AutoCAD Civil 3D :: Invalid Sheetset - DST Can't Be Found
Jun 5, 2007
We have a project that uses a sheetset for drawing management and plotting.
On one pc the sheetset opens up fine when a drawing is opened.
On a second pc we get a message saying that the .dst can't be found.
If we then try to open the .dst via the open command on the sheetset manager we receive a dialog telling us the sheetset is invalid.
Both PC's are identical with the same network access rights etc. and both running C3D 2006.
View 2 Replies
ADVERTISEMENT
May 10, 2013
I have extensive photoshop files of early work and when attempting to open them, a warning, "could not complete because of unknown or invalid jpeg marker types found".How can these be saved or retrieved?
View 1 Replies
View Related
Dec 30, 2012
It happens when I try to use the "back" button on the web page when reading posts.
I am using Google Chrome.
AutoCAD Expert Elite
AutoCAD Civil 3D 2014 Certified Professional
C3D 2014 (SP1)
Win 7 Pro, 64-bit
View 9 Replies
View Related
Jan 15, 2013
I'm trying to use an expression for text height and everytime I enter the name of the expression I get "Invalid Input". Is there a trick to doing this?
I even changed a style that "HAD" allowed me to use an expression, to a number then tried to reenter the same expression name that was there and get "Invalid Input".
Civil 3D SP2.1
64 bit
windows 7
View 6 Replies
View Related
Jun 24, 2013
So I'm having an issue with our sheetset override. I created a override template for a 30x42 sheet size. I created a 30x42 box in paper space and put it on a defpoints layer. In the sheet properties, I have the margins zeroed out. The margins are drawn into the title block. The plot properties are set 1:1 and to extents.
When I plot a sheetset using the above override, the right side of the titleblock gets cut off, around 1/4" to 1/2" at the most. In plot preview, it does not show the edge getting cut off. However, in the plot window, where it visually shows the sheet and if you are exceeding the sheet limits or not, the red box is displayed.
However, when I manually plot the drawing without using the sheetset manager, it plots the sheet fine, but then adds 1/2" on the left side! I'm using the same plot settings as the sheetset override is. Now, when I "publish to plotter" in the sheetset manager, it adds an inch to the left side. In short, using all the same plot settings:
Manual plot = 42-1/2"x30
"Plublish to plotter" using sheetset manager = 43x30.
Using sheetset override = cuts 1/2" off right side.
View 5 Replies
View Related
Apr 12, 2012
I'm using civil 3D 2012 for 2 weeks now. When I create a query to include or exclude points in a specific point group I get an error. It doesn't allow me to build a query with decimal number but only with natural number.
Everything was fine with my old civil 3D 2011.
The problem is with civil 3D 2012? or maybe their is a magic switch somewhere to allow me to use decimal number?
View 7 Replies
View Related
Aug 20, 2013
I am receiving an invalid input message when trying to create a curve between two lines. My drawing units are set to architectural. The problem is summarized as follows:
1- In Lines/Curves menu, select curve between two lines.
2-Select first tangent
3- Select second tangent
4-Select radius option
5- Enter 8'6"
6- After entering the radius I receive an invalid input message.
7- But if I enter the radius as 102 (102 inches) the curve is created without any problem.
View 2 Replies
View Related
Mar 4, 2013
I have a baseplan I was sent for senior design project and it was previously created in an earlier version of autocad. However Im not sure which version it was created in. There are almost 3000 points and contours but I can not use these points to create a surface. I am ultimately trying to create a surface and then a profile for a road to design vertical curves throughout.
I cut out a few points and copied them into a new drawing due to the size of the actual file
View 3 Replies
View Related
Apr 10, 2013
Having problems with hang the "median raised constant slope" meet a marked point on another alignment/profile. Ive even tried using "link to marked point" also, to no avail.
My event viewer just says that "No marked point found", even though it is clearly on the other assembly with the proper name, etc.
View 1 Replies
View Related
Jun 28, 2012
I'm not a regular user of civils but have created corridors with regions and road edges in previous version to 2013 with no problems.
Now trying to create a simple corridor in 2013 and when I try to set targets I get the message "no targets found in the script".What does this mean and is there something wrong with my template file?
View 5 Replies
View Related
Jul 30, 2013
i created a profile by layout in an existing profile view and it will not show up in prospector view. I also cannot turn the profile off in the profile view because it's not in the profile list when i go to profile view properties. I have multiple profiles, profile views, alignments etc. I cannot find it anywhere in toolspace, but i can select in model space and edit.
C3D 2014
Intel Xeon 3.07 GHz
15 GB Ram
Win 7-64 bit
View 7 Replies
View Related
Dec 12, 2012
Getting a lot of message pop ups about not accessible dst file. In conjunction with this is constant slow down if the sheetset is open with the blue cursor wheel constantly thinking. If the sheet set is closed, this immediately fixes this.
Ruled out network problems as 2012 works fine. I believe this to be isloated to 2013.
View 2 Replies
View Related
Oct 29, 2013
I currently use code similar to Lee Ambrosius's 2009 AU handout that shows how to set/create custom properties. URL.... search for the header 'Adding Sheet Set and Sheet Properties'.
I have now accumulated numerous unused custom properties in my sheet set. I haven't been able to find a way to delete these additional custom properties.
Because I use multiple subsets with multiple sheets for printing, I would rather not have to go through all the sheets, store all the custom properties I need, destroy all the existing custom properties, and then re-create just the ones I need. how to delete individual custom properties.
View 2 Replies
View Related
Oct 2, 2012
I got this error opening a .dwg in C3D 2012.
Win 7 Enterprise SP1 64 bit
Intel i7 3770 @ 3.40 GHz
16 GB RAM
Civil 3D 2012 SP2
View 5 Replies
View Related
Nov 6, 2013
I have a drawing which contains 17 layouts in paperspace. When I go to plot all drawings using the sheetset manager its only plots out what is in paperspace. I.e the titleblock and nothing in the viewports, i.e model space.
View 2 Replies
View Related
Jun 6, 2012
i made a survey, about 2000 points with my TSC3R6. I exported my CSV file to a PNEZD file with comma seperated. When i try ti import the file (CSV then i made a .txt), C3D tells me "no point file format match found". Then I opened the txt file, searched for any error that would not let me import my points. The only thing i have found would be the description of my points that sometimes had a space between 2 words (ex: bt balast and ht balast) so i changed it to bt-balast and ht-balast. i looked further and didnt found anything else. heres a sample of my txt file:
11251,5038721.804,370118.600,52.877,69
11252,5038722.437,370118.327,52.980,82
11253,5038725.381,370117.058,54.235,81
11254,5038725.967,370117.395,54.325,bt-balast
11255,5038727.637,370116.899,54.860,ht-balast
11256,5038728.983,370116.602,54.857,balast
11257,5038730.043,370116.150,54.839,ht-balast
11258,5038731.524,370115.635,54.345,bt-balast
11259,5038731.763,370115.674,54.308,81
11260,5038733.529,370114.961,53.606,82
11261,5038734.460,370114.525,53.505,350
Now i have to draw something but i cant even find why importing points fails in C3D.
some usefull informations maybe:
windows 7 32bits SP1
autocad civil 3d 2013 (not yet activated, next week)
View 4 Replies
View Related
Jan 20, 2012
I have made all my sheets through the Plan Production wizards. When I go to sheet set manager, and select publish to pdf, i get an error saying the following:
ERROR: Layout not found..By using one tab per drawing, seems to publish ok. But we want multiple tabs per drawing, so not really any use to us.
View 2 Replies
View Related
Feb 8, 2011
I'm having a problem opening AutoCad Civil 3D 2010.
When I click the shortcut Windows starts configuration and then I get the following error message:
Error 1308.Source file not found;C:autodeskAutoCAD Civil 3D 2010
x86C3DProgram Files
ootCommon Files FolderAutodesk
sharedAdLM|R1en-UShelpBRWstylecommons.css.old.
Verify that the files exists and that you can access it. Needless to say AutoCad wont open all I get is Retry or Cancel, selecting.
Retry just gets the same error so when I Cancel I then get "Are you sure you want to Cancel" which I select and then I get the message Fatal Error during installation.
This is a downloaded install from Autodesk and I dont have discs available.
DWG TruView,Autodesk Vault 2010 and Autodesk Design all installed OK.
System detail's; OS is 64 bit Windows Home 7 Ver 6.1.7600 with IE8
CPU AMD Athlon 11 P320 Dual Core, 4 gig RAM,500GB HDD running on a new Toshiba Laptop.
I've looked around at various forum's without success.A couple of sites offer what they call a fix but it turns out to be registry scanners.
View 9 Replies
View Related
Oct 31, 2013
I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
View 1 Replies
View Related
Jan 17, 2013
When trying to make an existing features corridor when I select Target to set the existing surface I get an error
"No target found in the scripts."
I have attached a word file with the error as it appears on the screen.
View 5 Replies
View Related
May 4, 2008
I just opened my corridor drawing for the first time in 2009 and was greeted by this error:
Macro file not found at original path specified in subassembly. Updated macro file location to path defined by AECCCONTENT_DIR environment variable.
I'm not familiar with the maco file and the only post I found relating to this said the AECCCONTENT_DIR environment variable was abandoned in 2007.
View 3 Replies
View Related
Jul 9, 2013
When I run my corridor I get an error message that says "Failed Target Not Found" it is for the subassembly provided by WisDOT called UrbMedian.
View 4 Replies
View Related
Feb 28, 2013
I am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
View 6 Replies
View Related
Jul 23, 2012
We have our pipe networks set up in our template. But in actual use, we don't use them in every project. Even in a project where we're using them, they will be d-ref'd around, so I don't need the actual network set up in each drawing.
I was deleting my unused, empty pipe networks from a drawing (to reduce file size and to avoid getting the "8 Objects not selected" dialogue when using quick select.)
I deleted 3 or 4 networks, then on the next one I got this message:
C3D was apparantly not content with merely informing me once of this interesting fact. No, the message was obviously considered so important that it had to be repeated. Many many times, for emphasis. So many times, that after I'd keept my finger on the Escape key for a minute or two, the program still felt that I needed to see this important dialogue box.
I used Task Manager to get out of the program.
View 6 Replies
View Related
Aug 29, 2013
i have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before
View 1 Replies
View Related
Jul 28, 2011
I am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
View 1 Replies
View Related
Jun 14, 2012
I have a single lic. copy of AutoCAD 2012 LT on a single PC tied to a network server. Our server crashed and needed to be replaced. When they replaced the server, they gave it a new name so I had to reset all the file paths to the redirected folders for my PC. Now I keep getting an error: cannot create temporary file (then shows the file path to the old server).
I have reset all the file location in the files section of the options box, so I do not understand where AutoCAD is still seeing the old server. Is there somewhere else in the software that I need to change the file paths?
View 6 Replies
View Related
Feb 11, 2012
I have a .dwg file that I believe is corrupt, because when I try to open it in Autocad it says that it is invalid. Is there any way to recover this file?
View 9 Replies
View Related
Mar 16, 2012
I have a problem in that a customer drawing, actually several cutomer drawings are not closed polylines. tHEY ARE REASONABLY SIMPLE PROFILES THAT i NEED TO CUT OUT ON A CNC ROUTER. mY PROBLEM BEING THAT AS THEY ARE NOT CLOSED the router software will not recognise them properly. Is there anyway to find out where exactly on the profile the gap is with zooming right in and panning around?
View 7 Replies
View Related
Sep 1, 2009
Size of Drawing file is 4.33 mb. But Can not Open. A message appears " Drawing File Invalid"
Can I Retrieve the data.? No backup file is available in my system. I have tried with recovery tool but unable to get original data
for Any other option .
View 9 Replies
View Related
Oct 1, 2013
Coworker opened a drawing that he created yesterday. Upon opening he received the following error - "Attempting to end an invalid transaction. Id: 2008125432". He hit OK and the program resumed. It did not crash. There is no red plus in the menu bar.
Inventor 2013 SP2 update 1
Windows 7 64x SP1, 12GB RAM
NVIDIA Quadro FX 2000, driver 8.17.12.7642 (12/10/2011)
View 3 Replies
View Related
