AutoCAD Civil 3D :: Polyline Drawing - Orbit View
Apr 18, 2012I have an existing drawing with 3D polylines, I try to orbit to veiw it in a different view and all i get is a line.
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Do Snap With Surface On Orbit View?
May 6, 2013I have my surface, I'm seeing it in orbit view mode . (also it doesn't work on 2D...)
I'd like to create a 3d Poly using some points on the triangles of my surface....
I'd need a transparent Inquiry tool , to use when I create points or 3dpols
I think it is basic....
I know _AeccFeatureElevsFromSurf
but i'm talking about a 3d Snap....
Civil 3D (2013) how much you have to improve....
AutoCAD Civil 3D :: Opening Drawing In 2013 And Drawing View Changes?
Nov 28, 2012Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedAutoCad 2D :: Drawing Polyline To Have Tooltip Box Show Cumulative Length Of Polyline
Nov 6, 2013Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedAutoCAD Civil 3D :: 3D Orbit Causes Fatal Error
Nov 15, 2013Sometimes 3D orbit works perfect, and sometimes it causes a fatal error before you even get started with it. I originally thought it was just large 3D objects causing it, but now I think it's just a 2014 issue...because I've had simple 3d surfaces (3d polyline with a surface) that have caused it to crash, yet have other larger surfaces that orbit without issue. I'm mostly using it to compare 3D polylines to surfaces, usually on as built alignments that we're working on.
View 9 Replies View RelatedAutoCAD Civil 3D :: How To Keep COGO Points Visible In Orbit
Mar 1, 2012When I go into 3dorbit, or orbit mode, as I am panning moving around in space I can still see the points. As soon as I press 'Esc' or 'Enter' the points dissapear, how can I get them to stay visible?
View 2 Replies View RelatedAutoCAD Civil 3D :: 3D Orbit For Surface-2d Banding Too Slow
Apr 19, 2013I have a surface volume analysis with 2D banding..Regardeless of it is a +- surface and it is not at the right height location, I want to see it in 3D. uffffff, 30 seconds waiting to acad ....
I have a good pc (wirth a superb nvidia) (I have no problems with any other software or 3D actions)
First , I have to wait almost 30 seconds before have the 3D mouse movements avalaible.
Second, every mouse move ( to change the point or view, etc ) means 3 seconds of delay.
The model is little , 400 x 600 meters. (It is an example from mastering c3d) .
AutoCAD Civil 3D :: Section / Section View Of A 3dpolyline Along The 3d Polyline
Oct 12, 2012I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedAutoCAD Civil 3D :: Convert Metric 3D Polyline To 2D Polyline
Jun 29, 2013I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedAutoCAD Civil 3D :: Rotating View Of A Drawing
Oct 10, 2012My company has just upgraded from stone age AutoCAD to Civil3d 2013 and I've been tasked with figuring out the program.
What I am trying to do is realign my drawing so a line I drew is horizontal to the page. For example, I have a line at a 45 degree angle and I want to rotate my viewport so that line is now at a 0 degree angle. Is there a simple way to do this?
A follow up: I have my point labels set to be a 45 degree angle, will they be at a 45 degree angle when I realign the drawing or will they "rotate" along with the drawing?
AutoCAD Civil 3D :: Drawing Initial View
Jun 5, 2012When opening a drawing, since I've installed 2013, I don't have an initial view or preview of the drawings I'm selecting. In the open box, the "Initial View" or "Select initial view is unchecked and won't let me put a check mark in so I can review the drawing before opening.
View 9 Replies View RelatedAutoCAD Civil 3D :: Unable To See Drawing On Preview View
Jun 4, 2013I can't see the drawing on a preview view when I am trying to open some existing drawing with Autocad Civil 3D 2013.
View 7 Replies View RelatedAutoCAD Civil 3D :: Align Polyline Onto Another Polyline
Mar 22, 2012Any way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
AutoCAD Civil 3D :: Drawing Template For Multiple Section View Production
Feb 21, 2012How can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200 ?
Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.
AutoCAD Civil 3D :: Copying Profile View / Object Style From One Drawing To Another
May 20, 2013How can I copy a profile view style from one drawing to another? I can't seem to locate the ones I created in toolspace to be able to drag them from one drawing to another.
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Convert 3D Polyline Contour To Polyline Contour
Mar 24, 2013How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedAutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another
May 6, 2013Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedAutoCAD Inventor :: Projected Drawing View Doesn't Show / Design View Rep Don't Update
Sep 27, 2013After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
AutoCAD Inventor :: View Label In Base View / Drawing?
Nov 25, 2008Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View RelatedAutoCad 2D :: Snap Not Working After Drawing Polyline
Jul 17, 2012After I drawn a Polyline or rectangle, I wasn't able to Snap the Object. So measuring was a hard thing to do.I found a solution to this bug: Disable the Linetype Generation. After that snapping will work again.
This problem occurred out of nowhere. It always worked without changing the linetype generation.
AutoCad 2D :: Drawing Polyline - Cursor Snapping / Lagging
Apr 5, 2011When I go to draw a polyline, it feels like the snap mode is on and it takes forever to select my end point. It's almost as if it is lagging behind. I did not see this problem until I upgraded to 2012 last week. Going back to 2011, it seems to be doing the same thing.
View 8 Replies View RelatedAutoCad :: Architectural Drawing - Levels Show In Model View But Not In Drawing?
Sep 14, 2011The layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies View RelatedAutoCAD 2010 :: Command For Drawing A Polyline Through Multiple Points
Feb 15, 2012This is something I should know as a long time CAD user. I have line of points, ~200 on the screen and I want to draw a polyline through them without selecting each point. I know there was a command to select the first point and the last and ACAD would draw the line between. I am using AutoCAD 2010.
View 3 Replies View RelatedAutoCAD VB :: Drawing Closed Polyline Use The Effect Looks Like WPolygon Of Select
Mar 30, 2012I need user to draw a closed ployline. Is it possible to use VBA to code a procedue that the effect looks like the WPolygon of select ?(2 rubber-band lines)
View 1 Replies View RelatedAutoCad :: Reduce File Size Using Polyline Instead Of Line While Drawing?
Apr 26, 2011I've heard that you can reduce file size using polyline instead of line while drawing (or vice versa... don't remember) is it true and what exactly should be used. I think, why we would need the line tool at all if polyline more convenient.
View 9 Replies View RelatedAutoCAD 2010 :: Set Polyline Width - Showing Blank Lines In Other Drawing
Apr 18, 2012I have a problem in polyline width. when i set polyline width in one drawing shows solid line & in another drawing shows blank lines.
View 9 Replies View RelatedAutoCAD Civil 3D :: Mark Items In Alignment View To Display In Profile View?
Dec 20, 2012I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
AutoCAD Civil 3D :: Profile View Empty Or Missing - Cave-in - Section View
Nov 28, 20121. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
AutoCAD Civil 3D :: 2013 / Changing TOP View To TOP-Front View For 2 Overlapped Points
Sep 23, 2013I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedAutoCAD Civil 3D :: How To Create A Section View For A Pond Other Than Quick View
Oct 1, 2012how to create a section view for a pond other than quick view.
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Choose Right Templates / View Ports / View Frames
Aug 26, 2013I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the 2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file. what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.
View 1 Replies View Related