AutoCAD Civil 3D :: Survey Import Event Date / Time?
Jan 9, 2014how i can add the survey date & time from an import event into a field to show how old the data on the plan is?
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Re-import Event Deletes Control Points From Survey Database
Jan 13, 2012Running C3d 2012 here, but haven't used prior versions. I'm using fieldbooks to import survey data. If there is an error of some kind and I "Re-import event" for the fieldbook, then the occupied points from the field book are deleted out of the survey database and I get the resulting error of "point invalid" during the import. My fix is to go into my control drawing and import the control points from the drawing into the survey database then run the "re-import" again.
View 9 Replies View RelatedLightroom :: Import Is Reading Date / Time Wrong?
Aug 3, 2013I'm using Lightroom 5.2RC. My camera is Sony RX100M2.
Everything was working fine until a few hours ago. Then I noticed that a few shots I took late this evening were being imported into yesterday's folder. So I carefully checked what was going on, and noticed that LR import was seeing an incorrect date and time for the file! For example, below you see the date/time it sees for the first image -- that date/time is wrong.
: LR sees the wrong date/time whether I try to import from camera, from SD card in card slot, or WiFi.
Windows Explorer reads the correct date/time of the files, as does the camera, Playmemories etc. Only Lightroom is seeing a wrong date/time. I even uninstalled LR and reinstalled it, and it's still seeing the wrong date/time in import. I have also formatted my card and took new photos, but same behavior.
Lightroom :: Import Photos In Date / Time Sequence?
Aug 10, 2013I have a file on my computer that contains photos from two cameras that took photos over the same three week timespan. I have sorted them by date and time. When I import the file the photos from one camera show first followed by the photos from the other camera. How can I import or resort in LR3 to have photos in date/time sequence?
View 2 Replies View RelatedAutoCAD Civil 3D :: First Time User Creating Contours From An Existing Survey File
May 30, 2012trying to create contours from an exiting survey file. I am new to Civil 3d 2012. What I need to accomplish is create a 3d topo from the points with contours and then create a 3d model of the area.
View 9 Replies View RelatedAutoCAD Civil 3D :: Update Date And Time Stamp In Paper Space
May 1, 2013I created a date and time stamp to put on a border in paper space. The stamps were created using Mtext with a field. The stamps do not update and show the created time and date. How to create a stamp that updates?
View 8 Replies View RelatedAutoCAD Civil 3D :: LandXML Import - Survey Database
Aug 27, 2013Well I have a LandXML and I import the file into the SDB, it gives me line work but only Station Setups. I have no turned angles or points short of the Occupation Points. What is going on here. I have tested this in C3D12 on one PC C3D13 & 14 on another PC and have the same issue. However a co-worker imports to a student version of 12 using my template and gets points and lines.
View 8 Replies View RelatedAutoCAD Civil 3D :: How To Import Survey In PNEZD Text Format
Jul 20, 2012I am a C3D newbie using a clients template file and trying to figure out how to import our survey in PNEZD txt format. The template files I am working with are from WDOT and have many items set up including Point Styles, Label Styles, Description Key Sets, Figure Styles and Layers. I am having trouble figuring out exactly what each of these control/do what I need to create. I know that WDOT uses C3D for design and they translate survey from Cacie to C3D.
I have setup an Equipment Database and Linework Code Set that matches how we code things in the field (Begin=ST, Begin/End Curve= PC/PT, etc.). I am confused as to what exactly the Figure Prefix Database does and how it relates to the other Styles. I have put these in a network folder.
My first attempt using Import Survey Data with the latest WDOT .dwt file produces lines (survey figure) that are all Style=Standard and Layer=0. The points (Cogo Point) are all Style=P RW Circle Filled and Layer=P_MISC.
I also tried the same procedure on an earlier version (Dec. 2011) of the .dwt. This produced lines that had the correct Style and Layer. The points that were NOT shots taking along linework (such as a ground shot, manhole, sign) came in with the correct Style and Layer. What is wrong are the points (shots) that are along the lines (edge of sidewalk, storm sewer, edge of lane) have the Style=<default> (which shows as the P RW Circle Filled symbol) and Layer=P_MISC.
This is all overwhelming me. I feel that it is fairly close though, using the old template.I am not sure what would have changed between the two to produce such different outputs.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
AutoCAD Civil 3D :: Survey Database Settings Change On Import Of FBK File
Nov 20, 2013Recently we have discovered a problem (bug?) with the survey database. We usually import our field data from our Trimble controllers into the survey database (SDB) through Trimble Link. We have been very careful to get all the survey database settings right, so that the data comes through correctly and have been successful up until the last few weeks. We find this a good workflow, where we are able to make edits to our field data (change target heights etc) easily in the SDB and comparisons with Trimble Business Center and direct output on-screen in the controller confirm that our data is reliable. We often have both GPS (long Network RTK vectors from the nearest network base station) and total station observations in the same file.
The issue is that, as the fbk file is imported, the survey database settings change to reflect the content of the fbk file. The "Atmospheric conditions" and "Curvature and Refraction" settings, which I have purposely left unticked (the controller applies these corrections), become ticked. This throws out our heights, especially on the long GPS lines.
We do have the option for a workaround, which involves going back into the Edit Survey Database Settings after import and updating the data in the sdb, but this is clumsy.
This seems to be similar to the issue that was discussed here. However, we have only just encountered this issue in the past month or two, which coincides with when we rolled out C3D 2012 Service Pack 4 across the office. We are planning on implementing 2014 soon, so I have tried it out on 2014 as well, with the same result.
Is this something that others are dealing with too? Perhaps there's some sneaky setting somewhere that I haven't found which locks down the SDB settings preventing them from being changed on import? Otherwise, I think this is a bug.
I am also bracing myself for some comments regarding the dangers of using GPS in the SDB!
Civil 3D 2012 SP4
AutoCAD Civil 3D :: How To Import Multiple Sites (surveys) Into One Survey Database
Apr 17, 2013What is the most expedient way to import multiple sites (surveys) into one Survey database?
Could you import into seperate networks or would you simply import into different point groups?
We are trying to establish multiple surfaces for one project. We are using 2010 & 2012.
AutoCAD Civil 3D :: Import Survey Data Using TXT File - Comment Line Out
Aug 20, 2012I am importing survey data using a .txt file. In that file there are a few lines that I don't want C3D to read. Is there some character I can put at the beginning of the line so that it won't read or give me an error? In some other programs I have seen # or : used to do this.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
AutoCAD Civil 3D :: Import Survey Data Default Point Group Styles
May 3, 2012When you use the Import Survey Data wizard it automatically creates a point group that goes to the top of the list. This used to be created with a standard point style and description, but something has changed and I'm getting a different symbol and label that I definitely don't want as the default. I would think that this would be controled by the CreatePointGroup settings, but that isn't working for me. I can't find any other settings that would override or control this.
(running C3D 2012 sp4, Win7 64bit, 8GB)
Lightroom :: Update Date Time Digitized To Match An Updated Capture Time For A DNG File?
Mar 25, 2013I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies View RelatedAutoCAD Civil 3D :: How To Unlock The Locked Survey Data In Survey Databases
Nov 19, 2013I copied some Survey Data of AutoCAD Civil 3D 2013 for Surveyors to my C3D 2013 machine few weeks ago. Now I cannot do the "Import point file" of the Survey2 Data B in Survey Databases, because the Survey2 Data B is locked up - see the attached file that has a red circle with an arrow on. How I can unlocked the locked Survey 2 Data in the Survey Databases.
View 1 Replies View RelatedAutoCAD Civil 3D :: Survey Figures Don't Match Survey Points
May 3, 2012here's my process:
1- Import the asc file into my drawing.
2- Convert the asc file to a FBK file
3- Import my FBK file. The survey figure linework generated doesn't overlay my previously imported asc file. I checked the FBK file and the coord's match the asc file. I'm confused as to why the survey figures don't overlay the survey points from the asc file, since the coords match in both? The survey figures are all shifted .7' and 54deg. from the points. The elevations are all good on the survey figures, as they match the survey points.
So my quick fix is to explode the survey figures, since I don't really need them for what I'm doing, and then select all the 3d polylines and move them to them to an appropriate survey point. Everything then looks fine and I can get the job done.
However, I would like some insight as to why this might be happening. It's strange that the FBK and asc coordinates match, but the survey figures aren't lying over them.
Photoshop Elements :: Importing To Organizer - Use Photo Date Not Import Date
Dec 2, 2013How do I import photos to elements and have it use the photo date, not the import date?
View 3 Replies View RelatedAutoCAD .NET :: What Event To Be Used To Read Left Click Mouse Location All The Time
Sep 2, 2011I want to be able to read the left click mouse button coordination all the times . Is it possible ?
View 4 Replies View RelatedAutoCAD Inventor :: Print Date And Time
Apr 6, 2009In the drawing title block I would like to place a text reading the print, date and time. This should reflect the current system date and time. I would have this done on the template file so that all new drawings will have this feature builtin.
Is there a property that i can have the text to link to?
Is there any third party program for this?
C1C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD .NET :: How To Convert DD Value To Date And Time Format
Mar 11, 2012i am useing vb.net 2010
Dim AcadApp As Autodesk.AutoCAD.Interop.AcadApplication
Dim acaddoc As Autodesk.AutoCAD.Interop.AcadDocument
AcadApp = GetObject(, "Autocad.Application")
acaddoc = AcadApp.ActiveDocument
Dim DD As Double
DD = acaddoc.GetVariable("tdcreate")
how to convert DD value to date and time format
AutoCAD Inventor :: Turn On / Off Date Time Info
Jul 25, 2012Go to I - button in Inventor, then to the recent files list, hover the mouse over any file in the list.
You will see a preview of the file & later In about a 1 second delay (keep the mouse still) the preview expands a date/time info.
Where switch/checkbox is to turn off/on this date/time info?
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD Inventor :: How To Put Automatic Time And Date On Drawings
Jul 19, 2012I have my autocad drawings setup that in the corner of all autocad drawings the time and date changes everytime you open drawings in autocad. i want to do the samething for my inventor drawings.
View 3 Replies View RelatedAutoCAD 2013 :: Automate The Data Extraction (date And Time)?
Jan 14, 2013I have a need to run a data extraction every night at lets say 2am and have it save to a .csv file.
View 3 Replies View RelatedAutoCad :: Adding Date Time / File Name And Location When Plotting / Printing?
Jun 22, 2011I wan to include the plot date and time as well as the file name when printing drawings. How will I do that?
View 4 Replies View RelatedAutoCAD Inventor :: Plot Stamp Time / Date And File Location?
Jul 15, 2013how to add the plot stamp time/date and file location when printing in autodesk inventor the same as in Autodesk.
View 2 Replies View RelatedPhotoshop :: How To Put Time And Date On Photos
Jun 3, 2013How to put time&date on photos
View 3 Replies View RelatedPhotoshop :: Time And Date Stamp
May 7, 2009how to place a time and date stamp on all my pictures?
View 5 Replies View RelatedPhotoshop :: How To Add Date And Time To Picture
Feb 16, 2004I would like to add date and time that picture was taken into face of picture.
View 5 Replies View RelatedRevit :: Change Date And Time
Jul 23, 2013I've replaced Windows 8 and then when I enter my Autodesk360 I encounter the following warning.I changed the date and time, but this warning is displayed.
View 2 Replies View RelatedLightroom :: How To Get Exact Date / Time
Jun 27, 2012When i import photos (using data data cable) into lightroom (4.1) from my Nikon D7000 (with latest firmware), the capture date/time appears in lightroom +3 hours as compare to original shot.
I usually organize photos date-wise in light room, so pic taken on 26-Jun @ 10pm will be shown under 27-Jun (with time 1am) in light room.
Computer date/time is +3 and accurate (OS: Win 7). Nikon D7000 also configured as +3 and date/time is accurate.
*Note:
- I am in Kuwait which is +3
- When i do the transfer by taking out memory card from camera and inserting it into the camera, it works as expected and i get the exact date/time in lightroom.
AutoCad :: Import Survey Points To Attributes?
Mar 13, 2009Using AutoCAD 2004 full version.
I am trying to import a survey into AutoCAD, and my client requires Attribute points. Normally we do not use attribute points, and I'm not having any luck importing the txt file that I created.
Assuming that I don't know the first thing about attributes (I now know a little, but I'm afraid that it might be wrong), but I know AutoCAD well (for what I do as a surveyor) what is the process of creating an attribute, and importing bulk amounts of data into it. The data would include:
(x) coord, (y) coord, z(coord) for the insertion point of the block Name, Feature_Code, Elev for the Tagged data needing to appear beside a 3d-point representing the x,y,z coords.
Using Land Desktop 3 I am able to create AECC points, but I do not have any Land Desktop experience at all, so I would rather stay away (I have no real need for it).
I do not have any 3rd party software that I know of that creates attribute points from a survey file, except for Trimble Geomatics Office, but it does not give me the format or all the data that I require.
Photoshop :: How Does One Print Date/time On A Photo
Mar 27, 2006I print most of my photos as 4x6 snapshots and keep them in folders for easy viewing. I'd like to be able to print the date in the lower, right corner similar to a photo that's been taken with a camera with a date back. I know this is sacreligious to some, but it's very convenient to have the date where it's readily visible.
View 1 Replies View Related