I am just getting started with ACA 2010 and am impressed at what it can do. However, I am trying to change the material for 1 wall or 1 slab. When I try, it changes the material for all walls or slabs. I have read something about a propagate option on the materials menu, but I can't find it.
View 5 Replies
I want to change the color of a material definition in 2d wireframe (plan view). For example, for walls, when the mat. def. is checked in the wall display props, the hatching shows orange->color 30.
When I look at one of the materials listed for said wall, in style manager, for that display component, there are diplay components similar to an object format, but in the mat. def. the components control the color (see attached example).
Now is there a "master setting" to change them - I want to change say the plan linework or section hatch to a different color to match our layer color standards or do I have to go into every since display rep. for every single mat. definition and change them or is there a way I can do it once & all will change?
The out of the box objects are great but what I am worried about is that those colors that are given don't work well with our office standard, esp. if we go back to old projects.
where can I find detail coments of roof trusses. how do I get them in my detail components library?
View 1 Replies View RelatedI know how to add components horizontally to a wall like brick in the front and air space, etc. My question is how to have bottom 2 feet of wall to be of one material and the top of another material.
View 2 Replies View RelatedI need to have 4" piers ont my exterior wall. We are will be using 12" cmu at the piers with 8" cmu at the typical wall with 2" insul wrapping around it all. I am trying to use wall modifier to do this.
View 4 Replies View RelatedIs there any easy way to globally edit lineweights of certain components? Several of the components look fantastic at one scale and terrible at another. Some we just need to lighten but I cannot find where to edit them. I can always (of course) edit the block once it is inserted or edit layers in each drawing but would prefer a more permanent solution.
View 1 Replies View RelatedI am using AutoCad Architecture 2011. In the Style Manager, I created a wall style using a 8"CMU unit plus a 2" insulation board. I have a gable roof slab that intersects with the wall. I want to trim the insulation board along the bottom of the roof slab, and show the CMU above the roof slab.
View 3 Replies View RelatedIs there anyway to suppress or disable the save as jpeg options dialog box on individiual images/pictures?
View 1 Replies View RelatedI am drawing a house with a hip roof. The roof has a overhang with fascia and soffit. What is the best way to construct the components of the roof system. Should the hip roof and the soffit with fascia to be one system or two separate systems?
View 3 Replies View RelatedIs there a way to lock the material of an object, ie wood grain on a stud, so if the stud is rotated, the material stays in the original orientation to the object instead of stay relative to the world?
View 2 Replies View RelatedHow can I change the layer of a terminal of a components to that component layer without going through each terminal. That is , a block XX has terminals a and b. The XX is currently on layer A and the terminals a and b on layer B. How can I move the layer of a and b to layer A?
Also, I have a 10 page drawing in which I want to tie some components to a particular layer. How can I do this without going through each drawing and doing the changes?
Material mapping.
When I apply a material to a mass element the material follow the world UCS, that's ok with me. But when i rotate the mass element the material map remains with the world UCS but not with the object.
How to lock the material map to the object when I rotate it.
I'm using AutoCAD Architecture 2012 for interior design. I need to rotate/move some materials, I know how to do it, but after mapping it, when I need to make any drawing modification, the mapped material resets to their default, and not ionly the modificated solid, but everything that I have mapped.
How do I save the mapping coordinates, to avoid the need to map everything everytime?
I am having a hard time creating a material takeoff schedule in ACA 2011. I can't seem to get it to give me a square footage of any material. I can get the left and right side gross or net square footage.
I created the walls with components and mapped materials to these but I can't seem to get that info in the schedule.
New to Architecture, and am having trouble figuring out how to make the exterior of walls a different material than the interior...
View 8 Replies View RelatedIs there a way to change the material definitions to CTB format in the plot style under the material style? See attached image.
I have a client that wants everything in CTB format and in AutoCAD Architecture. I can get the drawings into CTB but the materials plot way too heavy and when I go in the styles they show Full Saturation or Wide, Thin from the STB plot styles.
The Drawing is in CTB and I am pulling my hair out trying to get the couple materials used set to Color based plotting.
what switch is it that needs to be changed so that when one opens up multiple drawings, they aren't sitting in the taskbar? Normally, you go to your 'Window' in the menubar to see your populated list.
View 4 Replies View RelatedHow do you add the menu bar back in across the top and also how do you add the traditional "File", "Edit", "View", etc..
View 3 Replies View RelatedI am using Autocad 2011 just download it and its all perfect if you consider that I was stuck with 2008 before...
My problem is that I m creating objects from the tool palette (doors, windows, walls) and I cant change their material..
Im trying to create a material for glass balustrade that will elevate and show outline but not block what is behind. Useful for shr screens (show tiling, taps etc) balustrade for balconies, stairs etc.
I have balustrade I'm working on now using a railing object. There are no posts at all and I'm using dynamic posts with a nothing material to cut up the guardrail material into pieces. So need the posts to disappear but stil cut the glass into sections. Also in elevation, need to see the glass outline but also to show what's behind. Normal glass in elevation rightly blocks what's behind (inside).
There is a problem with how materials operate. You are unable to use an object/material combination as a negative. For e.g. assigning my posts above a material that has 3d body turned off negates it impacting the glass (ie no longer cuts) so I have to 'see' the gaps otherwise the glass goes straight thru. The post has to be directly inline with the glass to cut (fair enough) but turning the 'gap' material 3D body display off and the railing def no longer sees the post cutting the glass just because 3d body is turned off in the material display. (not sure why these have to be linked. If glass has frame (shr screen) then it's ok. just turn off glass but if in the case of glass balustrade you need to be able to do it.
Im thinking maybe using another object rather than railing, like a curtain wall and having a very small width frame using normal glass material that will elevate and another glass material that will disappear.
I want to export the length of each polyline individuality & simultaneously in different -2 columns/row. How to prepare the Bar bending schedule. I am appending the drawing .
View 1 Replies View RelatedIs there an option to eliminate AutoCAD from automatically inserting the layout tab name into the file name when creating a PDF? Once upon a time it would only use the file name (i.e. A-101). Now it uses "A-101_Layout1" (or whatever the layout name is) by default. I either have to live with it or manually change each file name during the process of creating the PDF or after it's been created.
View 1 Replies View RelatedHow do you modify the database and generate the size of items needed within the software from the Detail Component Database? Can you Adjust sizes? Are there more items to select?
View 1 Replies View RelatedWhat is the command line procedure to restore or reset the preset Isometric views. e.g. SW Isometric, SE Isometric etc.
Just want to create a lisp to set these views but I need to know the command line input.
My content browser doesn't have the original options it used to have, instead it has a customized version. But the customized version does not have anything in it. How do I get it back? No matter where I search in CAD or in my files I can't find the original. Do I have to uninstall and install the program again?
View 2 Replies View RelatedI tried to use the command "Remove Material" from the rippon, and I get no rsponse, and deleted the material from the palette and yet the material there, How can I get rid of the materials I attached to the walls?
View 1 Replies View RelatedI have a Material Definition for my Roof Object. I prefer to keep it a Roof Object instead of breaking it into slabs. See Display Properties image for settings. I have Surface Hatch turned on.
Model views show the hatch correctly.
Elevation views show the hatch correctly.
Plan views do not show the surface hatch at all.
How can I get the surface hatch to show in plan? I have tried changing the cut plan height. It seems I am making something more complicated than it should be.
--Is there a way to do a door schedule by styles rather than individual door?
--To clarify: I want my door schedule to create a new door number only when one or more of the property sets, classifications, or door styles pertaining to a door are not defined by other doors in the schedule. This would facilitate giving the same door number to multiple doors that have matching schedule information, and cut down on my schedule size.
--how to do this. If I need to create custom tags, schedules, or formula properties.
Is there a way to export multiple layout tabs to create individual CAD files at one time? I have a CAD file with 80 layout tabs. All the Drafting work was done on Paper Space of the Layout Tabs. Client wants 80 separate CAD files.
I tried right clicking on the layout tab but it will ONLY allow me to export one tab at a time.
When I try to render, some materials get transparent. The solution is to set the view-backgroundcolor to 'none'
But I want a gradient background.
See attached files for example...
problem i'm facing when ever i tried to apply a material to an object in AutoCAD 2010,I have set all the necessary thing required for the material to be visible such as visual style(Realistic/Conceptual),Material/Texture(on) and any of the isometric view.Below is a captured image of the problem.
View 1 Replies View Related
