3ds Max :: Cap Surface Of Extruded Closed Spline Surface
Dec 15, 2011
The attached csv file contains x,y,z coordinates and the image number per row (only 1 in this file). I am reading in this file and creating a spline knot at each of these points. The last coordinate x,y,z set closes the splines and creates a shape that resembles a US state. I next extrude it a couple inches and it looks like a hollow 3-D state.
My question is how do I go about capping (or filling) the top and bottom faces? I have a feeling it is a bit more complicated because of the large number of knots, around 127, in this shape. As every time I try and follow the cap surface instructions in the reference it doesn't do what I want. Is there any way to automatically or by using a script join the vertices so that it looks like a mesh grid on the top and bottom and then fill in those areas?
[URL]
View 1 Replies
ADVERTISEMENT
May 17, 2013
I am trying to create a 3D meshed surface from an irregular shaped solid I created using firstly a SPLINE, FILLET, PEDIT, and EXTRUDE. I have a solid in the basic shape now, but I am trying to create a meshed top and bottom (x, y, z,) to change the contours of those surfaces. I have looked at 3DMesh but it asks for (n,M,) coordinates like it is a regular shaped surface (square, rectangle) where one can calculate the required even spacing needed.
My goal is to create in CAD something like a fine art carved piece of wood, with irregular shaping and no straight planes or surfaces.
I have included a basic picture in JPEG format for your review. This is the item from which I am trying in ACAD 2010 to construct into a usable adjustable form so I may parametric for my needs.
View 9 Replies
View Related
Feb 10, 2013
How does one apply a gradient to an extruded surface?
View 1 Replies
View Related
Dec 16, 2013
I have draw in DWG the front view of a ship's frame. I've closed the loop in inventor and extruded the object but I am unable to sketch on most of the surface to complete the side view..??
I can only sketch on one section the upper and lower sections it won't allow me too.
The top should be offset to the right but I am unable to draw the sketch onto the fame.
View 3 Replies
View Related
Jul 19, 2013
The extruded face with System Copy on it has gone really nasty. It looked great before I rendered it! which I daren't render.
View 3 Replies
View Related
Oct 9, 2011
I'm looking for a script for scattering proxies on a surface or along a spline. In previous versions of Max I used Peter Watje Scatter. But itdoesn't seem to be available for 2012.
I don't have enough use for it to justify buying Carbon scatter or multiscatter and I find render farms don't tend to have these plugins anyway. Forest Pack lite only works on flat surfaces.
View 3 Replies
View Related
Jun 14, 2012
I am trying to animate a spline or jointed border object over an irregular surface.I want to add particles to the spline in the end to try to simulate a fire burning outward across a terrain.
I tried booleaning out a border and while that works, when I add particles to it, it overwhelms my computer. I tried using shapeMerge but that doesn't quite do what I want either. Itoo's glue plugin conforms an object to the terrain but doesn't allow me to animate it.
View 9 Replies
View Related
Oct 22, 2013
Im totally new to max. Im trying to draw a ship hull. I draw frames and placed in positions then i tried applying coss section modeifier and tried also to connect vertices manulay.
View 3 Replies
View Related
Jun 17, 2011
As you can see, the nature of my model forbids me from making a 3D solid using LOFT.
The top surface is consisted of 3D polyline and arc, which if "joined" will be become a spline.
The bottom surface can easily be joined into polyline.
If I loft the top and bottom, it'll only give me a LOFTED Surface, which is not I want (wanted a 3D solid).
View 3 Replies
View Related
Jun 27, 2013
I am trying to create a 3d surface by importing points from an excel file. I have been using "import points" in the 3d sketch mode, and checked off the box that says "create 3d spline." But this just causes Inventor to freeze and crash. My excel file had about 2000 points, all of which lie on the surface I want to create in Inventor.
Should this method work in theory, and do I just have too many points?
View 2 Replies
View Related
Dec 11, 2012
I have been using AutoCAD to create product designs (baby bottles) for the last three years. I am normally drawing lines, arcs and splines to create the shape, then I use PEDIT to create a closed polyline and REVOLVE to create a SOLID 3D object from that shape.
Couple days ago, AutoCAD is not longer creating 3D solids when I use REVOLVE as usual (even using older files and/or the same shapes or polylines that I have used before to create 3D solids). The result of REVOLVE is "SURFACE (REVOLVE)" (I got that from properties). But, the most uncommon thing is that AutoCAD is revolving fine one or two times per day after many many tries. (normally I am closing and opening files and trying to revolve some stuff many times, using the same process and suddenly it revolves the sahpe as a 3D solid)
I attached a picture showing two objects created using the same group of lines, splines and acrs. One is a solid 3d object and the other one is a surface (revolve) as result of using REVOLVE command. WHY????
View 3 Replies
View Related
Feb 21, 2013
Trying to us SURFPATCH to create a surface from a closed 3d poly (with SP1.1 applied)
The 3D poly on the left worked correctly, but when trying SURFPATCH on the right (axe head shape) the resulting surface id rectangular - why? looks like I will need to revert to EDGESURF - for now
View 2 Replies
View Related
Nov 3, 2013
I have model of an insect and I need to cut it into two pices as if plastic toy.
I drew a simple zig zag spline, extruded it, gave it shell for thickness and when I boolean substraction A-B i get 2 halves but without the cut walls- they appear empty. I need the cut to appear as if through a solid object.
Do I have to rebuild those cut walls by hand to make halves appear solid, or is there a faster way?
View 5 Replies
View Related
Dec 2, 2011
I often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
View 6 Replies
View Related
Oct 22, 2012
Has instances where you set your tolerance for the maximum triangle lenth to say 50m to reduce the amount of triangles along the edge that run at long distances. When I do this I end up with multiple surface holes and I'm not sure why as there are points in the area.
I thought well maybe it's because i should've reduced my max triangles first then added breaklines. Would this matter? I also thought I could add a line to the surface to fix the holes vs. deleting surface lines along the entire edge of a surface for many many miles.
View 9 Replies
View Related
Nov 14, 2012
I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
View 5 Replies
View Related
Dec 10, 2012
My goal is coming up with the volume bounded by the design surface and the existing surface. I don't have the design surface modeled yet.
Do i need to create alignment offsets?. Alignment 1 profile view is also attached. Then Alignment2.
What about starting with alignment1 profile view? Since I have created a polyline as the design profile ?
how do I shrink labels? Where is it in the settings ; the Align folder had been check.
View 2 Replies
View Related
Oct 2, 2012
I am issues with DEM files that I am downloading from the USGS website.I download 24k, elevation for the area I need. I then choose staged 1 second, add a surface to a blank drawing, then upload the DEM files to the surface.
The surface imports correcty, but when I try to import points taken by a surveyor on the same drawing, they plot incorrectly.The DEM surface and the points from the surveyor do not correspond. Also, the DEM surface is in meters, not feet. I have tried changing drawing settings, datum types, coordinate types, etc.
View 9 Replies
View Related
Apr 10, 2013
how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
View 9 Replies
View Related
Sep 2, 2013
I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies
View Related
Apr 4, 2012
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
View 1 Replies
View Related
Feb 28, 2013
I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
View 9 Replies
View Related
Jul 29, 2013
I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
View 6 Replies
View Related
May 31, 2012
It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
View 6 Replies
View Related
Dec 9, 2011
I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies
View Related
Aug 16, 2013
Autocad 2014.
I have the outline of a solid body guitar that I drew with spline, extruded and now trying put a 1/2" fillet radius along the edges, top and bottom.
Using the 3d fillet command produces an error, and extruding a profile along the edge path doesn't work either.
Attached is the spline outline, the red part is what needs the fillet, but the white part does not. However, they can't be extruded into a 3d solid unless their joined!
View 3 Replies
View Related
Dec 6, 2012
I am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Sep 15, 2013
I need to create a sub-set surface from my main surface. not sure what the vernacular is for a "subset surface" in c3d but i do have a feature line that bouinds the desired area, but that is as far as i can solve.
i did try creating a new surface - pasted the main surface in the edit definition, then deleted triangles until the boundary alighned wiht my featureline. This seemed to work, but when i view the properties of the smaller subset suface, it shows a mimum and maximum elevation that is incorrect.
View 3 Replies
View Related
Mar 1, 2013
Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
View 9 Replies
View Related
Mar 26, 2012
all of a sudden whenever I run audit on my corridor file the surface definition becomes a snapshot. To add to the drama, the corridor surface will not paste into an empty surface. Why?
View 2 Replies
View Related
Feb 7, 2013
My problem added with pic ... I want to make volume calculate for sample road project. When I try to compute materials I cant use Corridor surface for DATUM... There is only target surface on option..
View 2 Replies
View Related
