I tried to create a 2d section of a 3d dwg file (imported from Revit)
It kept giving me a message "There are no solids or surfaces that can be projected."
What is the reason of it? It's a 3d dwg file exported from Revit.
Also, can you generate a 2d section thru the xref.
If you can create a solid by lofting between two section, in this case they are 3d polylines, along a given path. The path is at the top of the sections. Using the loft command I have to key in the PO ( point ) option several times to get the path option to show then when I select the path it gets treated as another section. See attached.
View 8 Replies View RelatedI have autocad 2014 and cannot find the section panel shown in the picture below. I need it as I am trying to create 2d images from point clouds.
View 9 Replies View RelatedI'm in the process of creating an exploded view of an assembly. I'm having to do this in a presentation file, and I was wondering if it was possible to section one of the parts in the exploded view. To be more specific, I have the majority of my parts spread out around another assembly in the center of the page. I want to get a three quarter section view of the center assembly so the internals are visible. Is this possble from within a presentation file and if so, how can it be done?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
So, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us. so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.
View 6 Replies View RelatedCan I create an FBX file in Inventor 2013? If so, how would I do that?
View 4 Replies View RelatedI want to know how to make my own hatch from design till puting it in (*.pat) file. for info, I know how can I download such file and upload it in AutoCAd among (CUSTOM) or (OTHER PREDEFINED) hatchs as wel, or make it by using (SUPER HATCH in express tools). But to creat PAT file that what I want to know.
View 2 Replies View RelatedI am looking for a solution to create a watermark in AutoCAD DWG file:
Support AutoCAD 2010 to 2014.The watermark should be looks as a half-transparent background for the original DWG file.The watermark will not change when the drawings in the original DWG file is zoomed in/out.The watermark does not depend on an external picture file.When opening the DWG file, the user cannot remove the background watermark.
create a 3D model using a .dxf file?
.dxf file contains 3D contour lines.
when importing it to Autocad 3D 2013 is shown as a colum instead of a 3D model.
I have Inventor Professional 2013 (student). I can't open new file, if I try to the program crashes and closes and try to send an error report. Can't install update/patch (DL20857064_32-bit.msp or inventor2013_sp1.1_x86.msp), says program not installed/or can't gain acces to the HKey. I have admin rights, I have tried re-activating, repairing, re-installing, uninstalling and reinstalling, to the point i had to request a new activation code but it's still not working.
I have attached a file with error messages and my system, which should be ok according to the system requirements.
I'm having some difficulty with a new issue that is occuring:I have a 3D model that I'm attempting to render. It has rendered recently with no issues. Now, this morning, I get the following error message:
Unable to create output file - Make sure destination directory is writable and that the disk is not full. Rendering aborted.The drive is only approx. 30% full. I've closed/reopened the file to no avail.Also, I've closed/restarted ACAD.It always seems that AutoCAD acts goofy whenever I have a deadline.
-Inventor 2013 SP1.1 (Issue)
-Inventor 2011 SP2 (No Issue)
Templates have been coverted up from 2011, keeping copies of the old templates in separate folders all under the same parent directory.Have 2013 mapped to the folder with updated templates located on a network drive. Total of 18 temolates including the standard templates.
Computer specs:
Win 7 Pro 64bit Service Pack 1
Intel Core 2 Quad Q6700 @ 2.66GHz
8GB Ram
NVIDIA Quadro 2000
The Issue:I start Inventor 2013 or open an .ipt/.iam ect. I now want to create a new file so I click the "New" Icon.Inventor freezes for 10-15seconds and finally shows the templates.After that if you click on any of the templates it freezes instantly. Or if you scroll the browser bar down to navigate the folder. 15-35 seconds
After selecting the correct template it freezes for about 15 seconds.For those keeping track Thats 40-65 seconds just to open a drawing...
For Inventor 2011.Click, Click, Click. Open...Takes maybe 5 seconds.
I am a Mac user. When I go to create PDF's,each sheet comes out quite large. Can I create smaller PDF file sizes without loosing resolution?
View 3 Replies View RelatedI have no background with AutoCAD 2013, but my boss has given me the software and tasked me with taking entire floor plans of an individual floor .dwg and create smaller areas of each floor into separate, new .dwg's (like several rooms together) that then could be converted into .pdf's for sharing and/or printing. I have tried to find a simple tutorial or explaination of how to do this, but AutoCAD is such an amazing and complex tool that I'm having trouble with the terminology even.
I was right-clicking on the 'Model' tab to create a 'New Layout', right-clicking that to get to 'Page Set-Up Manager' and 'Modifying that to select 11 x 17, Landscape, and 'Adobe PDF' in the Printer dialog box. When I worked in the new Layout window sometimes I could zoom in to a section of the floorplan and then go to 'A' button in the upper left corner and select 'Print' and sometimes the resulting .PDF file would be that smaller section, and sometimes it would still just be the whole floorplan.
section i created in autocad doec not shows the aec objects i have copied from autocad architecture. i don't know whats the reason. is there some way to creat section of aec objects in autocad?
View 1 Replies View RelatedI can create pond quick profile,but it can not be saved.
if I press the section view command ,it tells me no alignment .you know ,I only create pond without any alignment .I only created pond by grading .so I don't know how to create pond section.
I have a 3d model of a bridge and I would like to cut transverse sections at every pier but would like to get linework just at the spot to create plans and would like for it to be linked so if you update pier it will update section? Is this possible or something very close? Let me know what are the best ways to do this.
View 1 Replies View RelatedAutoCAD MEP 2013. Having a repeated crash when creating a 2D section view. Works great up until I place the 2D section and then crashes. I have tried using sections from Electrical and Arch palletes but same thing. I've used this tool thousands of times on other versions but this is the first time with 2013.
View 2 Replies View Relatedprovide a sample of a building (section) tag?
I'm looking for something with an adjustable/stretchable section marker if that makes any sense...
When I create multi sect views they plot 3 rows from left to right shown below:
0+00 1+00 2+00
I would like it to plot from bottom to top like shown below
2+00 5+00
1+00 4+00
0+00 3+00
Is there somewhere to adjust the settings?
I am trying to create some cross section reports. But I have noticed that none of the options available (Section Point Report, or any of the ones that use Sample Lines) will show any featureline information if it is not part of the region which is attached to the alignment chosen in the report.
For instance, I prefer to create my splitter islands as a seperate baseline (levels taken from a dummy surface) and add a simple kerb assembly to this. (So both are in the same corridor). My normal visual cross sections show the splitter island kerbs without issue. But the cross section reports do not.
I have a similar problem with some of the footways, which are created on a separate baseline. (I am working on car parks, where the footway surrounds the car park. So it is easier to create the footways seperately). The section reports do not pick up the footways, presumably because it belongs to a different baseline.......
I dont understand why a section report cant simply pick up any featureline it crosses??
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
how to create an helix with variable section?. The axis diameter is constant.
View 3 Replies View RelatedI try to create existing road cross section in civil3d only with offset and elevation.
View 4 Replies View RelatedI have been working on a detailed section drawing in AutoCad 2013
I saved the file in different files as i gone along, I have been trying to open the file everytime i do all the layers are there but only two are visible all the other seem to be invissible.
I tried it with each file on different computers, same version of AutoCad no success.
It apears that in the preview before opening the file it is all there but when actually opening the file its only a random two layers that come up, missing around 10 others which have the majority of the drawing /details on there.
I tried the unhide, changing line weights in the layer menu, opening the back ups. is there anything else I can try.
Is there any way to get the VIEWBASE command to respect the layer settings when creating section views?
It keep clarity, our plot styles are already setup, and IMO, more logical.
i have a series of points from a cross section taken using an adcp and i am trying to draw the cross section in autoCAD lt 2014. is there a way i can enter the points as a sort of script so i dont have to manually typoe in the distance and height between each point as i have about 200 points in each cross section.
View 6 Replies View RelatedWhen using Layout/baseview/section tool, you end up with paper space views of the model so that when you go to dimension the view, you get the paper dimension, not the model dimension. How can I change this behavior?
View 4 Replies View RelatedI loaded autocad R2013 and went into the .cui dialog box to look for the screen menu section. It used to be under the legacy portion but it's no longer there. I've been looking all around to try and find where it's at.
View 4 Replies View RelatedIs there any tool in AutoCAD 2014 to obtain broken section view (generated from a base view in a layout?I have some very long section views and just can't find a way to shorten them...
View 2 Replies View RelatedIs there any external application for creating a section box for autocad? If i use the live section it applies only to solids. Is there any option or an external add on so i can apply to points lines polylines civil 3d object and in general to every object?
View 8 Replies View Related
