I've always used the spacebar as Enter, it speeds up the way i work.I've just load 2013 and i'm using the Drafting & Annotation workspace, now when i use the spacebar it jumps to another command, i have to use the enter key to get it to do what i want.For example.
Type H, (spacebar), S, (Spacebar).
This should be - Hatch > Select,
instead i get 'Hatch' then it cancels the hatch commands and jumps to 'Stretch'
i have a mac air 10.8.3 with cs6 V13.1.2 x64. The machine is running fine. I use an external usb apple keyboard, which is brand new (having just been returned from apple after a warranty case).
Launching Photoshop causes the space bar, the enter key, the up-down-left-right keys to become unresponsive to the entire operating system, even after photoshop is closed. Restarting the mac resolves the issue. Photoshop is the only foreground application launched, nothing else is running (other than background services and things like dropbox, sip, etc).
The issue affects both the external usb keyboard, and the in-built keyboard.I have tried deleting my photoshop prefs file, which makes no difference.
I have noted that bringing up the keyboard viewer ( Keyboard preferences > 'show keyboard & character viewers in menu bar'; then from the icon choosing 'Show keyboard viewer' ) will not show the key as being depressed. CLICKING on the SPACEBAR key, the ENTER or ARROW KEYS in the keyboard viewer also does not work!
when I insert a block from the tool pallet I want to be able to rotate it 90 degrees with the spacebar (just like revit when inserting a component).
How to rotate a block 90 degrees with the spacebar?
Okay so is there anyway to enter the whole equation of an ellipse into autocad and it will map it? ex x^2/a^2+y^2/b^2+z^2/c^2=1 with different values for x y z a b c. I want to generate different ellipses and then loft them together?I just want one the starts with the basics and goes all the way to the move advance stuff.
View 3 Replies View RelatedI recently, can not enter my steel of drawing space.
The following warning displays.
Is there any possible way to enter a G Code into AutoCAD to end with the result of a 2D drawing of what my CNC has made? I have the code from the machine, and am not sure how to input it into the program to draw the face the CNC has cut out.
View 9 Replies View Relatedwhy I get a this when I click on a tab in the Options dialog box?
View 2 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
For years I've been able to hit the spacebar while dimensioning to cancel the appearance of a dimension. For some strange reason, this no longer works and when I hit the spacebar, the dimension process won't continue unless I hit enter and of course it then shows the dimension I didn't want to appear. I can over ride a dimension on the fly, but in this case I just don't want the dimension to appear. I'm thinking a Dimvar got changed.
View 1 Replies View RelatedSince Inventor 2010, the spacebar has the functionality of repeating the last command. We have an add-in that requires typing a short phrase. (You can see where this is headed)
Whenever you use the spacebar to seperate the words in the phrase, a new addin form opens in front of the old one.
This add-in is employing the WordWrapper code that Brian submitted some time ago to clear up a similiar issue when you used the Enter key, but the spacebar problem persists
Is there a way to disable this funtion? Or work around it?
In CS4, holding the spacebar down when using another tool for panning does not work, in photoshop or anything else. Works fine when pan tool itself is selected. Very irritating behavior. I've used photoshop since v6, so I'm pretty use to the way it works. Same in Illustrator, InDesign, InCopy, and Acrobat.
View 3 Replies View RelatedI'm using PS5 version 12.1 and I'm arranging a lot of layers so I do a lot of zooming and then hitting the space bar to move around. But 90% of the time I get kicked into birds eye view. And I know for a fact that the hotkey for Birds Eye View is 'H' This extra step of getting kicked into birds eye view whenever I want to pan is tossing a monkey wrench into my workflow.
View 2 Replies View Relatedi have always used spacebar+command/alt to zoom in/out but now suddenly its not working..! command+spacebar now toggles the MOVE tool...!? spacebar+alt is still zoom out, and i noticed that the right command+spacebar is still fine but i just cant get used to using it i have always used the left command+spacebar....
View 5 Replies View RelatedI am running CC on an iMac with Mavericks. It is a brand new system. My spacebar hand tool seems to be disabled. I have tried opening Illy while holding Shift/Option/Command.I have disabled the Command/Spacebar shortcut in Spotlight..The tool doesn't work in Photoshop either. I have looked high and low and have made no progress.
View 11 Replies View RelatedThe spacebar is no longer inserting a space between characters.
I tried switching from my wireless iMac keyboard to my wired Apple keyboard; replaced preference files; booted from several other partitions (that share the same Photoshop app); checked the character palette for kerning and tracking; and tried different fonts.
It may be that I have to trash the preference files and completely reset them... but I sure hope not.I've tried two backup preference files .
I just downloaded the CC trial for photoshop, then started using the elliptical marquee tool but when I try to use the spacebar to move the selection the selection will only move a few pixels then wont move at all. Also i have the screen flickering problem.
View 2 Replies View RelatedMy paragraph ends up asabc abaaacba abaca abacabac abcabac abacabc
Rather than
abc abaaacba abaca
abacabac abcabac
abacabc
is there a way to use the spacebar for panning around a document like you can in Illustrator?
That is one feature of Illustrator that I do like when I use that program.
I can use the pen tool, hold down spacebar to move the image then when I release the spacebar it automatically goes back to the pen tool or whatever tool you are using.
I've used CorelDraw since version 3 and admit that I can't figure out how to do this in Corel.
When using typetool in AI CS6, when using spacebar, texttool stops.
When using spacebar textool immidiatly stops.
How to fix this?
When working on a document (in PS cs6) and pressing the spacebar to quickly access the hand tool it doesn't do anything.
What I've tried so far:
-resetting the presets
-change the shortcut key (wasn't possible)
-reinstall
-googled
How about add this feature to Photoshop?
Hold down mouse middle button = hold down spacebar panning?
While using the pen tool, moving the current anchor point by hold down the spacebar, is a great time-saver and I use it frequently. But I find it a little frustrating that, when closing a path, the "spacebar" feature does not work. Instead, the apposing direction point goes whacko. Is there an alternate keyboard shortcut to overcome it? Even though I "know" it won't work, I seem unable to resist holding the spacebar to fine-tune the last anchor point.
View 4 Replies View RelatedCommand and spacebar has always allowed me to draw a marquee around what i wanted to zoom. not now? what am i doing wrong in inDesign6?
View 5 Replies View RelatedI am using the type tool in Photoshop CS6 (windows XP pro) and I am running into this weird issue. I have never seen anything like it before. It isn't my keyboard or computer, it only happens in Photoshop. When I am typing and I mess up and use backspace to delete a character, the next character I type in gets doubled. Random letters will pop up as well - such as when I type "S", the letter "U" shows up... when I press the spacebar, it adds an extra letter instead of a space (the following letter or previous letter used). The cursor gets placed before that second character too. I can delete it using backspace or delete but then if I press spacebar to continue, it shows up again and again. I can't get rid of the extra characters!
I've tried activating and de-activating various key locks on my keyboard to no avail. Is there some button I pushed or weird formatting I somehow accidently implemented?
Running the CS6 trial on a Windows 7 Laptop (x64). I was in Photoshop (64), and noticed that when I held down the spacebar to pan the open image, the hand icon would show but the tool will not work. No matter how many times I click and drag, the image stays still. If I select the MANUALLY select the hand tool it works, but the spacebar shortcut key is non-functional. This issue persists across both the 32 & 64 bit versions of Photoshop.
View 23 Replies View RelatedThe spacebar will not work as a move tool on my computer.I tried closing my browser. Got a fix but it is only for 32bit. Any fix for a 64bit system?
View 9 Replies View Relatedthe spacebar does not work to stop and start film when the time code is flashing (hours, min, seconds, frames any).
View 1 Replies View RelatedI tried the following code posted in the forum, but i need to know how to break the loop when right click/ Enter Key is pressed.
Following is the code i used:
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurEd As Editor = acDoc.Editor
[Code]....
I think my problem should be easy to answer, today out of nowhere I suddenly had to type in the file names for different commands such as "save as" or in the layout options "from template" usually there pops up the standard folder list where you can choose the file you want.
In the pic you can see what happens if I'm clicking on "save as".
I have been working on this framing plan and come to find out - much of the text and some of the lines are being entered off of the 0 - Z plane. get everything down to 0? Flatten does not work and I have searched high and low for a resolution, but I'm not getting anywhere.
I know the lines are mostly at 0, which makes it very confusing that the text would enter off of the 0 - Z plane.
I just installed the educational version of Inventor and when i go to draw a circle in a sketch i cant enter in a specified radius. Any way to enable that?
View 9 Replies View Related