I'm not a regular user of civils but have created corridors with regions and road edges in previous version to 2013 with no problems.
Now trying to create a simple corridor in 2013 and when I try to set targets I get the message "no targets found in the script".What does this mean and is there something wrong with my template file?
Is there a way to make the parcel ROW as my target with for my corridor?
View 2 Replies View Relatedi've got a pretty long corridor and usually when i open the drawing i have to reattach some of the targets alignments and profiles to get the sections looking correct. pita. is there a way to lock the targets or do i just have to be diligent in assigning the targets?
View 3 Replies View RelatedI am trying to get an assembly to work but having no luck. I have a 4' side walk with a (boulevard that varies in slope and distance from the back of curb) on the right side. (The sidewalk is existing and will be put back in the same place) I have an alignment and profile for the inside edge of sidewalk. (The inside edge of the sidewalk is the point I want to target). I have tried different targets and assemblies but get get anything to do what I need. Any way on assemblies and getting them to work in the sections?
View 9 Replies View RelatedI can make a small subassembly that can vary it's deltaX and deltaY based on a 3d polyline (or alignment / profile) in the drawing. However the subassembly does not get put in with default perameters outside of the areas where the targets exist.
I have been trying to come up with a decision tree to tell the subasembly to use default values where there are no targets to use, but I have not been able to find the correct syntax that works for those true/false decisions. My VB language knowledge is clearly lacking.....
Looking for small .pkt file to show how it is done?
Here's my assembly :
and
when I tried to assign the Median Width in my corridor to a polyline representing media width,
I got this overlap in my Section view :
how can I maintain Objects in this cause "Lanes" attached to median no matter width change ?
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
With the default cross slope 2% in place and no profile targets, section views with subject sub assembly come up at 0%
there's some polyline width targets but no verticals...
Having problems with hang the "median raised constant slope" meet a marked point on another alignment/profile. Ive even tried using "link to marked point" also, to no avail.
My event viewer just says that "No marked point found", even though it is clearly on the other assembly with the proper name, etc.
i created a profile by layout in an existing profile view and it will not show up in prospector view. I also cannot turn the profile off in the profile view because it's not in the profile list when i go to profile view properties. I have multiple profiles, profile views, alignments etc. I cannot find it anywhere in toolspace, but i can select in model space and edit.
C3D 2014
Intel Xeon 3.07 GHz
15 GB Ram
Win 7-64 bit
We have a project that uses a sheetset for drawing management and plotting.
On one pc the sheetset opens up fine when a drawing is opened.
On a second pc we get a message saying that the .dst can't be found.
If we then try to open the .dst via the open command on the sheetset manager we receive a dialog telling us the sheetset is invalid.
Both PC's are identical with the same network access rights etc. and both running C3D 2006.
I got this error opening a .dwg in C3D 2012.
Win 7 Enterprise SP1 64 bit
Intel i7 3770 @ 3.40 GHz
16 GB RAM
Civil 3D 2012 SP2
i made a survey, about 2000 points with my TSC3R6. I exported my CSV file to a PNEZD file with comma seperated. When i try ti import the file (CSV then i made a .txt), C3D tells me "no point file format match found". Then I opened the txt file, searched for any error that would not let me import my points. The only thing i have found would be the description of my points that sometimes had a space between 2 words (ex: bt balast and ht balast) so i changed it to bt-balast and ht-balast. i looked further and didnt found anything else. heres a sample of my txt file:
11251,5038721.804,370118.600,52.877,69
11252,5038722.437,370118.327,52.980,82
11253,5038725.381,370117.058,54.235,81
11254,5038725.967,370117.395,54.325,bt-balast
11255,5038727.637,370116.899,54.860,ht-balast
11256,5038728.983,370116.602,54.857,balast
11257,5038730.043,370116.150,54.839,ht-balast
11258,5038731.524,370115.635,54.345,bt-balast
11259,5038731.763,370115.674,54.308,81
11260,5038733.529,370114.961,53.606,82
11261,5038734.460,370114.525,53.505,350
Now i have to draw something but i cant even find why importing points fails in C3D.
some usefull informations maybe:
windows 7 32bits SP1
autocad civil 3d 2013 (not yet activated, next week)
I have made all my sheets through the Plan Production wizards. When I go to sheet set manager, and select publish to pdf, i get an error saying the following:
ERROR: Layout not found..By using one tab per drawing, seems to publish ok. But we want multiple tabs per drawing, so not really any use to us.
I'm having a problem opening AutoCad Civil 3D 2010.
When I click the shortcut Windows starts configuration and then I get the following error message:
Error 1308.Source file not found;C:autodeskAutoCAD Civil 3D 2010
x86C3DProgram Files
ootCommon Files FolderAutodesk
sharedAdLM|R1en-UShelpBRWstylecommons.css.old.
Verify that the files exists and that you can access it. Needless to say AutoCad wont open all I get is Retry or Cancel, selecting.
Retry just gets the same error so when I Cancel I then get "Are you sure you want to Cancel" which I select and then I get the message Fatal Error during installation.
This is a downloaded install from Autodesk and I dont have discs available.
DWG TruView,Autodesk Vault 2010 and Autodesk Design all installed OK.
System detail's; OS is 64 bit Windows Home 7 Ver 6.1.7600 with IE8
CPU AMD Athlon 11 P320 Dual Core, 4 gig RAM,500GB HDD running on a new Toshiba Laptop.
I've looked around at various forum's without success.A couple of sites offer what they call a fix but it turns out to be registry scanners.
When trying to make an existing features corridor when I select Target to set the existing surface I get an error
"No target found in the scripts."
I have attached a word file with the error as it appears on the screen.
I just opened my corridor drawing for the first time in 2009 and was greeted by this error:
Macro file not found at original path specified in subassembly. Updated macro file location to path defined by AECCCONTENT_DIR environment variable.
I'm not familiar with the maco file and the only post I found relating to this said the AECCCONTENT_DIR environment variable was abandoned in 2007.
When I run my corridor I get an error message that says "Failed Target Not Found" it is for the subassembly provided by WisDOT called UrbMedian.
View 4 Replies View RelatedI am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
View 6 Replies View RelatedWe have our pipe networks set up in our template. But in actual use, we don't use them in every project. Even in a project where we're using them, they will be d-ref'd around, so I don't need the actual network set up in each drawing.
I was deleting my unused, empty pipe networks from a drawing (to reduce file size and to avoid getting the "8 Objects not selected" dialogue when using quick select.)
I deleted 3 or 4 networks, then on the next one I got this message:
C3D was apparantly not content with merely informing me once of this interesting fact. No, the message was obviously considered so important that it had to be repeated. Many many times, for emphasis. So many times, that after I'd keept my finger on the Escape key for a minute or two, the program still felt that I needed to see this important dialogue box.
I used Task Manager to get out of the program.
I just finished activating CS9.0 and have a few questions. I have never used photoshop before, and would like to start producing targets for smallbore rifle competitions. Problem is the targets have to be set up a certain way and I can't for the life of me figure out how to set circle diameters.
For instance. Most rifle scopes have 1/4 MOA incrememts in their adjustments 1 click at 100 yards adjusts the point of impact .250" so if your rifle is shooting 1" low and 1/2" right at 100 yards you would click your scope 4 clicks up, and 2 clicks left to get the bullet impact centered with your crosshairs.
I want to make an 8.5"x11" printable target like this
bullseye - .250" - Black
9 ring - .500" - white
8 ring - .750" - Black
so on and so forth till the 5 ring.
over that I would like to overlay a grid with .250" squares in it
at the bottom I would like a rectangle with text spaces labeled for - date, time, temperature, wind speed, wind direction, Rifle make/model. ammunition make/bullet weight group size, and a few other things.
I am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
I moved the folder where all the brushes and stuff into the overall gimp folder. Originally the folder with the brushes and stuff was in Documents Settings, however now after I moved it. My brushes don't work. How do I make it so that gimp targets the new location of the folder?
View 2 Replies View RelatedI put in building section targets and detail targets. When i opened it the next day some were missing from the drawing but the building section and detail views still exist. Where did the targets go/
View 1 Replies View RelatedI have an object with about 10 morph targets and I've seen some issues with some shapes, which will need a few more edge loops around the mouth. Adding an edgeloop or any other topology edition to any of the targets or the original breaks the morpher animation.Is there a way to do this? Or to propagate the topology changes to all the morph targets?
View 2 Replies View RelatedConsider this simple document with 2 layers and an adjustment layer:
Note the eyedropper targets. They read as expected:
Now, observe what happens when I click my adjustment layer (this is a new Levels adjustment that has NOT YET BEEN TOUCHED - so there should be NO CHANGE)
It doesn't matter whether the adjustment layer or its layer mask are selected, the results are the same. Here are my eyedropper settings:
Proof Colors is off. I can't think of any other setting to play with. This looks like a pretty huge bug to me, and it's not something I remember from earlier versions.
This morning I had an update and now when I use my direct select tool, all these little dots/targets show up, how do I turn that feature off?
View 5 Replies View RelatedJust loaded 2012. When I go to plot, the plot style table drop down can't find any ctb's. The "plot style table search path" in options > files, is set to the right folder. I've tried convert, convertstyles, ptstylepolicy and nothing works, Why can't Acad find the path with the ctb's.
View 9 Replies View RelatedInstalled AutoCAD Map 3D Enterprise 2012 x64_ru on Windows 2008R2 Enterprise x64_ru. After published Infrastructure Map Server in browser display message "The specified object was not found".
But when using AutoCAD Map 3D Enterprise 2012 x32_en published is correct and you can see our schem.
Upgraded to Window 7 64 bit and autocad 2014 and now I can't make pdf's from my dwgs.The dwg to pdf pc3 file is in the same directory as the other plot files and my search path points to that directory.When I try to conver to pdf, I'm asked to select the file from the list (see attached)
View 9 Replies View Relatedi've updated my ACAD 2012 LT to 2013 LT.
But I get errors from time to time with.:
Shape catalog file
"........appDataRoamingAutodeskAutoCAD LT 2013EnglishR18enusupportshapes.atc" is not found"
also fields.atc....
These atc files are not imported at update to my library.
I've tried re-installing without result.
The files are still in my old program files.
I'm using replace on a sub assembly but want to write a parameter change to all the parts in the sub assembly as & when they appear.
An error occurs when I try to write a parameter to a part which isn't in the sub assembly - makes sense but how do work around this?
First try was this:
If Component.IsActive("SS_12.5mm Insln:1") = True Then Parameter("SS_12.5mm Insln:1", "Material") = Insulation
but "SS_12.5mm Insln:1" isn't here (by design) - I want a Component.Exists type comand - possible?