I print most of my photos as 4x6 snapshots and keep them in folders for easy viewing. I'd like to be able to print the date in the lower, right corner similar to a photo that's been taken with a camera with a date back. I know this is sacreligious to some, but it's very convenient to have the date where it's readily visible.
View 1 RepliesIn the drawing title block I would like to place a text reading the print, date and time. This should reflect the current system date and time. I would have this done on the template file so that all new drawings will have this feature builtin.
Is there a property that i can have the text to link to?
Is there any third party program for this?
C1C1
Inventor Professional 2013
Vault Collaboration 2013
I must have done this when I was trying to do some other keyboard shortcut and got the wrong one - and now I can't figure out how to get rid of it. But a few weeks ago, I did something and now the file name, date/time and image size appear in white text over the top-left of any photo I have in the Develop or Library screens:
So you can see "_MG_0955.CR2" and the other details in the clouds there. How to get rid of that? I can't find anything in any of the menus. I'm on Lightroom 4.3 for Mac OSX Mountain Lion.
in the Book module, I want to print the photo's date under each photo. I only found a way to print caption.
View 2 Replies View RelatedI have included both a text and a date as part of the photo caption on each of my photos. When I have attempted to search for a specific date or year, however, nothing comes up. For example, if I search for my photo on "Fido 1985", I can find Fido, but if I simply enter "1985", I get nothing.
View 2 Replies View RelatedHow do I import photos to elements and have it use the photo date, not the import date?
View 3 Replies View RelatedI am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies View RelatedHow to put time&date on photos
View 3 Replies View Relatedhow to place a time and date stamp on all my pictures?
View 5 Replies View RelatedI would like to add date and time that picture was taken into face of picture.
View 5 Replies View RelatedI can not change date and time
View 2 Replies View RelatedHow i can change the Date and Timestamp on my Photo ?
View 1 Replies View Relateddoes anyone has idea about removing date and time from photos taken by digital camera.I've tried using the clone and crop tools in photoshop but its tedious and has problem of data loss.I would appreciate if someone suggest an action or other method to remove date and time from photos.
View 2 Replies View RelatedCan I add the time and date to a capture it is on my camera and will only show if I was to print but not when I send by e-mail. I have a FujiS5Pro and use Elements 7 the pictures taken will go to UK Courts and used as evidence in our Legal system.
View 4 Replies View RelatedI appear to have come across a problem. Elements 12 Catalog loses adjusted dates.
Feature: right click on photo --> Adjust Date and Time --> Change to a Specified Date and Time
I've noticed the catalog consistently retained dates that include a month, day, and year. However, those that have only month and year have lost the adjustment. Sadly this problem has cost hours of work on possibly over 100 photos and was unresponsive to repair, optimize, closing, and reopening.
How Can I change wrong date and time on a picture using photoshop elements 11 ?
View 1 Replies View RelatedIn Photoshop 9 can I view or sort photos by time taken not just by date taken?
View 1 Replies View RelatedPrevious versions of PSE have displayed the date/time info for each image in the organiser. PSE 11 doesn't do this. Where I can change settings so that it does - this info is very usefu to me.
View 1 Replies View RelatedHow do I get PSE11 t display the date/time groups against each image like we had in PSE10 and earlier?
View 1 Replies View RelatedI need a tool or option in order to set the time/date of a series of scanned slide files into the date/time sequence of my choice (when browsing with the Organizer in "Thumbnail View" (I.e. in Date/time order).
For those slides that I had sent within slide-trays, I asked the scan shop for the following for the photo-files resulting from the scan:That the name of the photo-files include a trailing number reflecting sequence as the slides within their trays.That the scan timestamp sequence reflects the sequence of the slides within their trays (this was and is important for me, in order to be able to browse within the PSE Organizer through the scan-result of one tray, in the same sequence as the slides within their trays; even when the resulting photo-files are not organized in a PSE Album; and even when being in “Thumbnail View” sequence). Unfortunately, the scan shop forgot about this request and I can therefore not look (in Thumbnail View” mode) at the scan results in the same sequence as the slides within their trays.
I am looking for a Windows Tool (or a PSE Organizer Tool/plug-in) that will allow me to set the time of a series of Foto-Files in ascending time sequence. A tool that will for example allow me to select multiple foto files • then, allow allow me to specify the date/Time of the first photo-file within the selected files to the date/time of my choiceand then add an increment of 1 or n seconds (or 1 or n minutes) to each one of the fotos that follows in the selected series. Question: For a Windows 7 and PSE 8 environment are you aware of such a tool? (the scan shop told me, they are not aware of such a tool)
Two details: When looking (before importing the foto files into the PSE Organizer) with Windows Explorer at a folder containing the scanned photo-files I can see the following: the foto files have both a “Date Created” and a “Date Modified”. But they have not yet a “Date Shot”. I do not know, whether this can make it simpler to find a solution.I tried without success, the following within the V8 Organizer, I displayed the photos in “Folder Location” view (in V8, this will show the foto-files of each folder in file-name sequence),while in Folder Location view, I selected all photos of one folderthen, while still in Folder view I did “Adjust Date and Time of Selected items” --> “change to a specified date and time”.
It seems that all selected photos got (exactly?) the same time, Unfortunately this did not work for me. Why that?
After the Time-Adjust, when switching from “Folder Location” view to “Thumbnail View”, the photos of that folder were still in the desired sequence (that looked great and I was happy). After editing one of these photos (and when storing the edited result within a versionset) , the edited version of the photo was still in the desired sequence (this still looked great!). But surprise – surprise..., once I exited from the Organizer and then relaunched it, the Versionset containing the edited Photo changed its position to the end of the series of photos having the same date/time – this was no more its desired position/sequence.
I have spent many hours getting my catalog of pictures in order, only to close the application and come back in to find that it has in fact not saved any of it. Is there someway to ensure that this data is saved so that I don't have to keep redoing this work?
View 6 Replies View RelatedMy G12 Camera is able to super-impose date/time information on the images.
How can I remove this from the images using PS Elements?
I've replaced Windows 8 and then when I enter my Autodesk360 I encounter the following warning.I changed the date and time, but this warning is displayed.
View 2 Replies View RelatedWhen i import photos (using data data cable) into lightroom (4.1) from my Nikon D7000 (with latest firmware), the capture date/time appears in lightroom +3 hours as compare to original shot.
I usually organize photos date-wise in light room, so pic taken on 26-Jun @ 10pm will be shown under 27-Jun (with time 1am) in light room.
Computer date/time is +3 and accurate (OS: Win 7). Nikon D7000 also configured as +3 and date/time is accurate.
*Note:
- I am in Kuwait which is +3
- When i do the transfer by taking out memory card from camera and inserting it into the camera, it works as expected and i get the exact date/time in lightroom.
i am useing vb.net 2010
Dim AcadApp As Autodesk.AutoCAD.Interop.AcadApplication
Dim acaddoc As Autodesk.AutoCAD.Interop.AcadDocument
AcadApp = GetObject(, "Autocad.Application")
acaddoc = AcadApp.ActiveDocument
Dim DD As Double
DD = acaddoc.GetVariable("tdcreate")
how to convert DD value to date and time format
I've been using LR3 for a year or so and have an imported folder with over 7000 images in it all from 2009. The set was originally created in Elements organsier 8.0 probably in 2009?
I have noticed that somewhere along the line 658 of them have had the original capture time overwritten to a single point in time 15th Nov.
They are all JPEG (before I had a RAW camera) and the changes are embedded in the jpg.
This folder has been processed with a few tags and some editing and filtered out rejects.
I would like to get the original time stamp back as the images do not flow with the other 2000+ from the same couple of months.
I do have copies of the originals with correct time stamps - but no tags etc as they were created at time of import.
I have tried copying one of the originals from backup and overwriting the 'wrong date' file using windows and then importing the metadata from file and this rectifies the date - but loses keywords etc
If I use LR to import from back up - firstly it does not see the backup as a duplicate - despite file name being the same - I guess date throws it?? so I end up with duplicates - one on each date ; correct + incorrect
My question is: Is there a way to re-read the original time metadata back into the file/catalog and retain the keyword tags (like a selective merge)?
It would be great to have a solution rather than manually having to identify the incorrect files and copying, Or doing a mass read of original metadata and losing any keywords.
Upon uploading the pictures into the Lightroom 'library' none of them appeared to have the date stamp that they did in camera. After a few minutes, the date stamp for each started to appear. Seeing that they first loaded without the date stamp leads me to believe that I should be able to remove it easily. How can I do this without the hassle of cloning/cropping/editing. Is there a way to remove it from the metadata perhaps?
View 7 Replies View RelatedI have done one job with new camcorder and the time and date stamp is on the video. I have looked all through the manual and I cannot find out how to turn off the time and date stamp. Do I turn off at camcorder or with Premiere Pro? I don't want it on my videos.
View 10 Replies View RelatedGo to I - button in Inventor, then to the recent files list, hover the mouse over any file in the list.
You will see a preview of the file & later In about a 1 second delay (keep the mouse still) the preview expands a date/time info.
Where switch/checkbox is to turn off/on this date/time info?
C1
Inventor Professional 2013
Vault Collaboration 2013
I have my autocad drawings setup that in the corner of all autocad drawings the time and date changes everytime you open drawings in autocad. i want to do the samething for my inventor drawings.
View 3 Replies View RelatedIs it possible to add a 'variable' or label to our title block so that when we send a file to the printer, it will pickup the current time and date?
I know how to edit a label but I want this to happen automatically.