I am looking for a solution to create a watermark in AutoCAD DWG file:
Support AutoCAD 2010 to 2014.The watermark should be looks as a half-transparent background for the original DWG file.The watermark will not change when the drawings in the original DWG file is zoomed in/out.The watermark does not depend on an external picture file.When opening the DWG file, the user cannot remove the background watermark.
I have an Autocad drawing that I would like to take to a CNC machine to have it physically built out of extruded polystyrene. I do not want my drawing to be used without my permission or modified.
Is there a way to watermark it or to transform it to a read only file allowing the cnc machine to extract its parameters but not allowing any action upon the file (copy,modify et c.) ?
PS: I have started building my own DIY polystyrene cutting tool out of an old soldering pistol, piano wire,vice, clamps... but it will take some time before I finish building it and there is a chance I might mess up the first few shapes; I need the shapes as soon as possible.
I need to create a watermark on a drawing and can only find info about attaching a raster image and editing it to the properties to create watermark. Is there an easier way to do this that I am missing?
View 2 Replies View RelatedCan I create an FBX file in Inventor 2013? If so, how would I do that?
View 4 Replies View RelatedI want to know how to make my own hatch from design till puting it in (*.pat) file. for info, I know how can I download such file and upload it in AutoCAd among (CUSTOM) or (OTHER PREDEFINED) hatchs as wel, or make it by using (SUPER HATCH in express tools). But to creat PAT file that what I want to know.
View 2 Replies View Relatedcreate a 3D model using a .dxf file?
.dxf file contains 3D contour lines.
when importing it to Autocad 3D 2013 is shown as a colum instead of a 3D model.
I have Inventor Professional 2013 (student). I can't open new file, if I try to the program crashes and closes and try to send an error report. Can't install update/patch (DL20857064_32-bit.msp or inventor2013_sp1.1_x86.msp), says program not installed/or can't gain acces to the HKey. I have admin rights, I have tried re-activating, repairing, re-installing, uninstalling and reinstalling, to the point i had to request a new activation code but it's still not working.
I have attached a file with error messages and my system, which should be ok according to the system requirements.
I tried to create a 2d section of a 3d dwg file (imported from Revit)
It kept giving me a message "There are no solids or surfaces that can be projected."
What is the reason of it? It's a 3d dwg file exported from Revit.
Also, can you generate a 2d section thru the xref.
I'm having some difficulty with a new issue that is occuring:I have a 3D model that I'm attempting to render. It has rendered recently with no issues. Now, this morning, I get the following error message:
Unable to create output file - Make sure destination directory is writable and that the disk is not full. Rendering aborted.The drive is only approx. 30% full. I've closed/reopened the file to no avail.Also, I've closed/restarted ACAD.It always seems that AutoCAD acts goofy whenever I have a deadline.
-Inventor 2013 SP1.1 (Issue)
-Inventor 2011 SP2 (No Issue)
Templates have been coverted up from 2011, keeping copies of the old templates in separate folders all under the same parent directory.Have 2013 mapped to the folder with updated templates located on a network drive. Total of 18 temolates including the standard templates.
Computer specs:
Win 7 Pro 64bit Service Pack 1
Intel Core 2 Quad Q6700 @ 2.66GHz
8GB Ram
NVIDIA Quadro 2000
The Issue:I start Inventor 2013 or open an .ipt/.iam ect. I now want to create a new file so I click the "New" Icon.Inventor freezes for 10-15seconds and finally shows the templates.After that if you click on any of the templates it freezes instantly. Or if you scroll the browser bar down to navigate the folder. 15-35 seconds
After selecting the correct template it freezes for about 15 seconds.For those keeping track Thats 40-65 seconds just to open a drawing...
For Inventor 2011.Click, Click, Click. Open...Takes maybe 5 seconds.
I am a Mac user. When I go to create PDF's,each sheet comes out quite large. Can I create smaller PDF file sizes without loosing resolution?
View 3 Replies View RelatedI have no background with AutoCAD 2013, but my boss has given me the software and tasked me with taking entire floor plans of an individual floor .dwg and create smaller areas of each floor into separate, new .dwg's (like several rooms together) that then could be converted into .pdf's for sharing and/or printing. I have tried to find a simple tutorial or explaination of how to do this, but AutoCAD is such an amazing and complex tool that I'm having trouble with the terminology even.
I was right-clicking on the 'Model' tab to create a 'New Layout', right-clicking that to get to 'Page Set-Up Manager' and 'Modifying that to select 11 x 17, Landscape, and 'Adobe PDF' in the Printer dialog box. When I worked in the new Layout window sometimes I could zoom in to a section of the floorplan and then go to 'A' button in the upper left corner and select 'Print' and sometimes the resulting .PDF file would be that smaller section, and sometimes it would still just be the whole floorplan.
Im trying to create a watermark action set. I have my watermark made and set to 30% for this particular set of images. When I paste the watermark on an image it comes into the new image at 100%. How do I get the opacity to remain consistant from document to document?
View 2 Replies View RelatedHow do you create a watermark in Paintshop pro x3 that you can use over and over for multiple photos? I've read some articles out there but it seems it's just specific to a photo itself, is there a way to create one and which settings should be used so once it gets added to a photo, it's seamless. Do you create a new image? if so, what is the preset, characteristics and so on? Here is one article I've read: [URL] ...
View 5 Replies View RelatedHow do I make a white signature watermark? The one I made was dark. I need a white one, but I cannot see where the white one is on the transparant checkerboard.
View 11 Replies View RelatedSo, Im trying to create a brush to watermark my photographs, but the 'define brush preset' isnt clickable, but it is clickable with any other photo i try it with.
View 3 Replies View RelatedI want to apply geographic map over another image but to look like water stamp over the image. How can I create such effect with photoshop or some plugin is aveilable.
View 9 Replies View RelatedI am looking to create a signature/watermark so that i can add to all my photos, basically just my name to b added at the bottom corner of the photo.
How do i make a signature so it can be saved then added to each individual photo when needed?
How do I create a watermark in Photoshop Elements Editor 10 on a Mac?
View 1 Replies View RelatedHow do I create a beveled watermark in the new Elements 11?
View 3 Replies View RelatedHow does one create a watermark that can be placed outside the image? There will be a strike line surrounding the image and the watermark was requested to be placed outside that line. I started in Lightroom then progressed to Elements 10 looking for a way to do it.
View 1 Replies View RelatedI would like to add a hidden watermark to my photos, but not sure how to do so. I did find a tutorial of how to make the watermark in GIMP, but it was written using an old version of GIMP. I have the current 2.8 version.
View 6 Replies View RelatedI'm trying to create an action to put a watermark and gold frame on photos (Photoshop CS6). I will need to add it to many photos at a time (100+) so plan to add it to a folder using automate, batch. I've created the action and when I use it on another image to test it the frame doesn't fit, it's really blown up and warped. The two images are the same size, neither have been cropped at all, I used the same camera, same lens, everything is the same, so why doesn't it fit?
I'm guessing it's something to do with the size of the gold frame image as the actual watermark is fine, but I'm a bit confused, it's as if the two images are different sizes or one has been cropped, but this isn't the case.
P.S The photos are just to test the action, I'm not actually giving a gold frame to the wedding photos!
I am trying to create a visible watermark to apply to pictures. How to create one to use in Paintshop Pro X4 Ultimate? I know how to apply one but I'm uncertain on how to make the actual watermark.
View 5 Replies View RelatedI have Lightroom 3 and using Windows 7.
I have a watermark created that I use when I export images using "File > Export with Preset". The watermark is rendered when I export to a TIFF or PSD file. It is not rendered when I export to a JPG file. How I can have a Watermark added to an exported JPG file?
Is it possible to watermark my images with their filenames in Lightroom 5?
View 2 Replies View RelatedI have a 30 second .avi file, frame size 1440 x 1080 15 frames/sec Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I can play the video OK in vlc and when I insert the video into the timeline of VS X3 and play the inserted .avi.
As soon as I insert:
1. a .jpg at the start of the timeline with text and/or,
2. text (as a watermark) on bottom left hand side for the 30 second duration
whenever I play back (in VS X3 preview) this clip, the movie plays (but with a frozen first frame from the .avi) with only the audio with the text.
I have been using VS X2 successfully on my Windows 7 64-bit PC.I had purchased X3 sometime ago and decided to install my X3 version.
Anytime I try to export a file and add a watermark, Lightroom crashes. I can export without adding a watermark just fine. Lightroom also crashes when I try to edit a current watermark - as soon as I click the drop down menu to choose which watermark to edit, down goes Lightroom. I have both text watermarks and a small jpeg as a watermark (same thing happens with both) and I am running Lightroom 4.3.
View 9 Replies View Relateddeleting watermarks from Lightroom 4. I had a bunch of watermarks that I had created in LR4 that was a result of trying to redo a previously created watermark (why Adobe don't allow you to overwrite I don't know) but instead of overwriting the currently selected watermark LR4 lets you create a new preset from the changes. These changes build up over time and you sometimes end up with missing or moved files. If these graphic files are missing then you may or may not have ran into my dilema where when you select the watermark to try and delete it, the dialog box just keeps disappearing and nothing you do seem to work. Don't dispear, here is a solution I've discovered that I couldn't find anywhere else.
1. Open LR4 (Not sure if this works with other versions)
2. Select the Print module (this seem to be the fastest, easiest way to access and edit watermarks)
3. Select the check box next to the watermark under the "Page" pane on the right (this will allow you to select and edit the individual watermarks)
4. select the dropdown menu and chose the watermark that you want to edit. The dialog bot will open but beware it will quickly vanish in a couple seconds so here is my solution (at least until Adobe fixes this problem). Grab hold of the dialog box before it closes and hold it for a few seconds, this will delay or stop it from closing instantaneously.
5. Select the dropdown menu within the dialog box and chose delete watermark option, confirm that you want to delete and voila!
I would like to resize and watermark all of the image in a particular file. I understand that I can do this with Lightroom, but I do now know how.
View 1 Replies View RelatedI would like the file number text to show up on some of my exported JPG images. I need this for the purpose of looking up the original file. All I see in the watermark section is the ability to hard code text only. Is there a way to do this inside LR? Perhaps a plugin?
Alternately, is there 3rd party utility to do this to a whole folder of exported JPGs? That would be messy, but I really need to ID certain event photos ON the photo.