I put a new material in the material editor. However long later, I save the max file and when I come back to it, the material editor does not have the material I previously created in there.
The get it back I have to 'eyedrop' the mesh to retrieve it.I've not seen this before in any version, and I use the compact material editor.
Is this another bug with this version, or is this a strange new feature added?
Have just installed Revit 2014. Material editor will not open with icon (Manage>materials) or Type Props>Edit Assembly>Material. Additionanl Setings>Material Assests is greyed out. I have gone back to a project where I know the Asset Library is loaded as well as trying in one of the new sample files. Additionaly means I cant add or change any layers in Edit Assembly.
View 1 Replies View RelatedWhat have happened with the material editor(slate?) in 3ds max 2014, its takes years to render a material compared to render the same maps and material in 2013.
Problem does not stop there, quite often the whole 3dsmax dies to when it stucks on a material?
In version 2013 there was a menu option at the left lower corner of the material editor.
But in 2014 it is gone. Can not find it in the application options. How can I change it?
So I have this issue where opening the compact material editor a second time causes 3ds max design to totally crash. I cant figure out why it is doing that. I have tried reinstalling the software, even tried re-dowloading it and nothing works, have all the service packs and so on. Funny thing is that it works when using the slate editor. I can recreate the bug every time. Just open 3ds max design 2014 x64. Press material editor (assuming its in comact mode), close the editor and then open it again. Immediatly the program will crash to desktop, telling me that the progam has stopped responding.
View 1 Replies View RelatedI have Revit 2014 student version installed on my computer.
Í can´t open or change materials. The button with 3 dots in it just will not open.
When selecting a material from the dropdown list the material isn’t downloaded correctly.
I had just edited the appearance for that material, pointed it to a new bitmap, then added the appearance & material to the library. Then purged it all from the document.
Restarting Inventor results in the material being downloaded from the library correctly.
dataset
Video showing the behaviour [URL]
Factory Design Suite Premium 2014 64bit
Vault Professional 2014
Win7 Pro 64bit
How to get the all the materials back in the materials palette?When I switch to 3D Modeling and go into the Render Tab in the Materials section, I do not have any materials loaded.
View 5 Replies View Relatedit is a lot of time that I noted that if I convert a RAW file from my Canon camera in TIFF and then I post elaborate it with GIMP, I obtain a file without EXIF. No problem whan I convert the RAW file in jpeg.
note for instance this jpeg file obtained from a TIFF file with GIMP: [URL]
I can delete every unused material except one in the Material Editor.I am trying to make the custom Material library and somehowI have got the Material I cannot delete. URL....
View 9 Replies View RelatedIm on Max 2011 with sp1 and the latest hotfix installed, working with vray 1.5 sp5. When i try to re-set mu material editor (compact not slate) i get the folllowing error message
"Runtime error: cannot assign undefined to material editor slots" and a Macro_media utilities window opens with the following script
macroScript clear_medit_slots
enabledIn:#("MAX", "VIZ")
category:"Medit Tools"
internalCategory:"Medit Tools"
ButtonText:"Reset Material Editor Slots"
tooltip:"Reset Material Editor Slots"
[code]....
I'm not a scripter but it seems that there is no material defined to place into the slots on re-set. I've recently had a problem with my material editor not giving me acess to slate as i had loaded up my 2010 menus into 2011 but i've since re-installed max and vray and am still getting this.
The material editor on my desktop is cut-off near toward the end. I cannot reach what I need to reach; the scroll bar won't go anymore downward, though it should.
How can I dock my material editor so that it continues on another column?
Please see screenshot and note the bottom of the material editor.
Due to some reasons I had to (first i've repaired 3ds max, but it couldn't start at all - "not responding" from very first second of opening 3ds max shortcut, and after that) uninstall and reinstall 3ds max 2011. From first open try it had ribbon problem, but ok, not using ribbons too much. But after working for a half day, there's some problems with material editor too...
What i should do now? repair it or uninstall and reinstall it again?
I Open material editor select at open/unused material..I use mental ray so all of the slots are Arch design materials.I go to change the Arch design material too whatever.... Freaking max crashes…
Apple IMac: 27" screen OC i7 4.5 Ghz, x1 256 SSD HD, x1 2TB HD, 32 GB memory. All Adobe software, and Blander 3d 2.61Wacom Intuos 4*, 3D Connexion space explorer* (*shared)Custom windows worstation:3Ds Max 2012+Hotfix 1, OS - Windows 7 Pro x64 Sp1, i7 2600K OC 4.5GHz , 16GB 1600mhz ECC DDR3 Ram, Quadro 4000, OCZ vertex 2 90GB SSD, 2x 450 gig 10,000 ,Wacom Intuos 4*, 3D Connexion space explorer*(*shared)
My material editor won't appear when I click the button on my tool bar. The button toggles between on/off but the material editor menu never actually shows up. I've restarted my computer, I've minimized then maximized the program window, I've moved the program window back and forth between both of my monitors, I've tried opening it by hitting "M"...nothing seems to work.
View 2 Replies View RelatedI have made a scene with a metal teapot (i have added it to to the showcase) but now i have deleted the teapot and added and object (a logo) form another project (also in 3ds max 10) and this object has an complex material (multi-sub material with 9 different materials) and i know that there is a way to add the material from the object to the editor but i don't know how...
View 6 Replies View RelatedHow to assign more than 0-15 material IDs in the old material editor?
I don't use Slate. Does it allow more than 0-15 material IDs?
We're discovering some sort of disturbing differences in some of the shaders in the Slate versus the traditional material editor. You can find them everywhere, but a good example is the Matte/Shadow/Reflection material. Under Additional Params in the Slate node you'll find more parameters than are in the Compact editor (also what is called the Parameter Editor in Slate). Found no information on these extra parameters. See the attached image. Substance maps are another example of different parameters.
The attached image shows parameters missing.
Materials do not show-up in either Iray or Mental ray Compact Material Editor mode.
View 4 Replies View RelatedI can't seem to find where the shader parameters are in the compact material editor in 2013. When In the attached picture, I've shown how it looks when I open it.
I've looked all over online and checked out every rollout in the editor and can't seem to find it anywhere... and all the online tutorials (lynda, etc) say they're for 2013 but are really for 2012.
As the title says - How can I add a material to material library through Slate editor? I created the library and it appears as a tab to the right but how do I place my materials there? I tried dragging and dropping the node but that didn't work. I also tried right-clicking the node and searching there but nothing there either.
View 2 Replies View RelatedThis is what my material editor looks like:[URL]
I can't get the globes to show. Am I missing something, or is it some kind of faulty installation issue?
All of a sudden, I was able to see my texture/material in the background of the UV Editor, but now its gone and I don't know how.
Software use: Autodesk 3DS Max 2012
PC Info: Intel Core i5 Quad 3300 3.2 Turbo on AsRock Z77 Pro3 Motherboard, 8GB PC12800 1600 GHz Memory, Zotac GeForce GT 630 1GB, with Windows 7 Home Premium 64-bit OS
characteristics of each of the maps in the editor material?
View 2 Replies View RelatedIm having trouble with my viewport once my material editor is open. If I try to play my animation once my material editor is up it plays very very choppy. It didn't before I open the material editor. Its happening with all my scenes and I don't have any animated maps or very high res maps in the scene. Most of my scenes are very simple and still getting choppy viewport playback. If I close down the Material editor I still get the same performance when I play my animation. The only thing that I have be able to do to fix this is restarting max. Once I restart max it will work fine as longs as i don't open the material editor up. I have a top of the line machine from HP so i don't know what is going on.
View 2 Replies View RelatedHow can I get glossy result in Slate material editor? I do not seem to have any problem in compact material editor with glossy and reflectivity set to 1
View 7 Replies View RelatedI'm having a issue with the material editor. Whenever I use the shortcut (M), it randomly quits. No error message what so ever, just quits. I've reinstalled it twice, deleted everything. By everything, I mean every single folder and registry key that has to anything to do with 3ds Max or Autodesk - but the problem continues.
View 3 Replies View Relatedthe file is not optimized in any way, I probably made all sorts of bad decisions that have ended up with me having an unwieldy file that is hard to work with, but it's doing the job for me.
However, I have to make the same change to around 30-40 materials that I created which each have their own individual bitmaps assigned to them, as they all have different text on them.
I want to remove the opacity mapping from each one, but opening each one and making the change, then saving it, is ridiculously long winded with the file performing as bad as it is (running on an SSD with an i5 chip and 16gb RAM.....)
So I'd like to know if there is any way to, for instance, open all those materials in a text editor and manually remove the opacity setting. They are all in "scene materials" in my document.
Maybe I could add them to their own library, open a blank document with this library, edit them there, and move them back?
I just had 3ds max hang while I'd updated half the materials
I have exactly same question as here: [URL] .... but this solution does not work in 2012 max.
first of all i don't have that "enu" folder with defaults. however i found defaults/designviz.mentalray/medit.mat (designviz.mentalray is scheme that i'm using) but changes to that file doesn't have any effect. after that i've tried to activate designviz.mr scheme again and restart 3dsmax, still no effect.
I'm trying to edit some material properties before rendering. But suddenly, I can no longer open up the Material Edit window. I searched and it said to look where it was last opened. Ok, I did that because I was using it this morning. But then it disappeared for good and I cannot figure out how to re-open it. I've cold booted my computer and restarted AutoCAD but the results are the same. So what am I missing. This copy is AutoCAD 2013 and it has SP1 and SP2 loaded.
UPDATE: OK...something weird happened. I finally found it but it was hidden beneath the other icons which I have anchored on the left. I was only able to get to it by carefully placing my mouse on a piece of it and dragging it out into the model space. So, what gives and how can I avoid this in the future?
In Inventor 2014, is it possible to export a list of all of the materials in a given material library..? As text, or into Excel, or something similar?
I have a material library in Inventor 2014 containing lots of custom defined materials. I would like to create a master list that I can give to someone who isn't using Inventor. The only property that I really need to export is the material name, e.g.' CSA G40.21-44W'.
In this case, engineering is trying to coordinate better with purchasing, by making sure that materials are specified in the same way in both departments.