CorelDRAW Graphics Suite X4 :: Using Spacebar Like Illustrator?
Jun 2, 2011
is there a way to use the spacebar for panning around a document like you can in Illustrator?
That is one feature of Illustrator that I do like when I use that program.
I can use the pen tool, hold down spacebar to move the image then when I release the spacebar it automatically goes back to the pen tool or whatever tool you are using.
I've used CorelDraw since version 3 and admit that I can't figure out how to do this in Corel.
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
I am an Illustrator user but I am working with a company that uses CorelDraw. Recently I received several large files from them with bitmapped images within the CorelDraw files. I don't know how they are saving or exporting them, but when i receive them they look like standard Illustrator eps files. However, when I open them, the bitmapped files are embedded instead of linked, which is a no-no in Illustrator. These embedded files have a default resolution of 72 dpi no matter what the original resolution was. So, my question is, what is the standard way CorelDraw brings in bitmapped files and is there a way to export files so that bitmapped files retain their original resolution.
When I export a CorelDraw file with multiple pages to an .ai file, the resulting file has only the first page. Is there a way to export all pages of the document to .ai?
I use coreldraw mainly for pattern making (as well as graphic design) but I would also like to make fashion sketches.
This page has wonderful brushes that would be perfect.
[URL]........
But it is for Illustrator. (Bummer, I dislike that Illustrator is more popular despite that CDR is easier to use). I have yet to purchase the brushes as I am not sure how I can use them in CDR.
I am new to Corel Draw X4 after using illustrator. I created some artwork for a client in hot pink. But when I try to print, or to save as a pdf, or open in illustrator it is not pink.
What do I need to do with my color settings? I have contacted Oki who assisted my in downloading the correct driver to print pantone colors. Therefore must by color settings in Corel Draw?
When I export a CorelDraw file to Illustrator, Corel has a habit of turning all objects into transparencies. So I have to convert them back into opaque objects in Illustrator, which can take a long time since I'm doing illustrations that have on average 1000 + objects, most of them opaque. I'm using the default export settings, and changing which version of Illustrator I'm exporting to doesn't seem to work.
I'm wondering if this is a glitch with CorelDraw X5 or do I have some box checked that shouldn't be?
I have a problem with importing AI files to CDx6. Everytime i do so, the curves split up. Like if i have a circle that i can fil in adobe and then open it in CD, it breaks it apart so i have to join curvs and what not. This is a huge problem when i import templates and such..
I have purchased some clipart where the artist used Adobe Illustrator and it contained extensive Mesh Fills. The artist sent me the same artwork in pdf & eps but I am unable to open any of them with X5. Apparently it is a function of the mesh fills?
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
I am running CC on an iMac with Mavericks. It is a brand new system. My spacebar hand tool seems to be disabled. I have tried opening Illy while holding Shift/Option/Command.I have disabled the Command/Spacebar shortcut in Spotlight..The tool doesn't work in Photoshop either. I have looked high and low and have made no progress.
While using the pen tool, moving the current anchor point by hold down the spacebar, is a great time-saver and I use it frequently. But I find it a little frustrating that, when closing a path, the "spacebar" feature does not work. Instead, the apposing direction point goes whacko. Is there an alternate keyboard shortcut to overcome it? Even though I "know" it won't work, I seem unable to resist holding the spacebar to fine-tune the last anchor point.
