Photoshop :: Creating Targets (Cs9.0)
Aug 18, 2005
I just finished activating CS9.0 and have a few questions. I have never used photoshop before, and would like to start producing targets for smallbore rifle competitions. Problem is the targets have to be set up a certain way and I can't for the life of me figure out how to set circle diameters.
For instance. Most rifle scopes have 1/4 MOA incrememts in their adjustments 1 click at 100 yards adjusts the point of impact .250" so if your rifle is shooting 1" low and 1/2" right at 100 yards you would click your scope 4 clicks up, and 2 clicks left to get the bullet impact centered with your crosshairs.
I want to make an 8.5"x11" printable target like this
bullseye - .250" - Black
9 ring - .500" - white
8 ring - .750" - Black
so on and so forth till the 5 ring.
over that I would like to overlay a grid with .250" squares in it
at the bottom I would like a rectangle with text spaces labeled for - date, time, temperature, wind speed, wind direction, Rifle make/model. ammunition make/bullet weight group size, and a few other things.
View 6 Replies
ADVERTISEMENT
Apr 5, 2013
Consider this simple document with 2 layers and an adjustment layer:
Note the eyedropper targets. They read as expected:
Now, observe what happens when I click my adjustment layer (this is a new Levels adjustment that has NOT YET BEEN TOUCHED - so there should be NO CHANGE)
It doesn't matter whether the adjustment layer or its layer mask are selected, the results are the same. Here are my eyedropper settings:
Proof Colors is off. I can't think of any other setting to play with. This looks like a pretty huge bug to me, and it's not something I remember from earlier versions.
View 15 Replies
View Related
Jul 20, 2013
I moved the folder where all the brushes and stuff into the overall gimp folder. Originally the folder with the brushes and stuff was in Documents Settings, however now after I moved it. My brushes don't work. How do I make it so that gimp targets the new location of the folder?
View 2 Replies
View Related
Jan 18, 2012
I put in building section targets and detail targets. When i opened it the next day some were missing from the drawing but the building section and detail views still exist. Where did the targets go/
View 1 Replies
View Related
Aug 7, 2011
Is there a way to make the parcel ROW as my target with for my corridor?
View 2 Replies
View Related
Jun 28, 2012
I'm not a regular user of civils but have created corridors with regions and road edges in previous version to 2013 with no problems.
Now trying to create a simple corridor in 2013 and when I try to set targets I get the message "no targets found in the script".What does this mean and is there something wrong with my template file?
View 5 Replies
View Related
Feb 16, 2011
I have an object with about 10 morph targets and I've seen some issues with some shapes, which will need a few more edge loops around the mouth. Adding an edgeloop or any other topology edition to any of the targets or the original breaks the morpher animation.Is there a way to do this? Or to propagate the topology changes to all the morph targets?
View 2 Replies
View Related
Nov 1, 2012
i've got a pretty long corridor and usually when i open the drawing i have to reattach some of the targets alignments and profiles to get the sections looking correct. pita. is there a way to lock the targets or do i just have to be diligent in assigning the targets?
View 3 Replies
View Related
Jun 15, 2012
I am trying to get an assembly to work but having no luck. I have a 4' side walk with a (boulevard that varies in slope and distance from the back of curb) on the right side. (The sidewalk is existing and will be put back in the same place) I have an alignment and profile for the inside edge of sidewalk. (The inside edge of the sidewalk is the point I want to target). I have tried different targets and assemblies but get get anything to do what I need. Any way on assemblies and getting them to work in the sections?
View 9 Replies
View Related
Oct 4, 2012
I can make a small subassembly that can vary it's deltaX and deltaY based on a 3d polyline (or alignment / profile) in the drawing. However the subassembly does not get put in with default perameters outside of the areas where the targets exist.
I have been trying to come up with a decision tree to tell the subasembly to use default values where there are no targets to use, but I have not been able to find the correct syntax that works for those true/false decisions. My VB language knowledge is clearly lacking.....
Looking for small .pkt file to show how it is done?
View 3 Replies
View Related
Jan 16, 2014
This morning I had an update and now when I use my direct select tool, all these little dots/targets show up, how do I turn that feature off?
View 5 Replies
View Related
Jul 9, 2012
Here's my assembly :
and
when I tried to assign the Median Width in my corridor to a polyline representing media width,
I got this overlap in my Section view :
how can I maintain Objects in this cause "Lanes" attached to median no matter width change ?
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 1 Replies
View Related
Nov 2, 2012
With the default cross slope 2% in place and no profile targets, section views with subject sub assembly come up at 0%
there's some polyline width targets but no verticals...
View 6 Replies
View Related
Mar 20, 2013
I am trying to create a GIF using CS3. I have read the discussions on Adobe but I get to a stage in the instructions and it is not working for me. I have 6 jpeg photos, and i bring them all into one. All photos are named different. After reading the forums, the next step is FILE>SAVEAS. Next, you select COMPUSERVE.gif. Once I select that, I have no idea where to go.
View 5 Replies
View Related
Nov 5, 2012
I'm trying to create a DVD (to view on a DVD player to show on TV) from a photo story using the Timeline in PS6. the correct way to burn a DVD?
View 1 Replies
View Related
Jun 16, 2009
In PS CS4.I am trying to make a .pdf to send to a printer. I do not know if the printer as CS4. Eventually I will ask, but..I made a pdf in Photoshop, basically using the High Quality print settings.Normally, when I open a pdf in Photoshop that was made in Photoshop I am able to see the layers, adjustment layers..etc..I tried opening this .pdf in Photoshop 7.0 & it had asked me to rasterize it with that dialog screen, although I did have Preserve Photoshop Editing Capabilities checked.
View 4 Replies
View Related
Jan 21, 2004
How do I create an arc in Photoshop 5.5 or 6.0?? I want to connect two staright lines with an arc, but I can only figure out how to create an ellipse or a circle.
View 6 Replies
View Related
Jul 15, 2007
know of a technique or a filter to apply that will create 8-bit looking art out of an already existing image?
i feel like i've done this before with a tiling filter, but i'm not seeing it on CS3.
am i gonna have to trace over the image on a layer with a square brush? seems like there's gotta be an easier way. a plug-in someone knows about perhaps, or a series of steps maybe?
View 2 Replies
View Related
Feb 19, 2013
I want to create a droplet in CS6 that I can drag lots of images to and simply have it resize those images and save them to a new folder. I create an action to change the image size and save the images to a folder as a .jpg. I then create a droplet based on this action. I tried several times to drag images onto the droplet, though as it goes through the images it prompts me with questions as it is saving the images, and it never actually saves the optimized images to a folder.
View 1 Replies
View Related
Sep 4, 2013
I created a new file, set my sizes and all that, 8bit and began...I literally am using the line tool to make a straight line vertically, I then want to use my brush at 2pixels and 100 hardness to "stroke path", I set my brush then select path selection tool and right click on the line, but "stroke path" is grayed out? I really don't understand. I am following these directions from a website on how to create postcard back.
this is what i was following:
Create a new document with the same exact specifications used earlier for the front. Grab the Line tool and draw a straight vertical line shorter than the postcard’s height, and then place it slightly off center. Set your brush to a size of one or two pixels with a hardness of 100 percent. With the Path Selection tool, right click on the line and choose “Stroke Path.”
View 11 Replies
View Related
Aug 16, 2012
I just installed a fresh CS5, we are using some scripting that's installed on 5 other CS5 machines and this never happened before - when files are being saved (using 'save as', overwriting the original) this particular setup is saving xml files too!? See below
View 2 Replies
View Related
Sep 26, 2012
I'm creating a criminal line out background . I'm using the line tool to create the lines. I have renamed it in the path tool created a clipping mask but when I flatten the image once finished the lines disappear.
I have also tried creating a new layer naming it putting it between my copied layer and background but once again when flattening the image it doesn't keep the lines. I'm using CS4 .
View 10 Replies
View Related
Oct 17, 2012
I have been using photoshop for years. recently everytime i click create new file or open existing one, when i do, nothing opens. I can see the layers but i cannot see the workspace. Its like its invisible. How do i fix this? I am woking on a mac book pro and bought cs5.1 last spring.
View 1 Replies
View Related
Aug 8, 2013
I'm trying to create some templates, as I'm really loving the smart objects features. It really plays along with the style of graphics I make, which is basically custom objects.
View 3 Replies
View Related
Jul 11, 2012
I am running Windows 7. I created an Action in Photoshop CS6 that includes placing a rectangle and a logo on the bottom right hand corner of my images and then centered in the middle of the rectangle is text of the event (Event name, Location, Date). After creating everything, I flatten the image, resize it down to a size reasonable for the web, then I save the image to a folder, close the document and click on the STOP button in the Actions panel.
Afterwards, I go into File>Automate>Batch and choose the Action that I just created. In running the action, I notice that the text that I placed into the rectangle on my document is now scaling down to a considerably much smaller size than what I had it set to.
View 1 Replies
View Related
Mar 18, 2012
How to create a slideshow in PS 12.0?
View 4 Replies
View Related
Mar 22, 2012
So I have been trying to create a gif from a video I went to File > Import > Videos to Layers but all the layers always end up white instead of showing parts of the video like in screenshot below:
It showed the video and played it the first time I tried it but I'm pretty sure I accidentally clicked on something that won't let it show the video anymore and I can't figure out how to undo do it.
View 1 Replies
View Related
Oct 31, 2002
I'm messing around with a project for fun and I'm wondering if any of you guys know a great way to make a realistic bar code/UPC image with the thick and thin, black, vertical lines aligned up horizontally? I tried this approach into creating one, but it just wasn't working for me. Here's the method I tried to use (in case some of you have a similar method).
1) Layer 1, start with a white background (hope I didn't lose anyone with this step ;P).
2) I added a Noise filter with the settings of Monochromatic and Gaussian Blur at 400% on Layer 1.
3) Then, I applied the Motion Blur filter 90 Degrees and had the distance set to 999 pixels.
4) Then, I tried to do some adjusting with Curves to brighten it up because before this point, it was just a black and gray image.
And this is where I came close, but no go. I haven't been able to turn the gray into a solid white and I tried using the Magic Wand tool to just select the gray areas and fill them in with white, but that didn't help cause it was blurry and it wasn't all one shade of gray. Any help or if you know another method is doing this will be helpful. Yah, I could just use the line tool and just create thick and thin vertical lines all the way across, but just wondering if anyone else had a better method.
View 7 Replies
View Related
Jul 22, 2005
could someone explain how to create a command key for an action?
I have created custom actions and would like to assign them to different keys such as F11...
View 3 Replies
View Related
Mar 17, 2005
I'm trying to create a few sigs but being a photoshop rookie its gets tough trying to match the vets. I've done some tutorials on creating cool text effects and I've made some images I like. How do I get the two together? When I tried I lost the effect on the text.
View 8 Replies
View Related
Sep 18, 2006
You see were it says.. welcome to Mozilla in the image attached? How would I go by creating that?
View 5 Replies
View Related
