AutoCAD 2010 :: Permission Needed To Edit The Drawing File
Dec 26, 2012
I would like to know about the permission needed to edit the autocad file. In my folder there are many autocad files. I need to give the edit permission to one particual file to a specific user.
First i tried with folder level security. But i failed.
1. I have given full permission for the particular user (Except: Delete,Write Attribute) in the folder level. But when i tried to open the drawing file, it throws an error. Error: "File is currently using by the user1. Would you like to open the file read-only?"
2. I have given full permission for the particular user (Except: Delete) in the folder level. Now i could open the file successfully. But after editing, when i tried to save the document, it throws an error: Error: "Unable to save to drawing D:TestTest.dwg as it is being accessed by another session. Drawing saved to "D:Testsav460B.tmp"
3. Now i have given full permission for the particular user including Delete permission in the folder level. Now i could save the drawing succesfully after editing.
From this , i guess, it needs delete permission in the folder level to edit and save the drawing (I understood this is for creating/deleting tmp/.bak files during saving the document.). But giving delete permission in the folder level is very risky.
View 9 Replies
ADVERTISEMENT
Apr 17, 2012
error: Can't obtain permission to edit the element: The Central Model is inaccessible. You can check out worksets at risk, but consider carefully!thats what it says i took the file of my the drive but cant edit it.
View 1 Replies
View Related
Aug 20, 2013
(if (findfile MyFile)
(setq fl (open MyFile "a"))
)
the file exists however the open function still returns nil... the file is not read only, and permission on the file appear to be just fine.What other reasons would there be that cause open function to return nil?This is happening only on one machine. All the others are writing to the file just fine.
View 5 Replies
View Related
Sep 5, 2013
I currently use only 2D applications. I'm having a problem with text. No matter what font I use the text comes in as a block, if I need to make a correction I have to explode the text before I can edit it.
In my much earlier version of AutoCad I didn't have this problem. I can't find anything in the text settings windows to change this. Is there a setting or flag in 2013 that will just use text without having to explode each occurence of it for any editing?
View 6 Replies
View Related
Oct 16, 2012
I have a simple sheet metal part that does not require explicit bend radii. We leave it up to the shop to fab this part up as long as it's final outcome is within tolerance. We don't normally include a flat pattern, simply because it could cause confusion when cutting a blank. I use the default bend allowance and bend radius, which gives the exact blank size and bend locations. But our local fab shop probably doesn't/won't use the correct tooling to provide the exact bend radius, so this will throw off the final outcome if the blank was cut using the flat pattern dimensions.
I can apply the flat pattern to my drawings, because there is some sheet metal components we have that require the flat pattern to show cut profile features.
View 9 Replies
View Related
Nov 12, 2012
I can open cad files, i can add informaiton but I cannot delete or edit/open blocks.
I can not make any changes to block, i cant even move them.
If i type in the command BLOCKEDITOR my response is 0-READ ONLY
View 1 Replies
View Related
Apr 23, 2014
change permission file pdf in script jsx indesign cs6
View 2 Replies
View Related
May 1, 2013
add a line to the code you wrote so I could use iunembed or detach the old image in the begin of the lisp command. Iunembed command ask what to name tif after it is unembed. Is there a way to detach the old embed image and run the other parts of the command? Keep in mind I change the lisp little bit.
; Attach Drawingname Image [insert] at scale 12
(defun c:AI12 ()
(defun dxf_ (n L) (cdr (assoc n L)) )
(defun dxf (n L) (cdr (assoc n L)) )
[Code].....
View 9 Replies
View Related
Jul 7, 2005
I'm looking for a script or action that will put the file name on the bottom of the picture. NAAP has a good one today but it puts it in a PDF file. I just want it on the JPG.
View 1 Replies
View Related
Mar 9, 2012
As an engineering company we have started to convert hundreds of our drawings from AutoCAD to PDF using a batch utility.
However every file that is converted into a PDF file is opened by a PDF Viewer. We want to prevent this.
I opened my *.pc3 file and removed the check from the appropriate box. See below
I press OK, then save the file and close. However when I reopen the file, I see the box for Openining in PDF Viewer has been rechecked. No matter what I do, I cannot permanently remove the check from this box.
View 5 Replies
View Related
Feb 16, 2012
why I can't edit the "Vector Graphics" section in my PC3 file? See attached PDF. I belive that this is causing some undesired results when publishing to the plotter.
View 4 Replies
View Related
May 24, 2013
I want to add an attribute to a BLK file I have from a past release. Using this .BLK file, I can create a table from attributes in my drawing using a LISP routine.
It seems there is no way to create or edit a .BLK file that I can use for this in ACAD 2011, it only creates .DXE files.
The problem with the .DXE file is that is saves the drawing that the original extraction is performed on. When I use the .DXE in another drawing, it uses the original drawing data unless I manually "delete" the old drawing reference using the dialog box in the extraction wizard.
The .BLK file works perfectly, but I want to add an attribute. How can I create a new, or edit my old .BLK file?
Will I have to reinstall an older version of AutoCAd to accomplish this?
View 2 Replies
View Related
Sep 1, 2009
Size of Drawing file is 4.33 mb. But Can not Open. A message appears " Drawing File Invalid"
Can I Retrieve the data.? No backup file is available in my system. I have tried with recovery tool but unable to get original data
for Any other option .
View 9 Replies
View Related
Jul 27, 2010
When I try and open a file from the network that another user already has open, I receive the following message:
"Cannot find the specified drawing file. Please verify that the network drive is available and the file exists".
This happens when using Novell Netware. Is there a resolution?
View 2 Replies
View Related
Jun 28, 2012
I don't know what happened, but my autocad file doesn't open up with a message "drawing file is not valid". I opened it at home once in Autocad 2012 - Student version and I open it at school usually every other day in Autocad 2012 - Educational version and it opens up properly at both places. But this tuesday I tried to open it, and it didn't open. I really need this file to be recovered because this drawing was complicated and I finished it. So, it will be a real pain to do it all over again plus the time I will waste. I am going to attach that file here.
View 8 Replies
View Related
Feb 19, 2012
Why plotting the drawing in pdf file produces a NOT to scale drawing?
I’m wondering if there is a way to print the drawing in a pdf file such that the drawing scale is kept correct.
For example, I tried to print the drawing shown in the screenshot in 1/100 scale using the Adobe pdf printer, but later, as I printed the pdf file, the printed drawing is not to scale!
Why the pdf file doesn’t keep the scale?
Is there a way to “preserve” the scale while printing the drawing in a pdf file?
View 7 Replies
View Related
Nov 30, 2013
I have a scan of a drawing that I need to get into photoshop but the scan goes onto page 2 of a pdf file. How can I edit the two scanned pages to end up with the drawing on one page in psd file?
View 5 Replies
View Related
Mar 7, 2013
We have a drawing that has been exploded purged, overkilled, audited and we still cannot decrease the size of it. Theres no blocks, theres no 3d, its a very simple drawing but I feear its corrupted. I've tried copy/blocking the information out of it but that just makes it crash. I cant attach it its too big! (16 meg)
View 9 Replies
View Related
Mar 22, 2012
how to delete shape file which comes from other drawing
View 1 Replies
View Related
Mar 2, 2012
I am on a 64 bit Windows 7 HP computer with AutoCAD 2010, and I am having a problem plotting a long (24" X 190") drawing file. We have a RICOH Aficio MP W3600 PS plotter. I have gone through the proper procedure through the Plotter Manager all the way to Select Custom Paper Sizes but the Add button is grayed out and I can't add a new user size. I was able to do this with AutoCAD 2004 on a Windows XP system but can't on this setup.
View 1 Replies
View Related
Feb 19, 2012
I saw this feature in a drawing but can not figure out how:
Within a text box is linked to the file name, if I close and rename, when I open the file name is his name changed into the drawing with DWG extension including. How do I do this?
View 3 Replies
View Related
May 7, 2013
how do I attach or insert a drawing from one dwg file into another dwg file? I'm drawing some and i want a site plan off of a different file i just want to take it and but it in my new drawing without have to draw the site plan over
View 3 Replies
View Related
Mar 22, 2011
keep getting program not responding message when I try to open a drawing.
View 9 Replies
View Related
Feb 24, 2012
I have to list all object data on some 4000 drawings. The drawings have been created in an unkown version of autocad and are electrical in nature. It would be great if a LISP file could be created to extract all of this too individual Excel or text files.
View 1 Replies
View Related
Oct 17, 2012
Using ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
View 1 Replies
View Related
Jan 29, 2012
Can the Plot command be used to combine multiple drawing views into a single DWF file?
View 1 Replies
View Related
May 26, 2011
How do I create a new CTB file OR insure that a drawing is supported by an existing CTB file? I have tried to start one from scratch using Plot window - when I click on file - it sends me back to MY DOCUMENTS. Is this a glich??
View 9 Replies
View Related
Jun 6, 2011
Does the command still exist to export a drawing to the 3DS file type? I remember doing it in 2007, but do not remember the command and can not find it in the help files.
View 9 Replies
View Related
Aug 9, 2012
I am attempting to attach a title block into a layout. This is my process:
1. Go to Building1 drawing, and go to layout. Without any viewports created, I attach a dwg file named titleblock1.
2. When I specifiy the location and scale, I cannot find the attached drawing.
why can't I attach files larger than 1.5 KB? I can't attach anything useful!
View 1 Replies
View Related
Aug 22, 2012
This drawing file doesnt allow copy to clipboard or even binding on to other drawing. It was originally sent to us from another company, I have deleted all the objects and layers, purged it. If I create a new line or other object, Ctrl+C doesnt work.
View 2 Replies
View Related
Apr 30, 2013
I have determined that an AutoCAD drawing has the unfortunate ability to have Annotation Scales "hard coded", meaning they CANNOT be removed from the drawing.
Let me explain....
In a detail drawing file (i.e. my master drawing file where I keep all of our standard details), I was getting duplicate Annotation Scales. I would try to use the SCALELISTEDIT command to try and delete the anno scales not being used, but it would appear they WERE being used. (and resetting the anno scales didn't work either)
I was using a combination of tricks to determine WHICH annotation objects were using the duplicate anno scales. I would set ANNOALLVISIBLE to 0 and set the CANNOSCALE to the duplicate anno style to see where they were being used with no luck
I would then use the QSELECT command to group select each type of annotation object that were annotative, and check to see if they were using the duplicate scales. Again, no luck
THEN, I decided to cut-n-paste each detail one-at-a-time from my master drawing file to a new BLANK drawing with only one annotation scale in it (i.e. 1:1). I would paste a detail, and then enter the SCALELISTEDIT command to see which anno scales "came along for the ride". I pasted a particular detail that carried over the duplicate anno scales, but when I checked all of the annotation objects for the duplicate anno scales - NOTHING! I then deleted that particular detail, purged it, and then I was able to delete the duplicate anno scales. But no matter what I did to try and fix that detail (i.e. wblock, cut-n-paste, save-down, etc) the duplicate anno scales simply will NOT be allowed to be deleted even though i cannot find any objects associated with them.
View 8 Replies
View Related