AutoCAD 2013 :: Application Plugins Folder Must Be A Bundle?
Mar 29, 2012
Concerning the folder "ApplicationPlugins" found in C: Program File > Autodesk > ApplicationPlugins:
With AutoCAD 2012 I could dump my LISP routines that I use a lot and they would be auto-loaded in any drawing that I opened. I loved it....
With 2013, I try the same thing and it doesn't work. And from what I have been reading, I have to make a folder sturcture with the suffix ".bundle" and create an .xml file in order for these to run....
The ability of the ApplicationPlugins folder from 2012 was awesome.Is there a way to make 2013 act like 2012 for this folder?I have checked my variables and they are set the same as 2012:
APPAUTOLOAD = 14
I have also ran the command APPAUTOLOADER and selected the "Reload" option and then Listed what applications it sees in the possible folders and it only recognizes folders that are .bundle folders AutoCAD Tips Blog
View 3 Replies
ADVERTISEMENT
Aug 25, 2011
I'm trying to get the autoloader working. [URL] .....
Looks like it's a 'fairly' new addition and dead simple but..
All I need to do is add a single resource folder in the bundle and to the xml file to be able to access the files in the dll.
How to modify the xml file and refer to this folder in the dll?
<?xml version="1.0" encoding="utf-8" ?><ApplicationPackage SchemaVersion="1.0" > <Components> <ComponentEntry AppName="DOTNETTEST2" ModuleName="./Contents/AutoloaderDotNetSample2.dll" LoadOnCommandInvocation="True" > <Commands GroupName="DevDays2010"> <Command Global="DOTNETTEST2" Local="DOTNETTEST2" /> </Commands> </ComponentEntry> </Components></ApplicationPackage>
I can't remember where I got the resource files from.
Here is the DevCast for creating the installer. [URL] ....
Also is there a way to change the path depending on whether or not you are debugging?
In VB6 I used a function
Public Function IsIDE() As Boolean 'Returns boolean value of True if not compiled IsIDE = (App.LogMode = 0)End Function
View 6 Replies
View Related
Apr 7, 2004
my photoshop 7 is missing this my lil bro deleted it on accident and i dont have any plugins?
View 1 Replies
View Related
Jul 28, 2013
Why on earth would Adobe remove the ability to point to a folder for additional plug-ins? I'm sure they will have lots of good reasons. However, the standard folder is embedded in the AppData folder in Windows. That folder resides on the system (C:) drive. I always install Plugs in a folder on a separate drive on my system (D:) so as to make it easy to manage and navigate.
View 2 Replies
View Related
Dec 8, 2008
makes upgrades/re-installations smoother and it is very simple to disable them for troubleshooting. If you disable the selection of the dedicated folder, you can compare performance. IF that solves your problem you can tilde them all out and re-enable them one by one to find the specific conflict.
View 1 Replies
View Related
Jul 2, 2012
I have CS3 and finally I can update to CS6. I have this plugins
AV Bros Puzzle Pro 3.0
L'amico Perry - Luce
Nik Software (Color Efect Pro 3.0 Complete - Dfine 2.0 - Sharpener Pro 3.0 - Silver Efex Pro - Viveza)
Redfield (arround 15)
Topaz Labs (Adjust - Clean - DeNoise - Detail - Remask - Simplify)
I have a problem with CS3 since many time ago[URL]...But I have one question: If I backup the folder plugins, I really can use it with CS6 before I install it?
View 4 Replies
View Related
Nov 26, 2012
I copied my PS CS5 Plug Ins folder into my CS6 one & it started having problems opening & errors... what the basic/original ones should be in PS CS^6 Plug In folder?
View 6 Replies
View Related
Sep 2, 2013
I just got my student/teacher copy of CC. In PS, under preferences for plugins, there is no option to allow me to direct to an alternate folder for plugins. Am I missing something? It says it's up to date, but no matter what I do I can not get any plugins to show. No matter what folder I put them in.
View 3 Replies
View Related
Mar 2, 2014
I installed my Afterfx and Premiere in "D:program filesAdobe", and MBLooks plugin, it was installed in the folder "D:Program FilesAdobeCommonPlug-ins7.0MediaCore" automatically, but it was not loaded by Afterfx and Premiere, then I move the plugin to "C:Program FilesAdobeCommonPlug-ins7.0MediaCore", it's loaded.
View 3 Replies
View Related
Jun 18, 2013
After upgrading I realized I am missing some external plugins I had installed.
Those I am missing are ones that I had in an external folder that you could set in preferences. The ability to set an Additional Plugin Folder is gone. Can I set an external plugin folder?
View 2 Replies
View Related
Mar 1, 2013
When I add an addtional plugin using preferences-plugins in CS6 the plugin shows up in cs6 but my active tools will pulsate or vibrate around when I try to use them. If I uncheck the preferences-plugins- additoonal plugins and reboot the pulsating of the tools ceases. Any way to stop the pulsating tools?
View 1 Replies
View Related
Jul 26, 2013
Few days ago when I installed PS CC and worked with it that error did not appear. Why now? What does it means? The only updates installed on my computer since installing PS were those related to Adobe applications: PS, Illustrator, InDesign.I am on MAC with OS X 10.8.4. The same license and installation is on my second computer. That error do not appear.
View 1 Replies
View Related
Apr 19, 2013
Autocad will not start. No error return. Check in Task Manager ACAD.exe start and disappear immediately.
Tried:
Repair Application - same problem
Uninstall AutoCAD and delete registry and reinstall - same problem
Log in using other ID and repeat above still same problem
Uninstall, delete all AutoDesk folder in Program file and ProgramData and reinstall all AutoDesk product (AutoCAD and NavisWork)
Problem still same.,
No problem with NavisWork only AutoCAD
Check in Event Viewer:
Faulting application name: acad.exe, version: 25.0.114.0, time stamp: 0x503d96a9
Faulting module name: accore.dll, version: 19.0.114.0, time stamp: 0x503d97d9
Exception 0xc0000005
Fault offset: 0x000000000000fab0
Faulting process id: 0x144c
Faulting application start time: 0x01ce29119179dada
Faulting application path: C:\Program Files\Autodesk\AutoCAD 2013\acad.exe
Faulting module path: C:\Program Files\Autodesk\AutoCAD 2013\accore.dll
Report Id: cf370f5a-9504-11e2-a365-14feb5f140a6
System is Windows 7 Enterprise 64 bit
View 3 Replies
View Related
Jan 19, 2013
All of a sudden I got this window when starting AutoCAD:"AutoCAD Application has Stopped working..A problem caused the program to stop working correctly.Windows will close the program and notify you if a solution is available."
I'm using v2013 on a desktop with Windows 8..I have been using the program since I got this new system in November without a hitch On sunday I had a nasty virus -Today I had to uninstalled AutoCAD and re-installed it and it worked good.After I closed it and went to open the application again I got the MESSAGE again
View 9 Replies
View Related
Feb 14, 2013
I'm looking for a way to tag entities (for example arc) in a DXF with an numeric ID of my choosing. I've been trying to understand the DXF reference and find examples of how to do it, but there is not much information available. My interpretation of the standard is that I'm allowed to do this:
0
ARC
8
Layer1
10
-1.734315
20
-1.975000
40
0.300000
50
225.000027
51
270.000065
102
{MYAPPLICATION
2000
13
102
}
Where 2000 is my application defined code and 13 is my numeric ID value. Is this correct use of application defined codes?
View 4 Replies
View Related
May 17, 2012
I've recently installed IV 2013 on my PC and when I attempt to import my 2011 Application Options over, they do no apply.
View 2 Replies
View Related
Oct 23, 2013
Is there any external application for creating a section box for autocad? If i use the live section it applies only to solids. Is there any option or an external add on so i can apply to points lines polylines civil 3d object and in general to every object?
View 8 Replies
View Related
Sep 3, 2004
In Cable and Wire harness in AIP is there a way I can extract or dimension abundle diameter that is associative with the model? I was expecting that Ican dimension the diameter sizes in the nailboard drawing.
View 2 Replies
View Related
Feb 20, 2013
In the process of cretaing an installer for a RealDWG based web application(VS2010 web setup project). The intended target environments for now will be win server 2003 and win 7. They will be fairly clean in the sense that no other autodesk or realdwg based products are installed or is planned to be installed.
The tips and techniques chapter of the RealDWG documentation have a section of how to create an installer and it says that all merge modules from the Redistrib folder should be added to the installer.
However the Redistribution requirements chapter mentions that for Shapemager functionality either a couple of merge modules should be included (for read/write support) or a couple of other merge modules should be included(read only support).
I've tried to only include the mergemodules that are listed as required but that did not work when I tried to run the deplyed app. (acdbmgd.dll missed several dependencies to other dll's that were not listed as required). When trying to include everything I get errors when doing a validation of the msi in Orca(probably originating from the shapemanager mergemodules).
View 1 Replies
View Related
Apr 27, 2013
When I start the subject application, I experience delay in opening the program & error as attached appars on sreen.
View 1 Replies
View Related
Sep 6, 2012
I'm trying to install the latest Inventor View on all of the computers at work and keep getting this error. The program installs fine, opens fine, but I can't set it as a default program to open .IDW, .IPT, and .IAM files. When I do I end up with the error "not a valid win32 application".
The computers are running the 32-bit version of XP, and Inventor View 2012 works fine on all of them (after doing the DtDv install trick).
Also, while we are talking about Inventor View, is there ANY reason at all why it isn't combined with TrueView??? Seems like such a hassle to have two programs doing basically the same thing, with TrueView being MUCH more functional.
View 4 Replies
View Related
Jun 21, 2012
Does Autodesk Simulation Mechanical bundle with any of the Inventor packages?
View 1 Replies
View Related
Feb 16, 2013
I'm trying to export Revit into Navisworks Simulate but there's no Navisworks tool in External tools. I did a full install of the Design Suite and checked Control Panel/ Programs/ Programs and Features for " autodesk navisworks simulate 2013 exporter plugins" but they're not installed. Are the plugins included in the Suite or do I download them from Autodesk?
View 2 Replies
View Related
Jun 5, 2013
We are using .cuix file which gives access to tools in custom .arx file in AutoCAD 2012/2013. We load the menu using the .bundle mechanism and the plug-in - using button from the menu. If the user is Administrator (or executes AutoCAD as Administrator) the menu, toolbars and ribbons are loaded correctly and the user can load and unload the application (lisp function in .mnl file is used for that), but if the user is not an administrator either the menu, toolbars and ribbons are not correctly loaded or they are loaded, but the user can not load the application.
We have found that a probable cause for this behaviour is that AutoCAD tries to create/renew the .mnr file when first loading a .cuix file and since the user has no administrator rights this can't be done in the "C:Program FilesAutodeskApplicationPlugins" folder where the bundle is and AutoCAD creates the .mnr file in its own support folder ("C:Users<User>AppDataRoamingAutodeskAutoCAD 2012R18.2...Support") together with a copy of the .cuix file and changes the path for loading the .cuix file to this location. Since the .mnl file containing the function for loading/unloading is not copied with the .cuix file the application can not be loaded.
The user has to delete the created files under the support path of AutoCAD, unload the .cuix file and then reload it from the correct location to resolve the problem. Restarting AutoCAD leads to the same problem.
Is there a way to prevent this behavior other then running AutoCAD as administrator (that is not always an option)?
View 3 Replies
View Related
Dec 2, 2012
My autocad 2013 can't open any of my folder. When I try to open one, nothing happen and it the default drawing that stays there.
View 4 Replies
View Related
Apr 6, 2014
I had subsctibed to the single program verion of CC early last year and purchased LR5 as soon as it was available, long before the Photography Bundle was introduced. Now I have no need for LR5 licence. Is there a way to unregister the program and have everything under CC? I have no need to install on 4 machines. Possibly transfer the LR licence?
View 2 Replies
View Related
Aug 29, 2012
When I select tools>Autolisp>Load Application from the menu, the default folder it shows is a random folder (same one every time) and I have to navigate to where my lisp routines are. In 2012, it opens up directly to my lisp folder. The command it is executing in both circumstances is "appload". Or how to select a default folder?
View 9 Replies
View Related
May 28, 2013
We are copying our original files to a sub folder to make revisions that have only happened after bidding. We want to keep our original bid documents intact. I have created a sub folder called 'Confirmed Documents' and added Constructs, Sheets, Elements, etc.
I copied the files over and used the Reference Manager to repath the files. However, all of my schedules and room tags now use the 'NA' prefix because it is not reading the project information. How can i reconnect this folder to the project folder?
View 3 Replies
View Related
Oct 25, 2011
I have a little animation of molecules forming and breaking down in cycle. The animation is keyframed but there are also Linked Constraints involved with no keyframes.
How can I bundle up or group this animation and objects including the linked constraint timings and clone it so I can then scale up and down the animation time and keep everything in working order?
Basically, How can I include the Linked Constraints in my bundle?
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
View 4 Replies
View Related
Jan 7, 2013
I seem to not be able to add a folder that is on our network for content explorer all I see is my computers folders not the servers folder. Is there away to add them? I've tried to drag and drop and it says cant find or have access to warning.
View 9 Replies
View Related
Sep 6, 2013
I've been trying to install autocad but seem to fail because of my installation path?
I'm pretty confused of the fact that the installation path is not my default folder and when I tried to change it back, there's no way to do so. I've attached a copy of what's happening whenever I try to install it to have a better understanding of the issue. I thought it was my computer at first, but I checked all my settings and my installation path is steadily in (C folder..however autocad aims to be installed in a different path (D and then freezes. I clicked on all 3 options at the bottom (Installation - system requirements...) but nothing allows me to change back my path folder so that the installation can take place.
View 5 Replies
View Related
