I have created a new point style in a new drawing that I am not familiar with. When I am in model space the points are HUGE, when I am in paper space they are the 2mm that I want them to be.
I think there was a scale setup somewhere but I cannot seem to figure it out again.
Modifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I need to scale the trunk and canopy on importing of a points file. I can scale one parameter through the description keys (So i have been doing the canopy) but would like to do both. My code is Tree 0.5 10. Parameter one being the trunk diameter and parameter two being the canopy size.
View 4 Replies View RelatedI am trying to have a block scaled on import baised on the elevation of the point. I already use description key sets to scale blocks in import to parameters added to the code libary, for example; "Pole 0.31" draws a circle with a diameter of .31 meters.
Is there a way where I would be able to scale a block on import based on the elevation of the object? For example, a point's elevation is 1.7m, so on import it would scale a block by 1.7 on the x/y axis. Ideally if I were to modify the datum of the points the blocks would automatically scale, but that is more of a pipe dream.
We import the data from a trimble r8 rover and convert the file to a FBK file before importing the survey data.
I am having trouble getting my Civil3d line labels to adjust with the annotative scale.
View 4 Replies View RelatedThe label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedCan I scale up a 100+ blocks at once and have each base point as the blocks insert point?
View 9 Replies View Relatedam in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
Civil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedIm still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedI have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
In uploading the Point input data into the AutoCAD Civil 3D 2013 software program, is it possible for me to add more Point Attribute items after Point Number, X, Y, Z? I need to have the chemical results/data attached to the (sampling) Point that has the Point #, X, Y, Z - like Point Number, X, Y, Z, Arsenic, Lead, Mercury in the input .txt (or .csv) file.
View 9 Replies View RelatedHow to set a default point style for point groups? Whenever I import survey points, I always put them into their own point group, so I can display each day's worth of survey data differently. For some reason, the point style always defaults to a certain style (our control point symbol). I'd like it to default to Basic, so I don't have to change this every time. Is it a template drawing setting somewhere?
View 5 Replies View RelatedFirst time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
C3D 2012
Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:
I am trying to get point 1234 to show a label that says Point #1234 and then in a grading plan have that same point show up as a spot elevation. I have tried making two point groups "Point #" and "Spot Grades" which include the same points in them with two different label styles for each group, however the point seems to only want to take one label style at a time.
C3D 2012
Win 7 x64
8 GB Ram
Quadro K4000
I've tried using the new scale bar in Map 2013. But when I try to insert it inton my map, the size of the scale bar makes it huge, it's way bigger than the layout. How do I decrease the size of the scale bar?
View 1 Replies View RelatedI made the mistake that I came to measure my object as cm but inventor writes it's in as mm, is there a way where I can scale objectet up giving it the right size
View 3 Replies View RelatedI am using CAD LT 2005 but also have access to AutoCAD 2005.
I am unsure about the best way of dealing with text in drawings. Originally I used to put my text in model space - which was fine until I started using multiple layouts in paperspace at different scales. The text would come out either to big or too small.
Others in my office say they put the text in paperspace ONLY at the right scale for that layout. This is fine until you realize that if you have to put text in 4 different layouts at 4 different scales 4 different times it takes forever.
So - I looked up about a command called SPACETRANS which seems to offer a way of working out the right scale for the text in paperspace. EG. Working in mm in model space a good text height for me was 1000. By using the spacetrans command in paperspace I worked out that the text height to be used here was 9.2. This basically gave me my text in paperspace at the relatively same height as it looked in model space.
I now realize that although I can scale my text happily to the right size in all my layouts it hasn't negated the need for me to type it all in many times over. Basically, I still have to type the text into paperspace at the right scale - in this example at 9.2.
How you can type your text in once anywhere (probably model space) and then scale it in all the different viewports without having to retype it all in?
Is there a way to scale from D size to E size when creating a pdf?
View 4 Replies View RelatedI've just recently changed jobs and so I'm working on a new (to me) system with Autocad Mechanical 2013. I had been working with Mechanical 2010.
One (of the many) issues that is bothering me, is that I can't seem to scale resize individual dimension. Normally, I'd create the dimensions and then if I needed to tweak the fit, I'd go into the Properties pallet and change the overall scale under Fit. Not really a good standard of practice, I know...
But when I do that on my current system, the dimension doesn't change at all.
On top of that, I have a weird refresh problem. If I grab a dim by the grip and move/stretch it, it doesn't actually show the new position unless I Regen. Is that a setting or maybe just a slow reaction by my computer?
When i import a pointcloud into revit the scale is not right. Is there a way to fix this
View 1 Replies View RelatedQuestion 1: Is it possible to change a Survey COGO point to a regular COGO point so you can edit the datum?
If not:
Question 2: Is it possible to transfer the survey database from one office to another so the end office can make datum changes to the survey COGO points. Will the link between the file and the database still apply?
C3D 2013
Windows 7 64 bit
I'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
View 9 Replies View RelatedI can control the size of my main drawing views using ilogic based on the models extents as there is a direct relationship between a parts length and the drawing view width. however, I have several isometric views that I scale according to the model size but in certain configurations of my model the ISO’s are completely the wrong scale for that particular view where the main views are ok.
I have a set area on my drawing sheet for the iso view and it would be more beneficial to control the size of the view rather than the scale of the view. I can read the height and width of a view so why can’t I control the size of a view but the height or width?
how to scale life size models in AUTOCAD. I know that a draft should be in a 1:1 scale but lets say I want to draw a plane with exact dimensions measuring the wingspans. How would I set my limits in the command prompt to a specified area. I just don't quite understand the concept of how to calculate an accurate scale then plot the scale with a visible text/title scale upon printing.
View 7 Replies View RelatedI set up a new page thus (I live in a country which uses metric units, so ...):
Drawing Units Setting18-07-2013 9-24-06 AM.jpg
Then:
Command: '_limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0.00,0.00
Specify upper right corner <3.5000,2.7000>: 3.65,2.74
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 1000,1000
Specify radius of circle or [Diameter]: 250
Command:
and I get:
Range Problem 18-07-2013 9-36-57 AM.jpg
The circle was centred at x=1000 metres, y=1000 metres, yet it displays right down at the bottom left of my screen. Compare the radius of the circle to the distance from the centre to the origin - it's nothing like 1:4! Look at the coordinates for the cursor!
Zooming in and zooming out has no effect on the huge dimensions indicated by the coordinates.
I know this must be simple because it is not mentioned in any textbook or tutorial I have been able to find. Authors don't seem to think it is important, but it's driving me nuts! The question is this:
How do I set the page size and grid scale to something sane?
I am pretty sure that this scale problem is at the root of many of the other problems I am having. A14 is doing it's job faithfully but the display is so small that I cannot see what is happening !
I set a border up to be 24"x36" and it appears to be slightly outside the dotted lines for paper space when I x-ref it in. I also noticed on my plots that 3'-0" is measuring close to 3'-1" which means I have screwed something up.
I have the plot settings set to "Extents", "1:1" and I am using the Cute PDF plot driver.
Instead of creating a border that is 24"x36" do I need to create one that is exact to the printable area to make it the right scale? Not sure what the printable area is or how I figure it out though. Lost.
I have been looking through a ton of threads and can only find half an answer to what I'm looking for: When I draw in mm, I have to set the scale of the viewport to 1:30 or somewhere in that range. But in reality, the object that Im drawing isn't 1/30th of the size that it prints. How do I get the scale right to print the object at its actual size? cad 2013
View 9 Replies View RelatedBy working in millimetres instead of metres will slow things up with my file. My 0,0 point refers to the actual survey co-ordinates which I need to continue to use as regularly share my file with the surveyor and we need to be working on the same 0,0 point. Because I am working in mm 0,0 is therefore further from my drawing that it would be in m. Will changing to metres make a significant difference to me? My file has 34 layout pages and even more viewports which I would have to re scale if I changed the units in my drawings or is there a simpler way of doing this than rescaling the drawing by a factor of 0.001?
View 4 Replies View Related