VideoStudio :: X3 - Adding Watermark (text Or Image) To AVI File?
Mar 23, 2012
I have a 30 second .avi file, frame size 1440 x 1080 15 frames/sec Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I can play the video OK in vlc and when I insert the video into the timeline of VS X3 and play the inserted .avi.
As soon as I insert:
1. a .jpg at the start of the timeline with text and/or,
2. text (as a watermark) on bottom left hand side for the 30 second duration
whenever I play back (in VS X3 preview) this clip, the movie plays (but with a frozen first frame from the .avi) with only the audio with the text.
I have been using VS X2 successfully on my Windows 7 64-bit PC.I had purchased X3 sometime ago and decided to install my X3 version.
View 1 Replies
ADVERTISEMENT
Mar 14, 2013
Anytime I try to export a file and add a watermark, Lightroom crashes. I can export without adding a watermark just fine. Lightroom also crashes when I try to edit a current watermark - as soon as I click the drop down menu to choose which watermark to edit, down goes Lightroom. I have both text watermarks and a small jpeg as a watermark (same thing happens with both) and I am running Lightroom 4.3.
View 9 Replies
View Related
Jun 3, 2013
I would like the file number text to show up on some of my exported JPG images. I need this for the purpose of looking up the original file. All I see in the watermark section is the ability to hard code text only. Is there a way to do this inside LR? Perhaps a plugin?
Alternately, is there 3rd party utility to do this to a whole folder of exported JPGs? That would be messy, but I really need to ID certain event photos ON the photo.
View 4 Replies
View Related
Mar 26, 2011
I would like to add in the right down corner, the file name of the picture.... I did it in the past under Picture Lab but I do not know how to do it under VideoStudio... Is it possible ?
View 2 Replies
View Related
Jun 10, 2006
I recently did a concert and I would like to know how to add my watermark to several photos at once rather that creating the watermark for every sigle photo every time.
View 8 Replies
View Related
Jun 13, 2011
How I can add an edited audio file to a MP4 video file? The problem is that the MP4 video already has audio files included with the import. I want to change those file and add the edited files. It seems that I can't delete or cut the audio files out of the video clip to add the edited version. By the way I am using Corel Video Studio Pro X3
View 1 Replies
View Related
Mar 5, 2013
I'm a photographer, and I would like to add a small watermark to photographs I publish online. So that people would find my name and website. I know how to add a watermark to a single image, but I was wondering if there is any way to add the same watermark to multiple images in one operation. This can be done in PS so I was hoping that there is also a way with Paint.NET.
View 5 Replies
View Related
Feb 16, 2013
I have a watermark i want to add to my photos in elements 10.how do i do this?
View 39 Replies
View Related
Dec 19, 2012
I recently purchased Lightroom 4 and I am having issues adding a watermark to my JPEG images!
I'm using a very basic Ariel Black text, medium size and very clear. The watermark appears fine in the photo preview but does not show up when exported to my Lightroom library file! If I export to a TIFF image it's fine but just not in JPEG.
View 4 Replies
View Related
Jul 18, 2013
I'm using Corel videostudio X6 and I have 2 problems.
1. when i go in to track/customize motion mode, the window is bigger than the screen so i can't use this option (i'm using lap top wide screen). like in here: [URL] ....
2. when i'm adding a text to low quality video the text doesn't look well and i wonder how can i maintain the quality of the text?
View 1 Replies
View Related
May 2, 2013
I'm trying add a watermark to approx. 8,000 images by batching the process. However, it only does about 400. The 2 errors that are logged are:
Could not complete your request because of a program error. (-1)
Could not complete the command because the selected area is empty. (-25570)
Here's a screenshot of the action that I'm using:[URL]...
View 12 Replies
View Related
Apr 25, 2011
how to add watermark to images from command line.
I downloaded watermark.scm and watermark-it.scm, but cold not find how to invoke it in any of the forums ...
I am looking for something like:
gimp -i -b '(watermark "soureImage.jpg" "watermark.jpg" opacity)' -b '(gimp-quit 0)'
or similar combinations. I tried many combinations but always get:
batch command experienced an execution error
View 1 Replies
View Related
Mar 10, 2009
adding text to an image. I have followed the instructions in both books and videos on how to add text (using the text tool) and when I get to the point of typing text in, it doesn't go 'in'. The box that I assume it should show up in just stares at me - blank.
View 12 Replies
View Related
May 3, 2009
how I can take an image, and have it only showing in a text.
View 4 Replies
View Related
Jul 10, 2006
I have a photo that I'd like to add text to. The text is very simple, and I would like it in the upper left corner of the image. If someone could be so kind as to maybe work the image if they were so inclined, and then maybe explain how it was done.
I've tried simply using the text tool, but for starters, the text isn't displayed properly. For example, when I typed an "F," the displayed text was a, "?." Sounds like a font issue, I tried all the fonts, they all display a "?."
Second, I know I need to make a new layer for the text to be added to the image, but I'm not sure how to go about doing this. I'm not sure what kind of layer to open for it, and I'm not sure how to blend the layers once I do. I also want the beginning letter to be one font, and the following three to be another. For example, the beginning letter to be a cursive lowercase, large font "f," while the other letters are arial font lowercase, smaller font, "ine." With the period included in the text. This isn't what I want the text to read, but it should help you guys that choose to help come up with something.
On a side note, I'd love to take those trees out of the pic. Would you guys recommend matching the color of the sky and brushing over, or is there another way that might be better. I'd like this pic to be as clean as possible.
View 7 Replies
View Related
Aug 2, 2012
I have a logo watermark x 2 which I need to add to a number of pictures, is there a way I can do this in one go or without manual input. I aware of the function that allows a text watermark to placed on an image while processing multiple pictures. I am elements 9 user.
View 5 Replies
View Related
Jul 14, 2009
I am trying to add a simple text layer to some relatively small JPEG files - each file is only about 3 or 4 MB in size before any editing or additions are made to the files. I am using P-shop CS2 on a PC with Windows XP SP2.When I add a few lines of simple text (with no special effects) to any of these files and attempt to save the edited file as a .TIFF or .PSD file with the text as its own layer in the file - the resulting .TIFF or .PSD file is a 30 or 35 MB file which is hard to work with because of its size. These files have only two layers in them - the text layer and the base image. It just does not seem logical that a simple text layer would make a file increase in size by 10 times.
I would like to try to save the edited image files as .TIFF or .PSD so that I can go back and make future edits to the text layer.I have tried to save the edited file with the text layer as a .zip file but these files are also still very large - 20 MB or so.Maybe I have some basic file settings wrong that are making the files so large? Does anyone have any suggestions on how I can add a simple text layer to a relatively small image file, save it as a .TIFF or .PSD file and keep the resulting file size manageable?
View 7 Replies
View Related
May 5, 2013
I know how to create text with a background picture inside the text. I want to put this text onto another image. So the text with the background inside the letters, will be superimposed on new image.
View 3 Replies
View Related
Nov 4, 2013
I am trying to make a montage/collage for my sister's birthday and have the background image and the other images all sorted.
What I would like to do now is add text saying 'Happy Birthday' into the main image, so that it looks as though it is part of the background.
I'd like it to sink into the background or be embossed and take on the colors of said background too, if possible.
View 6 Replies
View Related
Nov 10, 2011
I have an image created and saved to an xcf file. The image is a text logo. Each layer is a different text word. How can bring in an image to place next to my yext? Can I open a new layer and import(or copy/paste) an image into that layer?
View 1 Replies
View Related
Jun 22, 2012
I have an excel list of about 2000 names. I need to add each name text to a image I created and then have it saved as a separate file. Is there any kind of automation/shortcut to do something like this, rather then manaully typing each name?
View 2 Replies
View Related
Sep 27, 2011
I'm building a site with WordPress and installed a plugin that will create a slider of images on the front page. For each image, there is specific text that goes with the image (just a simple quote). If it's possible to use Gimp to add text to the side of an image and not actually on the image?
Here's a link to the front page of the site that I'm attempting to add the text to. Currently, the photos are there and you will see the blank space next to the images. This blank space is where I would like to add the text. I've contacted the creator of the plugin and there is no way of doing this from within the plugin, itself.
[URL]......
View 1 Replies
View Related
Apr 5, 2013
I have created a banner for a website in Photoshop. On the right side of the banner I want to have a flash file I created with transitioning imaging. I also use Dreamweaver but the banner is such that I cannot add it together in dreamweaver , or at least I haven't figured out how.
The best way I would like to do it is in Photoshop but will the Photoshop image allow the swf file to play? I tried to create a gif in Photoshop but that doesn't play like I would like. I am only using three images 330 px by 248 px so it isn't huge.
View 2 Replies
View Related
Nov 5, 2012
I am using Elements 6.0. I want to fade my image to white on the right side of the image. That way I can add text there in the plain white space. I've seen several ways to do this, but none seem to work on 6.0. using 6.0 . I tried a few ways explained on higher versions but I can get it to work.
View 2 Replies
View Related
Apr 8, 2008
inserting or adding an image to the drawing file.. i ve the reference point and the bmp file path.. but the error "Run-time error '-2147467259(80004005) Method 'Add' of object '_IRxSketchImages' failed" is flashed.
View 6 Replies
View Related
Dec 18, 2012
Ever since the latest update to PS CS6, when I add a simple effect to a text layer, like emboss, the working image disappears when I zoom in and out. Also, the layer effect does nothing to the type. It's almost like a dispay issue. When I turn the layer effect off, my image is visible again.
View 1 Replies
View Related
Jul 19, 2012
I have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
View 18 Replies
View Related
Oct 6, 2010
I'm trying to remove a watermark in an old movie made of my son in high school (about 8 yrs old), by a friend of his. It's right in the middle of the screen in bright red. They didn't care about it back then as it allowed them to format their movie online. Before I put this very short clip in my memorial video I want to clear that out. Don't know what original software was used. My son's friend can't remember either. Does Videostudio have a way to fix this?
View 2 Replies
View Related
Dec 3, 2011
i wanna write text but make it behind the overlay image track , how can i do that ? every time i write text it comes in front of the image.
I'm using X4 version.
View 1 Replies
View Related
Feb 27, 2008
Please let me know how to achieve this text watermark effect for an image.
I have included an example of exactly how I would like it to look.
Also, it is important for me to know how to automatically put the watermarked text in the exact centre of the image.
I will be doing this for more than a hundred images, so putting the text in the centre of every image is important for me.
View 1 Replies
View Related
Feb 28, 2008
I am really bad at Photoshop but willing to learn. Please let me know how to achieve this text watermark effect for an image. I have included an example of exactly how I would like it to look.
Also, it is important for me to know how to automatically put the watermarked text in the exact centre of the image. I will be doing this for more than a hundred images, so putting the text in the centre of every image is important for me.
View 2 Replies
View Related
