.5 - or same problem with LR 3.6?

View 2 Replies View Related

Photoshop :: ACR Window Too Large For Laptop Desktop Window?

Apr 5, 2012

I have just installed my newly purchased PSC5 extended software.  When I try to use the ACR it will load and I can use it but when I try to open, save or cancel my image I cannot.  This is because the ACR window is too 'long' for my Sony desktop window and the buttons I am trying to access are in the 'shadow' of the desktop window.  When I try to resize the ACR window to access the buttons it will let me adjust it on the vertical window edges but not on the horizontal window edges.  I have to reboot the laptop to do anything at all.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved