AutoCAD 2013 :: Installation Path Is Not Default Folder
Sep 6, 2013
I've been trying to install autocad but seem to fail because of my installation path?
I'm pretty confused of the fact that the installation path is not my default folder and when I tried to change it back, there's no way to do so. I've attached a copy of what's happening whenever I try to install it to have a better understanding of the issue. I thought it was my computer at first, but I checked all my settings and my installation path is steadily in (C folder..however autocad aims to be installed in a different path (D and then freezes. I clicked on all 3 options at the bottom (Installation - system requirements...) but nothing allows me to change back my path folder so that the installation can take place.
View 5 Replies
ADVERTISEMENT
Nov 19, 2013
I am looking for a way to make xref/image path relative by default. I have not found a solution for that.
View 3 Replies
View Related
Jun 13, 2013
Is there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
View 9 Replies
View Related
Mar 2, 2012
I am new to PS scripting and trying to create a basic script to gather folder paths and then remove the path of that folder. I have created a basic array and while trying to
View 1 Replies
View Related
Feb 16, 2014
Im using the most recent version of Lightroom 5.3 (updated through CC - even though this has shown up on previous version) on Windows 7 and all the folders in my library are showing up with the directory path in front of my folder names. How can I get rid of this? I do not see any options in preferences to turn this off. I have also turned off preferences in Windows > Folder Options Control Panel "Display full Path in Title bar" option.
Â
I have Lightroom on several computers and have set up preferences the same on each workstation, and this only shows up on one workstation.
View 2 Replies
View Related
Oct 12, 2012
should there be an adobe Photoshop cs5 folder when i've only installed cs6 master collection? clean installation, no previous installs. when i try to launch the Photoshop.exe in the cs5 folder, i receive an error. I'm assuming this is part of a normal master collection cs6 installation?
Â
if not, is it safe to remove the folder, as there is no uninstallation entry available for Photoshop cs5.
View 9 Replies
View Related
Oct 30, 2008
i having installation problem after i restore my pc, where i have install it normally before window restore. after install it doesnt work at all.
It set the installation path to common files folder, i have try uninstall all and reinstall it but still cannot modify the installation path.
View 3 Replies
View Related
Apr 25, 2012
I just purchased Corel PaintShop Pro x4 today.At the beginning of installation, a box pops up and says: "The feature you are trying to use is on a netwok resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "vcredist.msi" in the box below."
Nothing works when I change the destination folder, and when I finally click "cancel" another box pops up saying: "Error 1714. The older version of Microsoft Visual C++ 2005 Reditributable cannot be removed. Contact your technical support group."
View 1 Replies
View Related
Jun 23, 2013
I downloaded Creative Cloud and installed Lightroom 5 without issue, but because they defaulted to my very tiny SSD system drive I moved them to my storage drive and created a symlink for both in their original locations. Now I am attempting to install Photoshop CC and it fails immediately, giving the error EX20, "Unable to extract files. Press Retry to download again or contact customer support." Clicking Retry causes the button to flicker the message "extracting" momentarily and return to the Retry button. What shuld I do?
View 1 Replies
View Related
Sep 14, 2012
I am currently using this code to get the folder name (fourth) containing the current drawing.
Â
FolderName = Dir(ThisDrawing.path, vbDirectory)
What would I use if I wanted to get the foldername one level up (third)?
ex. C:FIRSTSECONDTHIRDFOURTH
View 3 Replies
View Related
Oct 27, 2013
When I tried to install the photosohop CS5, the below errors keep prompting out.
Â
Exit Code: 7Â
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 70 error(s), 58 warning(s)Â
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
[Code].....
View 13 Replies
View Related
Jan 15, 2013
I have some stand alone AutoCAD installations, and I want to know if is posible to hide the SN. I know that when I create a deployment I can select the silent mode to hide this, but I have many SN and i dont want to uninstall the software.
View 1 Replies
View Related
Sep 24, 2012
I am using AutoCad LT 2013, 64-bit on Windows 7 Professional. I noticed there is an update available as I was using the program. When I attempted to update Service Pack 1.1, I get this error "A problem prevented the Service Pack from being installed. Contact your system administrator. Error 1603"Â
View 9 Replies
View Related
Jan 8, 2014
What is the best method to re-path x-refs in a project whose folder has been moved. We are talking about 60-100 x-refs here.The originals were created in ACA 2009 and were not pathed relatively; nor was Project Navigator used. We are currently using ACA 2014.
View 1 Replies
View Related
Feb 12, 2013
I'm try to write a list to produce a script file!I just want to insert a dwg file in current drawing.back to MS Windows, in case of having [space] in a folder's name, we should use "" marks:
CD "Program Files"; DEL "file 10.txt"; ....
I tried both with and without "" marks but I failed!I pasted part of my code below with result of each case:
(setq TBFile "H:z.autocadA1 A2 A3.dwg")
(write-line "-INSERT" des)
(write-line (strcat "*" TBFile) des); ; *H:z.autocadA1 A2 A3.dwg  <<=should be this
(write-line "0,0" des);;insert point
(write-line "1" des);;xyz scale
(write-line "0" des);;rotation
[code]....
View 4 Replies
View Related
Sep 26, 2012
I'm currently getting the "1324 Error. The folder path 'My Documents' contains an invalid character."
when trying to run AutoCad 2010. It had been working fine previously, but now it gives this error and won't allow me to use it. I am also unable to uninstall or reinstall the program without getting the same error.
I have confirmed that the profile is not set to roaming. I have also tried deleting the registry entries as recomended here:
[URL]
The user account is local administrator. The OS is Windows 7 64bit.
View 1 Replies
View Related
Jan 15, 2013
I'm running Acad 2012 on my personal computer...no network.
Last year I set up a new Design Center 2012 folder,that linked my DC toolbar icon, etc, containing my personal block set that I use in Design Center 2012. Everything worked great. Suddenly something has changed.
1. I previously removed the stock DC2012 folder and replaced the folder with a new folder titled Design Center 2012 folder containing my personal blocks, the new folder was placed it in the proper Autodesk file location and worked fine for a year,
When I now go to DC thru the toolbar icon it takes me to the stock DC folder blocks, which I physically can't find a trace of on my computer, but are obviously still on my hard drive somewhere.
2. There is no DC2012 folder which contains the stock blocks on my computer (I have them saved to another drive), only my personal blocks are in my new DC 2012 folder.
3. If drill down thru C drive properties to the AutoCad 2012 folder in Autodesk, my personal DC 2012 items are there and functioning fine if I click them directly.
So, how can I redirect the Acad DC toolbar icon, or whatever, to recognize my "real" (personal) DC 2012 folder w/my own blocks inside instead of the stock? It worked before.
View 4 Replies
View Related
Jul 20, 2012
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
View 5 Replies
View Related
Nov 25, 2013
I am working on a PLTW image that includes Inventor. We had an issue with our original image and had to rebuild it. Now we are running into an issue with setting the Default Content Center Files path. In our profile (DefProf) we use to create the Default profile the path is set to
"%USERPROFILE%DocumentsInventorContent Center FilesR2013".
However, when we use this to create the Default Windows Profile and log in as a user (Test01) the path changes to
"C:UsersDefProfDocumentsInventoryContent Center FilesR2013".
We did not have this problem on the other image.
View 3 Replies
View Related
Jan 11, 2013
Looking for registry keys to control the default attachment type (Full, Relative, & No Path) for XRef, Image, PDF, & DWF in the attachment dialog. (I'm using C3D but this applies to plain ACad also).
For XRef the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ProfilesMyWorkSpaceDialogsXattachDialog
The value is "PathType" DWORD = 1 for relativepath
For Image the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ISM
The value is "ImagePathType" DWORD = 1 for relative path (NOTE: this value didn't exist, once I created it, C3D used the key for both storing the value when closing C3D the reading the value when presenting the attach dialog).
Looking for keys that control PDF & DWF attachments.
View 1 Replies
View Related
Jan 12, 2012
Is it possible to display the default windows explorer folder tree in the open dialog box instead of the current "Libraries" folder?
View 1 Replies
View Related
Apr 11, 2008
some way to specify where PS CS3 will look for files and where to save files. I do not want my CS3 files to be saved to the default locations, and it is a waste of time to have to re-direct PS every time I what to open or save a file.
View 1 Replies
View Related
Aug 19, 2011
When I try to open a file from the provided sample file I get different file another route, and do not know how change .
View 1 Replies
View Related
Oct 19, 2011
How, or if it is possible to change the default file location for a tube and pipe run?
I know that you can browse out and modify the file path on your initial save but is there any way to change the default?
Example of what the default is: (assembly part number = 123456)
location for Tube and Pipe runs: C:ProjectsDesign Files123456123456AIPTube and Pipe
location for Run File: C:ProjectsDesign Files123456123456AIPTube and PipeRun01
example of what I would like the default pathing to be:
location for Tube and Pipe runs: C:ProjectsDesign Files123456
location for Run File: C:ProjectsDesign Files123456
basically I would like to remove the sub folders so all files are saved in one folder location.
My company is using inventor routed systems 2010.
View 1 Replies
View Related
Mar 6, 2013
Where is Photoshop 6's default folder for actions - I wish to place an action in it so it loads on start up.
View 4 Replies
View Related
Sep 8, 2012
I installed Photoshop CS6 on my iMac and MacBook. The MacBook has a "Default Actions" folder in the actions panel with 13 default actions. This folder did not appear on my iMac following install. However, my iMac has several image and text effect actions installed that did not install on my iMac. Would like to have the Default Actions on my iMac and text and image effect actions on my MacBook.
View 2 Replies
View Related
Jun 27, 2008
Is there a way to set a particular folder as default for when you "save as" files?
View 3 Replies
View Related
May 7, 2009
I have PSCS3, and have downloaded a set of fonts. But were to I find the folder to place the downloaded fonts into PSCS3?
View 2 Replies
View Related
Jan 2, 2013
First: I ordered the Smoke 2013 (floating-)licence through a german reseller a week ago and I still got no answer. Is this a normal "new years eve" delay?
Second: The Smoke installation is on a computer that's OS was actually cloned from another computer. The HostName, LocalHostName and ComputerName were changed, but Backburner still insists in using the "original" name given at the OS-Installation. So if the other "clone-computer" is running, Backburner gets in trouble and is stuck on waiting. During the troubleshooting process I turned on websharing to access [URL] ..... This led to the result, that anytime i restart the machine the computername is changed to 0.0.0.0 and the backburner wount work. No way, yet, to bring this back to normal.
Third: Waiting for the smoke-licence I already begun working on the project. Now it seems that I'll have to do a clean install of the system to get it finally running. But I do not want to loose the work so far. Is there a way to bring the actual project back into an new installation of OS/Smoke without having to archive it which does not work at the moment?
View 2 Replies
View Related
Nov 1, 2012
I've created a 23-minute video I want to burn to DVD in VS Pro 5...
At the point where I select BURN in the burning process, I get hit with a message telling me that my working folder path "may not have enough space" to allowing burning. The message advises me to change the working folder path in Preferences to enable burning. The message notes the working folder path as C:Users[My initials]DocumentsCorel Video Studio Pro15.0...
That path does exist on Drive C (where there's only around 5 Gig of space left), but when I go into Preferences to change the working folder, Preferences shows it having a path on Drive F (where there's 1.47 Terrabytes of space!)
So, how can I change the working folder path to Drive F from Drive C, when the project Preferences show the working folder path to be on Drive F, the the program itself claims the path to be on Drive C (and a search shows such a path)?
I'm running under Windows 7 Home Premium.
View 2 Replies
View Related
May 28, 2013
I Would like to change the default Templates folder that opens when i click "New From Template". Is there a way of doing this?
View 2 Replies
View Related
