I'm using AutoCAD Architecture 2012 for interior design. I need to rotate/move some materials, I know how to do it, but after mapping it, when I need to make any drawing modification, the mapped material resets to their default, and not ionly the modificated solid, but everything that I have mapped.
How do I save the mapping coordinates, to avoid the need to map everything everytime?
It dosent seem to matter if they are check or not in the status bar menu or in the profile settings.
View 1 Replies View Relatedwhe i try to draw a pline it accepts the first numerical entry but locks up on the second point. Also when i use this command no matter what layer it is on the line becomes very fat
autoCAD architecture 2013
This is a command I frequently use. However, upon installation of 2010 Architecture, this right click option is usually greyed out, and doesn't allow me to use that command. Nothing different than how I normally use it.
[URL]....
What is the best way to setup Plot Co-Ordinates that have a tag that updates as you move the co-ordinate point and also I would like to schedule these points in a table ..
for e.g. :
Plot A
_______________________
E 123456.789 N 123456.789
Is there a way to lock the material of an object, ie wood grain on a stud, so if the stud is rotated, the material stays in the original orientation to the object instead of stay relative to the world?
View 2 Replies View Relatedwhat I can do, to maintain project world coordinates at exact place when moving UCS and PLAN.
For ex.I have this project, In witch I'm making house plan on one of those plot, to draw in comfortable position I want to rotate view with UCS.
I type such command UCS/ OBJECT/ pick an object and ENTER, then PLAN/ CURENT and hit enter, now I have comfortable plan position to work with.
The problem of all this, is that when I redo all backwards, coordinates doesn’t correspond to previous places.
Material mapping.
When I apply a material to a mass element the material follow the world UCS, that's ok with me. But when i rotate the mass element the material map remains with the world UCS but not with the object.
How to lock the material map to the object when I rotate it.
I am having a hard time creating a material takeoff schedule in ACA 2011. I can't seem to get it to give me a square footage of any material. I can get the left and right side gross or net square footage.
I created the walls with components and mapped materials to these but I can't seem to get that info in the schedule.
New to Architecture, and am having trouble figuring out how to make the exterior of walls a different material than the interior...
View 8 Replies View RelatedI want to change the color of a material definition in 2d wireframe (plan view). For example, for walls, when the mat. def. is checked in the wall display props, the hatching shows orange->color 30.
When I look at one of the materials listed for said wall, in style manager, for that display component, there are diplay components similar to an object format, but in the mat. def. the components control the color (see attached example).
Now is there a "master setting" to change them - I want to change say the plan linework or section hatch to a different color to match our layer color standards or do I have to go into every since display rep. for every single mat. definition and change them or is there a way I can do it once & all will change?
The out of the box objects are great but what I am worried about is that those colors that are given don't work well with our office standard, esp. if we go back to old projects.
Is there a way to change the material definitions to CTB format in the plot style under the material style? See attached image.
I have a client that wants everything in CTB format and in AutoCAD Architecture. I can get the drawings into CTB but the materials plot way too heavy and when I go in the styles they show Full Saturation or Wide, Thin from the STB plot styles.
The Drawing is in CTB and I am pulling my hair out trying to get the couple materials used set to Color based plotting.
I am using Autocad 2011 just download it and its all perfect if you consider that I was stuck with 2008 before...
My problem is that I m creating objects from the tool palette (doors, windows, walls) and I cant change their material..
Im trying to create a material for glass balustrade that will elevate and show outline but not block what is behind. Useful for shr screens (show tiling, taps etc) balustrade for balconies, stairs etc.
I have balustrade I'm working on now using a railing object. There are no posts at all and I'm using dynamic posts with a nothing material to cut up the guardrail material into pieces. So need the posts to disappear but stil cut the glass into sections. Also in elevation, need to see the glass outline but also to show what's behind. Normal glass in elevation rightly blocks what's behind (inside).
There is a problem with how materials operate. You are unable to use an object/material combination as a negative. For e.g. assigning my posts above a material that has 3d body turned off negates it impacting the glass (ie no longer cuts) so I have to 'see' the gaps otherwise the glass goes straight thru. The post has to be directly inline with the glass to cut (fair enough) but turning the 'gap' material 3D body display off and the railing def no longer sees the post cutting the glass just because 3d body is turned off in the material display. (not sure why these have to be linked. If glass has frame (shr screen) then it's ok. just turn off glass but if in the case of glass balustrade you need to be able to do it.
Im thinking maybe using another object rather than railing, like a curtain wall and having a very small width frame using normal glass material that will elevate and another glass material that will disappear.
I am just getting started with ACA 2010 and am impressed at what it can do. However, I am trying to change the material for 1 wall or 1 slab. When I try, it changes the material for all walls or slabs. I have read something about a propagate option on the materials menu, but I can't find it.
View 5 Replies View Related Im doing some pictures for a broschure.
There are several products to render out and I like each product to be viewed in same position.
When i rotated the product in a view i like can I save the position coordinates and set them later in another product?
get the same view position all the time?
I tried to use the command "Remove Material" from the rippon, and I get no rsponse, and deleted the material from the palette and yet the material there, How can I get rid of the materials I attached to the walls?
View 1 Replies View RelatedI have a Material Definition for my Roof Object. I prefer to keep it a Roof Object instead of breaking it into slabs. See Display Properties image for settings. I have Surface Hatch turned on.
Model views show the hatch correctly.
Elevation views show the hatch correctly.
Plan views do not show the surface hatch at all.
How can I get the surface hatch to show in plan? I have tried changing the cut plan height. It seems I am making something more complicated than it should be.
I have a user that has created a new material which is now sitting as a local style. We require this new material in the library so that everyone can use it. I tried RMB on it but the save to library functon is greyed out. This is due to the styles being read only in the project file. So I have tried to change the project file so we can add the style and then I'd change it back again, but, even though I have checked out the project file from vault, it won't allow me to edit it. What else can be locking the project file? Is there some other way I can place the new material into the style library in the project file? There are quite a few of us that use the project file since we use vault, so I'm not sure I should create a new one with the same name and save over it.
View 3 Replies View RelatedI knew how to do this in inventor 2011 but now that i installed inventor 2013 I forgot. How to create a new material and save it for future use in inventor 2013?
View 3 Replies View RelatedIn the Picture u see a spline (with and witouht render-mesh). I want to animate the deformation of the Spline/Vertices, without assigning each vertex to a keyframe.
First i thought i can do this via the Morpher-Modificator, but the animation happening there was not the one i was looking for.
Is there a chance to rig/save the Vertex-Coordinates to a Manipulator. So i can easily go from Shape1 over Shape2 to Shape3?
we need to be able to collect (save to a list) a series of x,y coordinates as each object in an AI file is selected. Can this be done by creating a script of some kind that runs concurrently with Illustrator? Is this something that can be done via Action Scripts?
View 2 Replies View Relatedi am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies View RelatedI put a new material in the material editor. However long later, I save the max file and when I come back to it, the material editor does not have the material I previously created in there.
The get it back I have to 'eyedrop' the mesh to retrieve it.I've not seen this before in any version, and I use the compact material editor.
Is this another bug with this version, or is this a strange new feature added?
I can delete every unused material except one in the Material Editor.I am trying to make the custom Material library and somehowI have got the Material I cannot delete. URL....
View 9 Replies View RelatedI am in the samill building buisness. While designing I thought it would be nice to show logs on our equipment. Is there anyway to show bark on drawings to show the texture on the final drawing?
View 1 Replies View RelatedThe automatic save option keeps shutting off on one person in our office. She says she is not doing anything weird but all of a sudden, when she checks her auto save settings, the check box is clear.
View 8 Replies View RelatedWe wonder how we can save a dwg to editing restrictions. For example: We send a DWG file to an external user by only allowing him to view the file. We want to disallow editing of the file. Is it possible?
View 2 Replies View RelatedRunning CAD Arcitecture 2010 and I am not able to use the "save-as" function to save as a dwg file. Using the the same down-load disk I have not had any problem with "save-as" on my laptop.
View 3 Replies View RelatedBefore I save a drawing in AutoCAD Architecture, I hit ZOOM EXTENTS so the thumbnail preview is accurate and so it comes up the same way the next time it's opened. Unfortunately, after doing a ZOOM EXTENTS, SAVE & CLOSE, upon re-opening the drawing, the view shifts downward, which usually covers up the title of the drawing.
View 1 Replies View Related