AutoCAD Civil 3D :: Multiple Direct Links
Aug 22, 2013
why am i not allowed to have multiple direct links for a node (junction/outfall)? i have a situation where i want to add the flows to two junctions, one for each side of the property, then add the two junctions to an outfall (overall site). i do not want to model the pipes, just want to add hydro graphs.
my each junction has two direct links coming from two other upstream junctions, and then this junction flows out by a direct link to the overall site outfall (the set of junctions from the other site does the same). i cannot run the model because of the error:
ERROR 134 : Node TOTAL-EAST has more than one DIRECT outlet link or DESIGN pump.
ERROR 134 : Node TOTAL-WEST has more than one DIRECT outlet link or DESIGN pump.
View 2 Replies
ADVERTISEMENT
Nov 21, 2013
When I use the direct selection tool to select multiple objects that also contain an image within a clipping set, occasionally the clipped image is included in the bounding box, even if it and its clipping mask are not selected. Selecting other objects includes them in the bounding box, but even after deselecting everything the bounding box around the image remains and the only way to remove it is to drag a handle (which resizes the image) and then undo the action. Obviously this is annoying and seriously interrupts workflow. I've had this issue ever since CS4.
View 10 Replies
View Related
Jul 26, 2012
so I am working on tis project in China and rainfall stats and soils are not available, instead i get a measurement of 50 year peak flow at various river sections. in order to model this in SSA I put in juctions with direct inflows at each measured section. is there anyway I can apply an SCS typeII curve to these userdefined inflows to generate volumes for sizing of detention ponds and check dams?
View 1 Replies
View Related
Sep 16, 2013
I have an SSA model that has multiple on-grade inlets along a city street. Each on-grade inlet has a roadway/gutter bypass link defined (the link is defined as 'direct' in the conveyance link properties) and where applicable an upstream roadway link. Therefore most inlets have a direct link coming in and a direct link leaving to represent the gutter bypass flows. The model will successfully run under kinematic wave routing method. When changed to hydrodynamic, I get Error 134 stating:
ERROR 134 : Node CB-13 has more than one DIRECT outlet link or DESIGN pump.
I know that it is fairly self explanatory error except the error does not appear for every inlet that I have defined direct links for. Some inlets that have one incoming direct link and one outgoing direct link are not listed in the error listing, while some do. In review of the model, I do not appear to have multiple direct outlet links (I also don't recall drawing more than one per structure in my model). Based on my review of SSA documents, it seemed like modeling bypass flows using direct links as opposed to open channel flow was the most common practice. That said, if I change the outgoing direct link to open channel, that inlet is removed from the error list.
Version:2014 Civil 3D
View 2 Replies
View Related
Apr 18, 2012
I have a PSPIMAGE file with a plenty of images as different layers. I am adjusting the images having one image "size" as reference (make same width and height). But I could select the multiple images just through layers pallete
whether is possible to select multiple pictures (each in different layer) by using the "pick tool" direct in the canvas (or other means)?
View 1 Replies
View Related
Jan 16, 2014
I am working on my first Animate project. The project has several screens with short paragraphs of text on each screen. Within several of the paragraphs, I need to set up multiple links rather than linking the entire text box to one URL.
If it can't be done, I can set up transparent boxes with the links to sit on top of the text - not the best way to do this but it seems to work. In that case, is there an easy way to "stop" the link just before the user moves to a different place in the timeline?
View 3 Replies
View Related
Dec 9, 2013
I'm developing a custom SA in C#. At some point, I need to get a shape area and a link length from other SA (created with subassembly composer). This SAC subassembly is created before my custom SA in the assembly.
In the DrawImplement function the corrsidorState list of links and shapes is empty...
View 1 Replies
View Related
Jan 31, 2013
I'm building a simple subassembly from generic links and some of the links are blue and some magenta - Is there any significance to this colouring?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 1 Replies
View Related
Mar 9, 2012
I created a simple sub-assembly for a windfarm project but when I bring it into civils none of the links or points show up!
View 3 Replies
View Related
May 8, 2013
On grade Inlet Inlet-01 does not have two outlet links. At least one stormwater sewer pipe and a bypass gutter link must be defined.How do I add another link?
View 1 Replies
View Related
Sep 18, 2013
How are people modeling curb inlet bypass flow? When I first got into using SSA, I looked on-line through some AU handouts and blogs etc. I learned to model on-grade inlets using direct bypass links. I would create one that linked upstream and downstream inlets. It appears that hydrodynamic routing is the preferred option for modeling pipe networks with storage nodes, and the direct links don't work due to error 134. It would seem that the logical fix for this is to model all gutter bypass as user defined open channel and create a channel section that matches the road and gutter section. Is that correct? Also, how does the software view a direct link versus open channel?
View 5 Replies
View Related
Jan 18, 2009
Is there a way to label corridor links in plan view ?. I would like to show my pavement cross slopes from corridor in plan view.
View 5 Replies
View Related
Sep 27, 2013
Testing in C3D2012, using tutorial drawing "Sections-Grade-Label", selecting 2 sections depicting the existing ground and datum. Note that the datum in the drawing stops correctly where it intersects the ground:
However, when I gather the start/end points for the section links I get points that fall outside the limits of the datum section:
The second item appears to be the daylight point, but the first item is at the edge of the section view with an elevation that makes no sense. At the other side, item 17 is the daylight point and items 18-21 do not appear to be related to anything else in the sectionview, other than #21 which is again at the edge of the sectionview. What could these extra points/links be for? Intersetingly, the same section in C3D2014 returns 1 less point and all points through item 17 are identical, but those following all differ.
View 2 Replies
View Related
Jun 26, 2013
I am using Rel 2013 C3D
How do I remove excel data links from my Reference Manager (see attached image). What I have been doing is AutoCad erasing the graphics from my drawing but the link still remains in the xref manager window.
View 5 Replies
View Related
Apr 15, 2014
I'm reconstructing an old document originally developed with PageMaker. I've recreated a half dozen pages hopefully with more uniform techniques. The original line art for the pages was created in AutoCad and some were scans. To bring them into InDesign some of the art is now in psd format and some of the newer art is in Illustrator AI format.
I've noticed that the pages with photoshop art print pretty quickly (about 30 seconds). The ones with Illustrator art take much longer (about 1:30 seconds). They go through a flattening process.
I print these 50 page books on demand and that additional time would add about an hour.
I guess the question is whether this is normal and to be expected or not. If it is I'll likely turn everything into raster before going into InDesign. That, however, seems like quite a bit of extra work. Going from AutoCad to Illustrator (to add stroke) then to PhotoShop to change to raster and then into InDesign seems like a pretty convoluted work flow.
View 3 Replies
View Related
Mar 21, 2013
My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
View 2 Replies
View Related
Apr 4, 2012
Looking for step by step for multiple page setup setting in multiple layout, i use autocad civil 3d 2012.
View 1 Replies
View Related
May 18, 2012
I need to figure out a way to sample multiple surfaces for multiple alignments.
Example 1: I am creating cross sections for a river dredge showing the pre-dredge bathymetry, design dredge elevation, and post-dredge bathymetry results. I have 100's of alignments that I need to sample 3 surfaces and display in profile view. Due to the clients requirements for display, using the cross section tools don't work for me, so I have resorted to using a seperate alignment for each cross section.
Example 2: Working in a subdivision with many utility alignments it would save quite a bit of time to be able to choose a group of alignments and sample multiple surfaces in just a few clicks.
View 3 Replies
View Related
May 25, 2012
Suppose I have a Drawing Structure like:
MasterRoot
Root1
MasterChild1
Child
MasterChild2
Child
Root2
MasterChild1
Child
MasterChild2
Child
When I use XrefGraph xg = mainDb.GetHostDwgXrefGraph(true); in Code then I get all the Files as a node including MasterRoot (say count=6).
If I want to get Only direct Children (here, Root1 and Root2)(means count=2 only), then what i have to do?
View 6 Replies
View Related
Apr 15, 2013
Where the CUI custom files are so I can use them to update a new install of Acad 2010? My computer crashed, and I had to reinstall from scratch, so I just need to get the customization files off the old hard drive and put them somewhere to use for the new install.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 4 Replies
View Related
Jan 20, 2012
Using Acad release 12. Have there been any fixes to direct entry. Draw a 3d 6" cube. On the top surface draw a 2" line from a corner by moving your curser in the direction you wish to go, direct enter 2". It will be a 3" line. Move with direct entry also does not work when placing an object on an object.
View 7 Replies
View Related
Jan 10, 2014
I'm just starting to learn how to use the 3D environment in AutoCAD (2014 version). I'm following some tutorials but I'm a bit confused regarding direct input values when using the polyline command.
I've drawn a 50mm square, starting at coordinate 130,130,0 (lower left corner) using the polyline command (NOT using the Close command to complete the square). The next step then states draw a second polyline using the following input @7<45,55 to locate the first corner, then draw a 40mm square. It doesn't quite put the inner square where I'd have expected it so I wanted to tweek the command to correct any error but I haven't used the @ symbol or < sign before. What the input description means? From testing it appears to base the starting point of the inner square in relation to the outer square.
View 7 Replies
View Related
Feb 17, 2012
add the direct to PDF icon menu item to AutoCAD 2012.
View 4 Replies
View Related
Jun 21, 2013
Direct connect is broken in maya 2014 osx. This now means that dwg, dxf and iges will not import. I have the latest Service pack 1 installed but still no go! This means the only work flow is to do it on a windows version of maya then open it in the Mac.
View 2 Replies
View Related
Mar 16, 2012
We have a bunch of cad files that are loaded onto a sharepoint. Some these users who have read access only are having difficulties opening the files in autocad LT 2012 because .dwl and .dwl2 files trying to be created on the sharepoint site. Is there a way to redirect these files to their locally to their computer? I would like to avoid giving the users write permissions to the site.
View 1 Replies
View Related
Nov 1, 2012
With iLogic, define some pre notes and when the user choose one option some notes are chosen too.The idea now is: Create a text direct inside on Sketched Symbol OR edit some textfields inside the Symbol.
The symbol could be one existent, so its not necessary to create it.
I got a code to create the text, and that works perfectly! Just what im trying now is create this text into the Symbol... I've tried many ways with reference from: URLs....The code to create the tet im usnig is this one:
' a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocument ' a reference to the active sheet. Dim oActiveSheet As Sheet oActiveSheet = oDrawDoc.ActiveSheet ' a reference to the GeneralNotes object Dim oGeneralNotes As GeneralNotes oGeneralNotes = oActiveSheet.DrawingNotes.GeneralNotes Dim oTG As TransientGeometry oTG = ThisApplication.TransientGeometry ' Create text with simple string as input. Since this doesn't use ' any text.
[code]....
but, if i could just edit one existent text filed into the symbol would be great too and one "extra doubt", in all the codes that i get here, i have to erase the "public sub" and the "set" from all code, am I doing something wrong ? I'm running directly from the iLogic window.
View 3 Replies
View Related
Jan 10, 2013
Did 2013 change the way Direct Distance Entry is handled?
Say I want to start a line a distance of 3 from another line using Otrack and a running endpoint snap. Before, I could just hover over the existing line's endpoint, move the cursor in the right direction, and enter 3 on the keyboard. Now in 2013, I need to have Dynamic Input (F12) turned on to get this behavior. 2012 was not this way.
View 9 Replies
View Related
Sep 24, 2011
I am playing with a design in simulation where the balance is effected by gravity. I have a part at a set angle to start off so a constraint is place and set to this angle,then in simulation I suppress the angle prior to starting the simulation to see what happens. Then I unsuppress the angle then edit it to adjust the simulation to a new angle I then resupress the angle to free it up and run the simulation again.
This can go on a few times until the angle is found in the simulation.The problem I have is it takes ages to do this. Basically it seems in simulation the tree is always collapsed and I want it expanded, how ever after each change the tree collapses?
Is there a way to have the tree always expanded so I can quickly find and adjust my constraint? Or even better is there a way to pull the constraint into the main edit window for direct editing?
It would be good if a small bow / window could be opened with the ability to add a setting/constraignt that needs constant updating.
View 2 Replies
View Related
Dec 30, 2013
I am facing small problem with inverter drafting. I am unable to show hidden line of pattern by direct selection of all object . I have to select one by one item from pattern.
In my drawing there is tie rod item ( find attached file) i have shown hidden line of only this part . and i have to select all items one by one.
View 3 Replies
View Related
Jun 8, 2012
I am trying to convert several drawings that are linked to an SQL database to SQL spatial. The drawings are from a Autodesk map 2004 system. I have Map D 2013 64Bit installed on a laptop along with SQL server 2012 RC0 (Microsoft SQL Server Management Studio 11.0.1750.32 Microsoft Data Access Components (MDAC) 6.1.7601.17514 Microsoft MSXML 3.0 4.0 5.0 6.0 Microsoft Internet Explorer 9.0.8112.16421 Microsoft .NET Framework 4.0.30319.269 Operating System 6.1.7601).
To keep my rouge laptop off the company network I exported our existing SQL data to a access database that I placed on the laptop and converted back to SQL and linked it to the 2004 drawings. That part worked fine. I would like to convert all of them to SQL spatial. I have converted a small drawing but it took a couple of hours. I am in the process of a larger drawing that has 60,000 entities and it has been working for 8 hours and only has 4550 of them completed. I am using the output to fdo connection.
View 8 Replies
View Related
Jan 16, 2014
My company produces drawing sets that show the same information in multiple places. I.e. an attribute in drawing A is also shown in a different block in drawing B and a different block in drawing C and in a table. This creates problems in that as soon as one piece of information changes, you have to change it in 14 places... and it creates typos. A LOT of typos. So I'm trying to come up with a good solution as to how to link these pieces of information.
I know how to use data links in a table... but is there a way to link block attributes? Also, am I just barking up the wrong tree? Because in my head, you'd have to manually link all of these things for every new drawing, and they can be easily broken.
View 6 Replies
View Related
