In the drawing title block I would like to place a text reading the print, date and time. This should reflect the current system date and time. I would have this done on the template file so that all new drawings will have this feature builtin.
Is there a property that i can have the text to link to?
Is there any third party program for this?
C1C1
Inventor Professional 2013
Vault Collaboration 2013
I print most of my photos as 4x6 snapshots and keep them in folders for easy viewing. I'd like to be able to print the date in the lower, right corner similar to a photo that's been taken with a camera with a date back. I know this is sacreligious to some, but it's very convenient to have the date where it's readily visible.
View 1 Replies View RelatedGo to I - button in Inventor, then to the recent files list, hover the mouse over any file in the list.
You will see a preview of the file & later In about a 1 second delay (keep the mouse still) the preview expands a date/time info.
Where switch/checkbox is to turn off/on this date/time info?
C1
Inventor Professional 2013
Vault Collaboration 2013
I have my autocad drawings setup that in the corner of all autocad drawings the time and date changes everytime you open drawings in autocad. i want to do the samething for my inventor drawings.
View 3 Replies View Relatedhow to add the plot stamp time/date and file location when printing in autodesk inventor the same as in Autodesk.
View 2 Replies View RelatedI am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies View Relatedi am useing vb.net 2010
Dim AcadApp As Autodesk.AutoCAD.Interop.AcadApplication
Dim acaddoc As Autodesk.AutoCAD.Interop.AcadDocument
AcadApp = GetObject(, "Autocad.Application")
acaddoc = AcadApp.ActiveDocument
Dim DD As Double
DD = acaddoc.GetVariable("tdcreate")
how to convert DD value to date and time format
I have a need to run a data extraction every night at lets say 2am and have it save to a .csv file.
View 3 Replies View Relatedhow i can add the survey date & time from an import event into a field to show how old the data on the plan is?
View 1 Replies View RelatedI created a date and time stamp to put on a border in paper space. The stamps were created using Mtext with a field. The stamps do not update and show the created time and date. How to create a stamp that updates?
View 8 Replies View RelatedI wan to include the plot date and time as well as the file name when printing drawings. How will I do that?
View 4 Replies View RelatedHow to put time&date on photos
View 3 Replies View Relatedhow to place a time and date stamp on all my pictures?
View 5 Replies View RelatedI would like to add date and time that picture was taken into face of picture.
View 5 Replies View RelatedI've replaced Windows 8 and then when I enter my Autodesk360 I encounter the following warning.I changed the date and time, but this warning is displayed.
View 2 Replies View RelatedWhen i import photos (using data data cable) into lightroom (4.1) from my Nikon D7000 (with latest firmware), the capture date/time appears in lightroom +3 hours as compare to original shot.
I usually organize photos date-wise in light room, so pic taken on 26-Jun @ 10pm will be shown under 27-Jun (with time 1am) in light room.
Computer date/time is +3 and accurate (OS: Win 7). Nikon D7000 also configured as +3 and date/time is accurate.
*Note:
- I am in Kuwait which is +3
- When i do the transfer by taking out memory card from camera and inserting it into the camera, it works as expected and i get the exact date/time in lightroom.
I can not change date and time
View 2 Replies View RelatedI've been using LR3 for a year or so and have an imported folder with over 7000 images in it all from 2009. The set was originally created in Elements organsier 8.0 probably in 2009?
I have noticed that somewhere along the line 658 of them have had the original capture time overwritten to a single point in time 15th Nov.
They are all JPEG (before I had a RAW camera) and the changes are embedded in the jpg.
This folder has been processed with a few tags and some editing and filtered out rejects.
I would like to get the original time stamp back as the images do not flow with the other 2000+ from the same couple of months.
I do have copies of the originals with correct time stamps - but no tags etc as they were created at time of import.
I have tried copying one of the originals from backup and overwriting the 'wrong date' file using windows and then importing the metadata from file and this rectifies the date - but loses keywords etc
If I use LR to import from back up - firstly it does not see the backup as a duplicate - despite file name being the same - I guess date throws it?? so I end up with duplicates - one on each date ; correct + incorrect
My question is: Is there a way to re-read the original time metadata back into the file/catalog and retain the keyword tags (like a selective merge)?
It would be great to have a solution rather than manually having to identify the incorrect files and copying, Or doing a mass read of original metadata and losing any keywords.
Upon uploading the pictures into the Lightroom 'library' none of them appeared to have the date stamp that they did in camera. After a few minutes, the date stamp for each started to appear. Seeing that they first loaded without the date stamp leads me to believe that I should be able to remove it easily. How can I do this without the hassle of cloning/cropping/editing. Is there a way to remove it from the metadata perhaps?
View 7 Replies View RelatedI have done one job with new camcorder and the time and date stamp is on the video. I have looked all through the manual and I cannot find out how to turn off the time and date stamp. Do I turn off at camcorder or with Premiere Pro? I don't want it on my videos.
View 10 Replies View RelatedIs it possible to add a 'variable' or label to our title block so that when we send a file to the printer, it will pickup the current time and date?
I know how to edit a label but I want this to happen automatically.
I am trying to figure out how to remove the date/time stamp from my photos.
View 1 Replies View RelatedHow i can change the Date and Timestamp on my Photo ?
View 1 Replies View RelatedI have shots from a trip done with two different cameras, however the time stamps are different by one day and one hour. I would like to globally change the creation date and time on one of the cameras in the Metadata, or perhaps change one and sync with the others.
View 3 Replies View RelatedI converted my catalog from PSE7 to the latest version of Lightroom and it appears that many bad things happened with the dates that I had set on my pictures in PSE7. In some cases, I can see that the Date Time Original and Date Created fields have transferred over but in most cases I cannot see anything other than the original date that I created the picture or brought it into PSE. Since many of my pictures were scans of 100+ years old pictures, I've now lost some important information that I added by using the Adjust Date and Time feature in PSE7. Is there any way to recover this?
View 2 Replies View RelatedI'm using Lightroom 5.2RC. My camera is Sony RX100M2.
Everything was working fine until a few hours ago. Then I noticed that a few shots I took late this evening were being imported into yesterday's folder. So I carefully checked what was going on, and noticed that LR import was seeing an incorrect date and time for the file! For example, below you see the date/time it sees for the first image -- that date/time is wrong.
: LR sees the wrong date/time whether I try to import from camera, from SD card in card slot, or WiFi.
Windows Explorer reads the correct date/time of the files, as does the camera, Playmemories etc. Only Lightroom is seeing a wrong date/time. I even uninstalled LR and reinstalled it, and it's still seeing the wrong date/time in import. I have also formatted my card and took new photos, but same behavior.
I have a file on my computer that contains photos from two cameras that took photos over the same three week timespan. I have sorted them by date and time. When I import the file the photos from one camera show first followed by the photos from the other camera. How can I import or resort in LR3 to have photos in date/time sequence?
View 2 Replies View RelatedI do not have ANY page options checked in the print module and yet it continues to print a date/time stamp in the margins of my photo. I want to display this photo in a clip frame so there is no mat and I chose 8.5x11 so I wouldn't have to do any cutting. I don't mind the white border.
How can I get rid of this extremely annoying feature?
I am creating photo scenery for Flight Simulator X - my source files are large bmp's. From each of these I create a greyscale file which I Save As a tif file. However, when I recompile the bmp and tif together, I get error messages. Most common is a reference to Date/Time being incorrect.
If I load the tif file in GIMP, it reports "Incorrect Count for field DateTime (21, expecting 20); tag trimmed" - If I then save the tif in Gimp, it recompiles without errors.
does anyone has idea about removing date and time from photos taken by digital camera.I've tried using the clone and crop tools in photoshop but its tedious and has problem of data loss.I would appreciate if someone suggest an action or other method to remove date and time from photos.
View 2 Replies View RelatedCan I add the time and date to a capture it is on my camera and will only show if I was to print but not when I send by e-mail. I have a FujiS5Pro and use Elements 7 the pictures taken will go to UK Courts and used as evidence in our Legal system.
View 4 Replies View Related