know of a technique or a filter to apply that will create 8-bit looking art out of an already existing image?
i feel like i've done this before with a tiling filter, but i'm not seeing it on CS3.
am i gonna have to trace over the image on a layer with a square brush? seems like there's gotta be an easier way. a plug-in someone knows about perhaps, or a series of steps maybe?
I am trying to create a GIF using CS3. I have read the discussions on Adobe but I get to a stage in the instructions and it is not working for me. I have 6 jpeg photos, and i bring them all into one. All photos are named different. After reading the forums, the next step is FILE>SAVEAS. Next, you select COMPUSERVE.gif. Once I select that, I have no idea where to go.
View 5 Replies View RelatedI'm trying to create a DVD (to view on a DVD player to show on TV) from a photo story using the Timeline in PS6. the correct way to burn a DVD?
View 1 Replies View RelatedIn PS CS4.I am trying to make a .pdf to send to a printer. I do not know if the printer as CS4. Eventually I will ask, but..I made a pdf in Photoshop, basically using the High Quality print settings.Normally, when I open a pdf in Photoshop that was made in Photoshop I am able to see the layers, adjustment layers..etc..I tried opening this .pdf in Photoshop 7.0 & it had asked me to rasterize it with that dialog screen, although I did have Preserve Photoshop Editing Capabilities checked.
View 4 Replies View RelatedHow do I create an arc in Photoshop 5.5 or 6.0?? I want to connect two staright lines with an arc, but I can only figure out how to create an ellipse or a circle.
View 6 Replies View RelatedI want to create a droplet in CS6 that I can drag lots of images to and simply have it resize those images and save them to a new folder. I create an action to change the image size and save the images to a folder as a .jpg. I then create a droplet based on this action. I tried several times to drag images onto the droplet, though as it goes through the images it prompts me with questions as it is saving the images, and it never actually saves the optimized images to a folder.
View 1 Replies View RelatedI created a new file, set my sizes and all that, 8bit and began...I literally am using the line tool to make a straight line vertically, I then want to use my brush at 2pixels and 100 hardness to "stroke path", I set my brush then select path selection tool and right click on the line, but "stroke path" is grayed out? I really don't understand. I am following these directions from a website on how to create postcard back.
this is what i was following:
Create a new document with the same exact specifications used earlier for the front. Grab the Line tool and draw a straight vertical line shorter than the postcard’s height, and then place it slightly off center. Set your brush to a size of one or two pixels with a hardness of 100 percent. With the Path Selection tool, right click on the line and choose “Stroke Path.”
I just installed a fresh CS5, we are using some scripting that's installed on 5 other CS5 machines and this never happened before - when files are being saved (using 'save as', overwriting the original) this particular setup is saving xml files too!? See below
View 2 Replies View RelatedI'm creating a criminal line out background . I'm using the line tool to create the lines. I have renamed it in the path tool created a clipping mask but when I flatten the image once finished the lines disappear.
I have also tried creating a new layer naming it putting it between my copied layer and background but once again when flattening the image it doesn't keep the lines. I'm using CS4 .
I have been using photoshop for years. recently everytime i click create new file or open existing one, when i do, nothing opens. I can see the layers but i cannot see the workspace. Its like its invisible. How do i fix this? I am woking on a mac book pro and bought cs5.1 last spring.
View 1 Replies View RelatedI'm trying to create some templates, as I'm really loving the smart objects features. It really plays along with the style of graphics I make, which is basically custom objects.
View 3 Replies View RelatedI am running Windows 7. I created an Action in Photoshop CS6 that includes placing a rectangle and a logo on the bottom right hand corner of my images and then centered in the middle of the rectangle is text of the event (Event name, Location, Date). After creating everything, I flatten the image, resize it down to a size reasonable for the web, then I save the image to a folder, close the document and click on the STOP button in the Actions panel.
Afterwards, I go into File>Automate>Batch and choose the Action that I just created. In running the action, I notice that the text that I placed into the rectangle on my document is now scaling down to a considerably much smaller size than what I had it set to.
How to create a slideshow in PS 12.0?
View 4 Replies View RelatedSo I have been trying to create a gif from a video I went to File > Import > Videos to Layers but all the layers always end up white instead of showing parts of the video like in screenshot below:
It showed the video and played it the first time I tried it but I'm pretty sure I accidentally clicked on something that won't let it show the video anymore and I can't figure out how to undo do it.
I'm messing around with a project for fun and I'm wondering if any of you guys know a great way to make a realistic bar code/UPC image with the thick and thin, black, vertical lines aligned up horizontally? I tried this approach into creating one, but it just wasn't working for me. Here's the method I tried to use (in case some of you have a similar method).
1) Layer 1, start with a white background (hope I didn't lose anyone with this step ;P).
2) I added a Noise filter with the settings of Monochromatic and Gaussian Blur at 400% on Layer 1.
3) Then, I applied the Motion Blur filter 90 Degrees and had the distance set to 999 pixels.
4) Then, I tried to do some adjusting with Curves to brighten it up because before this point, it was just a black and gray image.
And this is where I came close, but no go. I haven't been able to turn the gray into a solid white and I tried using the Magic Wand tool to just select the gray areas and fill them in with white, but that didn't help cause it was blurry and it wasn't all one shade of gray. Any help or if you know another method is doing this will be helpful. Yah, I could just use the line tool and just create thick and thin vertical lines all the way across, but just wondering if anyone else had a better method.
could someone explain how to create a command key for an action?
I have created custom actions and would like to assign them to different keys such as F11...
I'm trying to create a few sigs but being a photoshop rookie its gets tough trying to match the vets. I've done some tutorials on creating cool text effects and I've made some images I like. How do I get the two together? When I tried I lost the effect on the text.
View 8 Replies View RelatedYou see were it says.. welcome to Mozilla in the image attached? How would I go by creating that?
View 5 Replies View Relatedin photoshop 7, how do you make a new pattern.
i want to have a gradient of 12px by 50 px and i want to make that into a pattern so that i can have it for later use.
what do i do to make a new pattern.
I've been asked by a friend to create a CD cover and inlay for a his band, something I haven't done before (i've only done web-design until now).
I've been reading up online about how to create them and I've been getting nowhere, fast! I read that a CD cover should be 120mm x 120mm, but this appears to be HUGE on my small monitor screen and I have to zoom out in order to see what I'm doing!
how to create desktop themes in photoshop?
I wanna start on one,
anyone have a better way of making grids in CS?
if not is there a way in Illustrator?
I want to know if I can create a mask on a photo I have, basically Iwant to remove the background but I want to put some form of mask over the some of the photo so that no of the brush stokes etc alter that part of the image..
Can this be done at all with CS3?
I am trying to do the following:
I have a bunch of huge 5.3 megapixel pix on disc. I want to create an action that:
1. opens all the pictures on the disk
2. resizes them
3. applies USM
4. then saves them to a different folder on my HD
I tried to create the above action and it goes through the steps but does not resize them. What seems to happen is that it opens the first picture and performs the command but subsequent files opened do not resize etc..
I'm using Photoshop CS 8.0
studying architecture and we tend to work on standard a1 portrait format sheets. Usually I just draw straight to pages etc but our new project is very conceptual type work and I wanted to try and incorporate some photoshop work into my pages rather than just plain drawings as usual.
how do I set up an A1 portrait format sheet in photoshop cs2? Is it just a case of finding the page measurements and starting a new document of those dimensions in centimetres? Or is there an option to this somewhere that I'm missing?
Also when it comes to printing.... I think I know of somewhere that I can take it to on a cd/usb drive and they will print it, but just in case that falls through, I've seen others split it into A3 size sheets and paste them together after... once you've created an A1 sheet is there a easy way to do this?
I'm looking to create a simple banner with just a background color and text on top. What's the best format to save in if I want to use it in email attachments? I've tried both .gif and .jpg but the text looks blurry when I view it in the email (however it looks crisp on screen in photoshop)
View 2 Replies View Relatedam trying to incorporate text into a picture I edited.
View 3 Replies View RelatedI want to make a set of icons for my website, but I'm not too sure how to go about it, using photoshop. I want to make icons that are full 16-24bit colour - like Mac icons (not same style, but those kind of nice icons).
View 4 Replies View RelatedI just finished activating CS9.0 and have a few questions. I have never used photoshop before, and would like to start producing targets for smallbore rifle competitions. Problem is the targets have to be set up a certain way and I can't for the life of me figure out how to set circle diameters.
For instance. Most rifle scopes have 1/4 MOA incrememts in their adjustments 1 click at 100 yards adjusts the point of impact .250" so if your rifle is shooting 1" low and 1/2" right at 100 yards you would click your scope 4 clicks up, and 2 clicks left to get the bullet impact centered with your crosshairs.
I want to make an 8.5"x11" printable target like this
bullseye - .250" - Black
9 ring - .500" - white
8 ring - .750" - Black
so on and so forth till the 5 ring.
over that I would like to overlay a grid with .250" squares in it
at the bottom I would like a rectangle with text spaces labeled for - date, time, temperature, wind speed, wind direction, Rifle make/model. ammunition make/bullet weight group size, and a few other things.
I'm trying to create a web layout, but I'm not sure about how big I should make it. I was also wondering how you would import the animations into the weblayout with imageready.
View 6 Replies View RelatedJust unsure of size to work from that is the correct size in web browser. Understand a little on slicing it up and optimizing it.
View 3 Replies View Related