AutoCAD Civil 3D :: How To Annotate Add Labels And Tables
Aug 1, 2013
I managed to input the values of "Point Number", "Easting", "Northing", "Point Elevation" for 8 points of my CDC project that has 4 Sampling Locations with 2 Depths in each location - see the attched file for details. I also manually added the SampleID to the "Name" of each point. Now I want to do the following 2 things via the "Annotate" menu:
1) Add Labels: Instead of Point Number, I want to use the SampleID to label each point. How can I do it?
2) Add Tables: I have some chemical results/data (in Excel .csv file) for each point. I want to attach these chemical results/data to each point. Should I create an external Database? How can I designate that external Database is for the 8 points of my CDC8pts.dwg? How can use the external Database to label the chemical results/data to each point?
I have read some tutorials:
(i) I rotated my CDC8pts.dwg several times - the current view is from the Bottom of Z-axis and the Point Numbers are in the reversed mode!! How can I set the Point Numbers in the normal mode? If the Point Numbers are replaced by the SampleID, how can I set the SampleID in the normal mode too?
(ii) I saw the "Point Groups"/All Points thing on my CDC8pts.dwg, they appeared in this dwg, after I did the inputting for the "Point Number", "Easting", "Northing", "Point Elevation". Should I do something on the "Point Group" before I do 1) and 2)?
View 3 Replies
ADVERTISEMENT
Jul 13, 2012
I seem to have lost my Add Labels Menu Button on my Annotate Ribbon. I have tried reloading my workspace but it is still gone. How to add it back on?
View 2 Replies
View Related
Jun 22, 2012
I am doing a project and I have a lot of feature lines. I will need to be able to lable these feature lines with tags and then create tables for those. My question is, is there an easy format that I can do that will lable these lines in an order I set it up? Right now it just lables all over the place. The lines are counting the curves too. For example: L1 L2 L3 C1 L5 L6 C2 L8. I can make it work, would just think there is a better way. BTW I am using Civil 3D 2011.
View 1 Replies
View Related
Oct 16, 2013
I am looking for some general feedback on where the majority of people annotate there drawings. I was in a CAD meeting discussing our new CAD standards that we will be rolling out on Jan 1, 2014. A major improvement I recommended to the plans was to place our annotations in our XREF drawings instead of placing them in model space of our sheet sets. (Our sheet sets are our drawings that have our titlblocks that we plot from ). So, I am asking where do the majority of CAD users like toad annotations to there drawings? PaperSpace, model space, xref’s, etc. and why they do it that way?
I should also state that we are transitioning from 2012 software to Civil3d 2014 software too.
View 9 Replies
View Related
Dec 27, 2013
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
View 2 Replies
View Related
May 3, 2013
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
View 9 Replies
View Related
Aug 25, 2012
I have 4 corridors on same alignments (pics1). I created materials for each corridors (pic2). Then I created multiple section view for each corridor (pic3) ( for all corridors in section view table tab, i added corridors own materials). but cumulative material volume reset to zero at each new corridors beginning. In my project, corridors cumulative material volume value should continue from the previous corridor's value. Can i connect this volume tables or can i merge corridors ?
View 6 Replies
View Related
Nov 8, 2012
I am doing a little trial and error on possibly converting a drawing from .ctb to .stb. When we start a new drawing, it will be started using named plot styles so it shouldn't be an issue. But there are times when we receive a drawing from someone else and need to convert it.
The first thing I did was convert ctb to create a conversion .stb. Then I used convert pstyles to convert the drawing to named plot styles. For the plot style table I chose the conversion .stb I just created because it needs a color mapping table.
But I don't want to use the converted .stb table, I want to use my company plot style. So when I am in layer properties manager, Plot Style is still grayed out and I can't change it.
When I type in pstylemode, the default is 0 (read only). How do I change it so it's not read only and I can use my own plot style table?
View 5 Replies
View Related
Mar 7, 2012
I'm working in Civil3D 2011. How to export the data from the surface volume tables to excel, or any other format outside of Civil3D?
Or maybe a better question: how to create a stage storage table automatically within Civil3D? The elevations table gives volumes per elevation class, but I'm trying to get cumulative volume stored below various elevations in my reservoir.
View 9 Replies
View Related
Apr 27, 2012
When i try to Add a Alignment Table for curves , and everry time i select the aligment or it's lable , it tells me that no Item Found,now what exactly i'm supposed to select ?
i use C3D 2012
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 2 Replies
View Related
Oct 14, 2012
tried to insert Excel tables into 2013 3D? It worked fine in 2012 but we just upgraded to 2013 and it no longer works. We get an error message that Excel is not supported. Is this a new feature or a bug? Also, our old drawings with the table already inserted does not plot normally. The table characters print at diffent sizes.
View 9 Replies
View Related
Dec 6, 2012
I just began messing around with linking excel and autocad (disappointed that you can't link to .xlsm but that will go on the wish list). I was wondering if there was already a post as to how to not lose your fields when you download from source. I have a table that has fields from my sheet set with drawing names etc...but everytime I click download from source it converts the field to plain text.
View 9 Replies
View Related
Dec 9, 2013
How do I save my line and curve tables after I customize them?
View 1 Replies
View Related
Mar 19, 2013
I want to export data from AC3D to Excel; I've tried to do it with copying directly the tables I made, but it isn't text or number format.For example, I want to get the data from this table:
I know that with previous versions of autocad it could be done.In addition, I also want to get value table of the calculated cant of the "Cant Tabular Editor":How can I get a table of this data? I need it because I have a lot of curves and I want to do some verifications of the standars of my country.
View 4 Replies
View Related
Jul 19, 2013
I am trying to delete a few rows in both my pipe table and my structure table but the 'remove items' button doesn't work.
View 2 Replies
View Related
Jan 23, 2012
I am working on a corridor project where I have to make section views of the road. I created my sample lines by range of stations, and made all of my section views from there. Now I need to add volume tables for each section view.
I have 28 section views, and more to come when I do another set of sample lines for another road, and I don't feel like going through each section view individually to make volume tables for them.
Is there a way I can create total volume tables for all of my section views at the same time? It would save a lot of time!
View 3 Replies
View Related
Apr 12, 2012
I've got the Pipe Table style just as I need it except for one thing. I have all circular pipes and I would like the "size" column to display in inches rather than in feet. In the past I was able to multiply this number by 12 in the style composer but that doesn't seem to work anymore.
View 2 Replies
View Related
Oct 16, 2013
Where the majority of people annotate their drawings. A major improvement I recommended to the plans was to place our annotations in our XREF drawings instead of placing them in model space of our sheet sets. (Our sheet sets are our drawings that have our titlblocks that we plot from ). So, I am asking where do the majority of CAD users like to add annotations to there drawings? PaperSpace, model space, xref’s, etc. and why they do it that way?
I should also state that we are transitioning from 2012 software to Civil3d 2014 software too.
View 3 Replies
View Related
Sep 12, 2012
I am trying to label my drawing (bearings and distances) and am having a bit of trouble. . First, the precision isn't right. I keep trying to set the precision but whenever I add a parcel label it comes up with the wrong precision. Also, I can't get the scale of the labels right. They are too big and I can't seem to size them down any smaller.
View 2 Replies
View Related
Sep 20, 2011
When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
View 4 Replies
View Related
Jan 12, 2013
I am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.
View 3 Replies
View Related
Oct 4, 2012
Is there a way to add a field within a label style? I made a custom alignment label and I would like to add a field that references a sheet (I'm using SSM) i.e. "See Sheet 1-2".
View 6 Replies
View Related
Jun 4, 2013
I opened a project that i had not been into for a month and for some reason the surface and labels will not rebuild automatically anymore. Surface is set to rebuild automatic and i've gone in and changed the regenauto from on to off to on again, also rebooted the computer with no luck. I have a combination of feature lines and points. If I edit the elevations along the feature line the contours do not rebuild and the label does not change either. If I hover over the elevation node in the feature line it will show the new elevation but the elevation label for that point does not reflect the change, neither do the contours. If it is a point and I change it with the panorama window, the elevation tag will change but the contours do not rebuild until I tell it to rebuild. Any slope labels going to that point do not update with it though.
View 2 Replies
View Related
Oct 25, 2010
I need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies
View Related
Oct 17, 2012
I worked this out with C3D back in the day but for some reason I can't figure out how to renumber line tag label designations. What's making it tougher is that I need to create the tags in a block and try to create the line table OUTSIDE the block (this is so that I can have the block rotated to a deed bearing with dynamic labels in the block while retaining it's true orientation from state plane coordinates in model space). I have an old lisp file CLEARTAGS.lsp but this is not working. Perhaps this was made for 2010 or earlier. When I save the block, it jumps all the tag numbering way up for some reason.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 3 Replies
View Related
Aug 15, 2013
I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
View 3 Replies
View Related
Dec 16, 2013
I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
View 9 Replies
View Related
Jul 18, 2012
How can I add the multileader panel onto my annotate tab on my ribbon?
View 4 Replies
View Related
Jul 25, 2012
acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
View 6 Replies
View Related
Apr 4, 2013
On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
View 7 Replies
View Related
Apr 29, 2013
My sections are showing a label for some of my links that are coded as "top". My label style for the "top" link is set to none and some of the labels are still displayed.
The labels show in the sections, but not the assembly. We are running Civil 3D 2012.
View 2 Replies
View Related
