i created a profile by layout in an existing profile view and it will not show up in prospector view. I also cannot turn the profile off in the profile view because it's not in the profile list when i go to profile view properties. I have multiple profiles, profile views, alignments etc. I cannot find it anywhere in toolspace, but i can select in model space and edit.
C3D 2014
Intel Xeon 3.07 GHz
15 GB Ram
Win 7-64 bit
I have a drawing that contains an alignment and 2 profiles (existing and proposed). Call this File A.
I created data shortcuts for these 3 objects and reference them in many drawings.
Last week File A was having some problems, it was inexplicably large and seemed to have some corruption I couldn't fix. So I created a new drawing, call it File B, and promoted the alignment and profiles into it.
I used Data Shortcut Editor to point the data shortcuts to File B. In drawings that already referenced these objects they look like the they are coming through just fine.
The problem is that I can't see the profiles listed in the Data Shortcuts section of prospector. The shortcuts folder selected is correct, the xml file is there, it points to File B. The alignment is listed and I can create that reference in a new drawing. I also can't find anything wrong with File B.
if it is possible to add a new custom tab to the Toolspace within Civil 3D.
View 2 Replies View RelatedEvery Time I open C3D I have to open my drawings.
In addition I have always an empty and irritating empty "drawing1" ....
I created a miscellaneous alignment and everything came out exactly how I wanted it to show. But I do not see this alignment in my prospector tab. I see the other centerline alignments, but when I click on Miscellaneous Alignments I do not see my alignment. It does not even have a plus box to expand. I have saved my drawing a couple times and still nothing.
I even changed it from miscellaneous to offset just to see if that had any relation to the issue, but it still does not come up in the prospector tab.
I encounter problems to organize my work. I don't understand some actual C3D behaviors. Every time I open C3D I have :
- An empty drawing1 I always have to delete .... ???????????
- Automatic last survey working folder open. Ok, it is well.
- All the drawing templates I need, Ok . it is well.
I have to open manually my drawing / drawings. In case I have to open more than 1 file (and they have to be placed at the same folder....), C3D open all of them (regardless of whether it be neccesary....) . So I have to wait and see how flies fly ..It seems that Vault can be a solution. Basic Vault can't be used inside prospector (This is what C3D says...)
Imagine I'm working with 3 or 4 projects. Every time I have to work with one of them, have I to do a stupid work (open and set folders) that can be produce errors and problems ? I have to create a VBA dialog to make this work.....
I was wondering what is the difference between importing points under the Prospector tab versus importing points under the Suvey tab? And how either of the two methods relate to using Data Shortcut?
I would like to create a survey topo drawing that contains points and surface information which other Design drawings that are attached to the Data Shortcut project can access but not be able to make any changes to the original points and existing surface information.
I have an existing drawing that I have picked cogo points for survey layout about 3 weeks ago. Now when I open the drawing the points show up on the screen, but they are not in the prospector. Where did they go? What do I need to do to get them back in the prospector?
View 4 Replies View RelatedWhy the sample lines don’t appear on the prospector?
I’m wondering why the sample lines don’t appear on the prospector like other components such that we can have an access to delete them, for example.
How can I get a list for all the sample lines?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
We have a template that opens with extra Prospector items. For example, we have point groups Design Points, Design Points.1, Design Points.2, etc etc. See attached image. We have gone into the template and deleted all of the duplicate items.
When we use the template, it creates all of these duplicate things again and the template has the items again.how to permanently remove these items?
After working in civil 3d for a while they will disappear. have to close toolspace and open again. have sp1 installed already.
See picture for detail. as you can see only toolbox is left. and when i select toolbox from general menu. the whole toolspace will shut down.
I dragged a surface style from another drawing into the drawing I am having issues with. The Issue is that after inserting the style the Prospector and Settings are not expandable. The Prospector check box is grayed out and there are dots in front of the Settings tab.
Basically I can't expand either the Prospector or the Setting to edit surfaces, alignments, styles, etc.
Some times I note the lack of a top warning-icon placed on top of prospector folder.
The idea is, for example, that in case I had a corridor out of date I dont see this "situation" until I navigate up to the corridors/corridor item, so I can forget easily the rebuild need. The posibility to see this icon near the name of my drawing should be very useful.
Civil 3D (2013)
When a file has many surfaces, gradings and sites manually delete them is slow ¿is there a method to select multiple sites, surfaces and gradings on prospector and delete them all at once and not one by one?
View 1 Replies View RelatedI'm unable to find a profile for my Canon 5D Mark III within the PS CS6 lens correction filter. In fact, Canon isn't even available as a camera make option within the Search Criteria box, nor are any canon lenses. When I click the Search Online button, the prompt reads "No online profiles found".
I have no problem within Light room 4 (the Mark III and lenses are recognized)-- however, I'd really like to be able to use the new Adaptive Wide Angle Lens filter within CS6, which needs the camera's EXIF data to function correctly. I'm using a new i Mac OS X.7
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedIm creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies View RelatedI have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies View RelatedI am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.
So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.
We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
where to change the text height and color for the lower band where the stations are. Also, how do I get the exist grade and proposed grade to show at the specified stations vertically like LDD used to do it.
Second, how do i mask the pipe in the manholes on the profile. Right now i can see the pipe inside the manhole. I clicked "enable masking" under the structure properties but no luck.
Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
I have 3 profiles that I've superimposed together. Then I created sheets using the superimposed profile. I used the wizard and had Civil 3d do it for me (2012). Now I have to add a 4th profile to the mix and get it to show in my profile views that have already been cut. The data is shortcut into the drawing with my cut profiles views. How do I get it to be in the cut profile views without re cutting everything?
View 1 Replies View RelatedA tabular data sheet for profiles could be very interesting.
Civil 3D (2013)