Trying to us SURFPATCH to create a surface from a closed 3d poly (with SP1.1 applied)
The 3D poly on the left worked correctly, but when trying SURFPATCH on the right (axe head shape) the resulting surface id rectangular - why? looks like I will need to revert to EDGESURF - for now
The attached csv file contains x,y,z coordinates and the image number per row (only 1 in this file). I am reading in this file and creating a spline knot at each of these points. The last coordinate x,y,z set closes the splines and creates a shape that resembles a US state. I next extrude it a couple inches and it looks like a hollow 3-D state.
My question is how do I go about capping (or filling) the top and bottom faces? I have a feeling it is a bit more complicated because of the large number of knots, around 127, in this shape. As every time I try and follow the cap surface instructions in the reference it doesn't do what I want. Is there any way to automatically or by using a script join the vertices so that it looks like a mesh grid on the top and bottom and then fill in those areas?
[URL]
I wanna create a command to put in the LISP file. Bascially when I type XV or XH a vertical or horizontal xline will be created and automaticlly put on defpoints layer.
My former office had this and it was very slick and was wondering if I could ad it to my new office
layman what Autodesk is wanting me to change? Trying to use "loft" to skin the surface of 5 polylines. It will do the first, second, third and 5th for a surface, but doesn't like the 4th polyline I created.
View 3 Replies View RelatedAttached is a dwg file that refuses to complete the surface triangulation. Can some try this? The maximum triangle length is set to off. I'm out of guesses. If I move the furthest point around it will complete the surface but just not in it's current location. Point number 69
View 9 Replies View RelatedHow to create hide situation using AM2DHIDE command in AutoCAD 2013? This command was exist in AutoCAD Mechanical 2009. But when i tried to edit this command in AutoCAD 2013, it displyed as unkinown command?
View 3 Replies View RelatedI am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
I have been using AutoCAD to create product designs (baby bottles) for the last three years. I am normally drawing lines, arcs and splines to create the shape, then I use PEDIT to create a closed polyline and REVOLVE to create a SOLID 3D object from that shape.
Couple days ago, AutoCAD is not longer creating 3D solids when I use REVOLVE as usual (even using older files and/or the same shapes or polylines that I have used before to create 3D solids). The result of REVOLVE is "SURFACE (REVOLVE)" (I got that from properties). But, the most uncommon thing is that AutoCAD is revolving fine one or two times per day after many many tries. (normally I am closing and opening files and trying to revolve some stuff many times, using the same process and suddenly it revolves the sahpe as a 3D solid)
I attached a picture showing two objects created using the same group of lines, splines and acrs. One is a solid 3d object and the other one is a surface (revolve) as result of using REVOLVE command. WHY????
I found to model a joystick. I have created a spline mesh, and applied a Surface modifier. The next step is to convert it to an Editable Poly. Fine, no sweat there. The thing is, when i do that, Max creates a ton more vertices; so many that its blatant over kill. My Surface mesh contains only 214 verts, but after conversion, i have over 6000.
Im guessing its adding some kind of smoothing somewhere...? After conversion, the tutorial has no more verts than it did before conversion, and it looks pretty much the same.
Conversion does not add extra vertices?
Intel I7 3.8Ghz, 8GB DDR3, SSD, nVidia 460, Windows 7 Ultimate x64
3DS Max 2011 Hotfix 4 x64
best way to convert a hard surface high poly model to a low poly model for use in a game engine like Unity. I know this model looks rather low poly already but there internal parts that bring this model up to about 220,000 polys. Is the best solution to remodel as low poly? Would retopo be more effecient? What about using zbrush?
View 3 Replies View RelatedIm currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
How can I create closed profile in VBA Suppose this profile includes Line and Spline See attached code in vb
Later I cannot create Extrude feature because previously created profile is open (consists of two separate curves)
How can I join together points in profile which belongs to separate curves to get one curve.
Dim t As Inventor.TransientGeometry
Set t = ThisApplication.TransientGeometry
Dim c As Inventor.ComponentDefinition
Set c = ThisApplication.ActiveDocument.ComponentDefinition
[Code].....
After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
Autocad 2013 closed when I click "A" symbol, "A" symbol meaning is AUTOCAD symbol at upper left corner.
one again, why licence screen didn't display after finishing install ?
Presently the "AREA" of a closed polyline is in "sq-in" first, THEN "sq ft".
For everything I do, and likely others, I need sq ft - without having to waste time and roll my cursor over the results.
Is there ANY way to change this default to have sq ft FIRST!??
After performing a cut, how to create a polygon from resulting edges? Take a look at the this clip for details: [URL].......
View 5 Replies View RelatedI have an ai file containing a U.S. map with each state on its own layer and path. I need to be able to create the poly coords for each state for use in an image map.
Is this possible and how?
My model is ready for the rigging. But my model is a little heavy in poly-count. I can rig it now but at the time of animation i know it will be a problem while animating it. It will lag while moving its controls. I have seen people animating with low mesh and while rendering they use high mesh. Do, i have to create a low poly version of my model?. If yes, Then i have to paint weight twice. low poly one and the high poly one.
View 2 Replies View RelatedI'm trying to create a stage-storage table with six closed 2D polylines. They highlight when I select them, but nothing is loading in the Table?
View 8 Replies View RelatedHow do I solve this problem I cannot join basic lines to make a closed polyline as they will not join together. So i tried to use the flatten command which does not work and out puts error below:-
Command Prompt Input/ouput
Command: FLATTEN
Select objects to convert to 2d...8 found
Remove hidden lines? <No>:
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
I have used PEDIT to join multiple polylines, which now appear as polylines. But when I use QSELECT to show all open (non-closed) section, one polyline still shows up as open.
I've attached the file I'm working on. The polyline in question is the green outline on the object on the right.
I'm trying to look for a LISP command where i will create a closed polyline with 4 sides in different angles. then convert it to region.
View 6 Replies View Relatedis there an option or a lisp routine to create a 3d boundary from closed 3d polylines?
View 8 Replies View RelatedI created a very simple two poly object and then deleted my construction history and now I cannot seem to create a new polygon in the scene unless I turn off interactive creation.
If I choose create>sphere etc the little sign that says drag on grid appears but when I do nothing happens. I made a new scene and did the same thing and I don't have the same problem so Im not sure why in this particular scene.
Just found the issue with my AC2013.
A bit of difference is that the polylines do not have to be even closed. Any polyline gives me exactly the described behaviour, which is definitely not intended. Appears still not resolved.
Have the "ignore version" flag on, but I get this weird message:
The mesh 'standard_exterior_wall1Shape' has no '.fc' attribute. //
for ever mesh I've deleted history on.
I'm working on this model and I am trying to use the surface trim command in cad 2011, but its not working and its pissing me off. I want to use the trim and use the dome in my model as the cutting edge to cut the parts of the curved walls that fall inside the dome but it is not working. I have the file uploaded.
View 1 Replies View RelatedSite layout has moved and rotated a little. Have spot elevation labels in my sheet but unable to use align command. Align command is able to be used but only moves labels rather than move and rotate.
View 9 Replies View RelatedDo I need to create a closed path first? Don't know how.
View 1 Replies View RelatedI have a client that would like me to add closed captioning to his videos.
View 6 Replies View Related