AutoCAD Civil 3D :: Swept Path Software
Feb 15, 2013I'm looking at two programs for swept path analysis (primarily for wind turbine transportation applications ) i.e. AutoTRACK and AutoTURN.
View 9 Replies
ADVERTISEMENT
AutoCAD .NET :: Swept Solid - Align To Path
Nov 11, 2013I'm trying to create a swept solid that is aligned to its path but the solid appears in a different position to the path.
View 1 Replies View RelatedAutoCAD Inventor :: Unable Dimension To Swept Feature
Jan 9, 2014I'm having an issue where while in the .idw it allows me to select the quadrant of the swept feature but then it says it's not attached.
I don't ever remember not being able to place these types of dimensions.
AutoCad 3D :: FLATSHOT Not Hiding Obscured Lines In Swept Solid
Nov 19, 2012I have a swept solid that FLATSHOT will not hide the obscured lines for. In the FLATSHOT dialogue box, I have tried all options, with different results. Any setting that I can change or alternate method that I can use to get 2D geometry from this solid that I can use in my 2D drawing?
View 8 Replies View RelatedAutoCAD Civil 3D :: PDF Memory Path
Jan 31, 2013When you plot to pdf in Civil 3D, my problem is that I need to go through all the different folders to the folder that I wish the PDF to be saved, and when I PDF the next drawing, I need to go through all the folders again to find the same location folder in which to save the PDF.
There is surely a memory path that saves to last saved location, rather than having to go through the different folders and sub-folders each and every time.
Before my upgrade to 2013 from 2012, it would save in the last saved location, now it defaults back 'my documents' on my C' drive.
AutoCAD Civil 3D :: Set Project Template Path
Jan 2, 2014C3D 2012 SP4
Win 7 Pro
When creating the short cut folder you have the option of using a project template. Instead of browsing for it all the time , can a permanent path on a network be set to look for the project template everytime?
AutoCAD Civil 3D :: Re-path Data Shortcut
Sep 18, 2012I want to be able to repath a data shortcut I have on my drawing to a file thats on my C: drive, how do I do this? Its just for this one drawing I want to do it with, so the Data Shortcuts Editor is no good to me.
View 4 Replies View RelatedAutoCAD Civil 3D :: Extending End Of Alignment Along Its Path
Aug 21, 2012Sometimes we need to extend the end of an alignment along it's path, whether it is a tangent or curve. I don't know of any tool to do this. Is there such a tool?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
AutoCAD Civil 3D :: File Name And Path Change With Shortcuts
Apr 25, 2012Have existing hotel site plan project folder and I copied it to new location and renamed folder and file names I have a grading plan that has spot elevations from data shortcut referenced surface. Is there a way to reference the new revised surface, that has same name and have the elevations update with the new surface and then delete the original referenced surface.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
AutoCAD Civil 3D :: Can't Change Source File Name Or Path?
Nov 12, 2013What exactly is this tool used for if you cant change the source file name or the path? and why would the interface let me poke into these fields and give me the option to find and replace if they cnnot be edited
So how can I change the Source File name and path?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
AutoCAD Civil 3D :: Path Array For Slope Labels?
Apr 4, 2012I have a polyline defining a proposd wind farm access track and I have offset it 10m each side. I have then dreated a slope label between the southernmost end points which gives the existing ground slope at right angles to the centreline. I created the Array (as shown in arrayed.jpg) and it looked good but after hitting enter there were only three labels (after enter.jpg)
I did a rectangular array of slope labels with no problem at all so what's wrong with the way I'm doing the path??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: Find Path Of Determined Slope Along A Surface?
Oct 25, 2013I am trying to draw an alignment for a road. I want the alignment to represent the outside of the curve as the road climbs up and around a mound. Is there not way to do this in Civil 3D?
[URL]
and now I am thinking I will have to do this manually, extract contours, and trim/extend my way to victory...I really would like to have this in a dynamic situation so I can make adjustments. Also, it would be adventageous to have the line actually follow the grade so I dont have to add curves in etc later...
AutoCAD Civil 3D :: 2012 XREF Via Relative Path Failure
Jul 27, 2012Periodically, when I try to create an XREF using the Relative Path option, C3D will tell me that it can't use the relative path. But if I then close the drawing and reopen it, the command works just fine. why C3D sometimes fails to do this, or why closing and reopening the drawing fixes the problem.
Never saw this problem before C3D 2012.
AutoCAD Civil 3D :: Incorrectly Displaying Full Path Of Drawing
Jun 10, 2011In Civil 3D 2012, if you enable the option of "Display full path in title" under the Options --> Open and Save --> File Open area, the active drawing name and path displayed in the Tittlebar is not correct?
I've noticed this when the drawing window is maximized, didn't check when restored. Win7 (x64), EVGA 790i, 8GB RAM, EVGA 8800GT, 250 GB iSSHDD, & RAID 0/1
AutoCAD Civil 3D :: File Path Visible On Top Of Session Window
Oct 30, 2013How to set the drawing file path so it shows up at the top of my screen when I am in an autocad session? Currently all I see is "Autocad Civil 3D".......
View 5 Replies View RelatedAutoCAD Civil 3D :: Survey Database And Data Shortcut Path
Feb 15, 2013How do you move a survey database and data shortcuts? Without going into details, sometimes it is necessary to copy portion of projects as new projects. The survey database along with the drawings our surface, points, linework, etc. need to reference the new directory. I can set the survey database folder location to the new path but am not certain the information in the dwg is point to the correct location.
The same essentially applies to the data shortcuts. I'm having trouble getting this to work. With LD we were able to copy the project and resuscitate the drawing(s). I tried to use Data Shortcut Editor with the Saveas. I then attempted to rename the dwg's and path the new location and name but receive an error of Invalid source file. Correct the path or press Esc..
AutoCAD Civil 3D :: Link Path Of Survey Database In Drawing
Mar 25, 2010Is there a way to link the path of the survey data base in the drawing, so I do not have to set the working folder every time?
View 9 Replies View RelatedAutoCAD Civil 3D :: Change Data Reference Path In Current Drawing
Jul 12, 2012i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.
if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.
They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.
one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
AutoCAD Civil 3D :: Macro File Not Found At Original Path Specified In Subassembly
May 4, 2008I just opened my corridor drawing for the first time in 2009 and was greeted by this error:
Macro file not found at original path specified in subassembly. Updated macro file location to path defined by AECCCONTENT_DIR environment variable.
I'm not familiar with the maco file and the only post I found relating to this said the AECCCONTENT_DIR environment variable was abandoned in 2007.
AutoCAD Civil 3D :: Change Source File And Path In Data Shortcuts Editor
Sep 18, 2013I need to update both the path and the Source file name in Data Shortcuts editor. If I update the path, it looks in the new path for the old file name, and throws an error. If I update the File name, it looks in the old path for the new file name, and throws the same error.
View 6 Replies View RelatedAutoCAD 2010 :: Change Xref From Full Path To Relative Path?
Jul 11, 2012I have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedAutoCad :: Change Xref From Saved (full Path) To Relative Path?
Aug 31, 2012Is there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedAutoCAD 2010 :: Converting Xrefs With Relative Path To Full Path?
Nov 12, 2012I have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedAutoCAD Inventor :: How To Create Path (from Sktech3D) As In Input To Add Using Path
Feb 9, 2012Actually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
AutoCAD .NET :: How To Fetch XREF Found At Path When Using No Path While Attaching
Mar 1, 2013I am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database;
using (Transaction Trans = db.TransactionManager.StartTransaction()) {
BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true);
db.ResolveXrefs(false, false);
[Code] ...........
Photoshop :: Creating Work Path On New Layer The Path Is Grayish Black Color
May 6, 2013When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedIllustrator :: Create Single Path To Type On Not Compound Path From Many Paths?
May 11, 2012I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
Illustrator :: Reduce Anchors Points In Segment Path Without Altering The Path?
Aug 31, 2013In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
Photoshop :: Can't Select Stroke Path While Work Path Is Selected (CS6)
Aug 20, 2012I'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View Related3ds Max :: How To Re-path Material Library With Bitmap/ Photometric Path Editor
Jan 25, 2012I have a bunch of material libraries that need to be re-pathed as I have moved my textures, the Bitmap/Photometric paths editor has a tickbox that says "include material library" which leads me to believe that it will list, for re-pathing, all materials in my library.
However, it doesn't seem to do anything for me even though the library i need to re-path is loaded into my Material/map browser.
Illustrator :: Convert Text Path Back Into Line Path In CS 5?
Jan 9, 2013I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View Related
