I'm trying to figure out a way to reduce the size of a cylinder that is created in another program (LFM or Cyclone) and imported into Autocad. I've tried Solidedit and I can increase the cylinder diameter but I can't reduce the cylinder diameter.
View 5 RepliesI made a small plant and to create pipes i used cylinders, now I need to create a material list and for this I need to extract the radius(diameter) and height for each cylinder, but i don't know how. I am having lot's of cylinders (2000 elemets). I put also a sample here.
View 4 Replies View RelatedI need insert a cylinder into inner diameter of a ball bearing, logically it must rotate with the bearing but no, the bearing outer diameter is fixed to a support and works well, but when i insert the cylinder into the ball bearing it's fixed completely and the cylinder rotate into the inner diameter.
View 9 Replies View RelatedHow to convert the single line below containing 42" radius curves to a solid 4" diameter cylinder/pipe?
Capture.jpg
I bought a software which comes with a camera auto-focus calibration chart. The manufacturer mentioned that this chart is generated by a vector base program so customers can ajust the size of chart without any problem. The chart file is in pdf format.
When I use my Photoshop CS5 (on Windows 7) to print it from my Epson 2200 inkject printer, it only print the vector part without filling up the inside of the vectors enclosed area to black. Even the words in the footer are printed the vectors only (without fillup the word with black).
what's the cause.
How to edit a .wmf file that is a graph and was generated by a statistical program. I need to visually enhance this graph, making it look more appealing for publication in a manuscript. It's very simple, just need to make rectangles behind the existing text that form the columns in the graph, and shade the rows of the graph to assist the reader to follow the row across the graph. While I can edit the text on the .wmf, I can't get a rectangle to be placed under the existing text unless I lower the opacity of the rectangle which won't work as I need black and white only. I've tried converting the text to rectangle, but the stretching of the text won't be acceptable. What would be the workflow I should attempt to follow to enhance the looks of the document in illustrator? Is there a trick to getting the rectangle to behave? It works just fine if I actually type NEW text in, then place a rectangle, but I'll have to work with the info in the .wmf file - can't re-type it all.
View 4 Replies View RelatedI'm trying to create a "wipeoutish" track using splines. In fact, the track itself is generated by a tool and I want to use it in 3dsMax to create the environment.
So i'm importing the spline into 3dsMax, create a template spline and use "Loft" or "Sweep" to extrude the model along the track. But whereas everything works if my track is perfectly planar, I get some crazy stuffs if there's even the slightest change in the Z axis.
I've tried disabling Contour (then the track is horizontal but there are problems at each turns) and Banking but I can't seem to be able to get a perfectly horizontal track using this way.
Is there a way to force the normal of the generated Track to be vertical ? (get the green track over the spline used by the blue track ...)
3dsMax 2011 (x64)
Windows 7 x64
i often see ways of making particles follow splines. But is it possible to create spline paths generated with pflow ? using 3ds max 2013
View 3 Replies View RelatedI am trying to rotate the cylinder 90%%d on the y axis and then position it so that the bottom of the cylinder is flush with the top of the plane denoted by the rectangle. How is this done in 3DS Max?
View 1 Replies View RelatedI'm attempting to follow instructions from a book to scale down part of a cylinder (as shown below). To quote the instructions directly:
[QUOTE]"Right-click the cylinder, and choose Face from the marking menu. Select the end faces, and scale them down a bit as in Figure 4.43 [ATTACHED]. This gives you the main part of the boiler."[/QUOTE]
I can't get it to scale down the way it is depicted in the photos. I tried selecting the faces and simply scaling, and I also tried selecting the faces and choosing "Extrude" first, and that did not work either.
Is it possible to slice one poly with another poly?
For example, the attachments shows a plane intersecting a cylinder. How would I slice the cylinder with the plane?
i need to flatten the semi cylinder into planer surface...is there any modifier to do this...also i described exact need in the attached image..
View 8 Replies View RelatedAs the title indicates I want to redefine the layers for section lines and generated sections.
View 3 Replies View RelatedWhat is the smallest object I can draw and "SEE" in AutoCAD? I was hoping to prove a point in my introductiory AutoCAD class, but it appears I have been lying!! I tried to draw a cirlce with a diameter of 1.24E-10m. The dot shows up, but I cannot zoom to it. I tried using an enormous zoom scale, but did not have any luck. I am almost positive my instructor introduced the capabilites of AutoCAD by drawing a full scale helium atom, and that was release 14. Is this still possible? Obviously the atom can be drawn, but what are the zoom limitations?
View 5 Replies View RelatedWe are using Autocad 2012 & some of our users can not put Degree, Diameter, Plus/Minus Symbols in their drawings.%%P, %%D, %%C does not work in single line or M-Text. The symbols work In dimensions.
View 3 Replies View RelatedWhen I dimension an arc to find the radius, the dimesnions appears as a line going from teh center of the arc to the edge of the arc with the dimension in the middle. I don't want this. I want a leader pointing to the R text and that's it.
I've attached a photo of both scenarios- one dimension is the style I don't want, and one is basically the style I want (I'd like it to be more of an elbowed leader line), but it only appears when I use AutoCAD's ISO25 dimension style.
I am trying to figure out how to put a miter on one end of a 3d solid cylinder?
View 1 Replies View Relatedhow and if I can put a miter on the end of a 3D solid cylinder, I am trying to draw a tank that has a 10 degree sloped bottom with a 1" radius fillet around the bottom at the sloped end.
View 8 Replies View RelatedIn inventor 2013 I want to extrude a horizontal circle on surface of a bigger vertical hollow cylinder. but what i did it enters into cylinder, and i only want to extrude it on external surface.
View 1 Replies View RelatedI'm trying to print out a Layout in Autocad 2012 but the edges of cylinders either go faint or disappear completely.
This happens when using both PDF and normal printers. If I look at the layout in Print Preview all the lines are there in full. Attached is the result of a PDF print.
I have a bunch of parts drawings created in LT 98 that I am now editing in LT 14. For the most part I haven't had issues. However, I have been having a big issue with the Text function. It doesn't matter if I am trying to enter new text (Multi or Single line), or if I try to edit the existing text. Either way, the program immediately locks up & will not snap out of it.
View 2 Replies View RelatedA vector editor/maker similar to the UI of PDN? I always liked the simplicity that PDN offers while being able to create stunning works, but I'm working on some flash movies and have been told vector images are the way to go.
View 2 Replies View Relatedi've modeled a character or two from scratch in max. (nothing spectacular) I also used a character pack a few years ago. I was wanting some info on the best way to model a new character. I would like opinions on zbrush, poser, etc. Something that is very compatible with max.
What is the process that you take when creating a character. Don't feel the neeed to write a book I get the basics. Been out of the game for a while, but very glad to be back. Been playing around with fumefx, houdinni ocean, and ivy lately.
On my first two pictures I put the names of the people in the picture as keyword tag. I have tried to remove the tag from the drop down menu but this does not work. I get an error when I auto try to find tags. Do I have to delete both pictures to get this out of the file? Will this remove these names from the keyword tag drop down window?
View 3 Replies View RelatedI have Photoshop CS3 and CS5 Extended on my computer. CS3 is the default external editing program Lightroom 5 chose to use to open files during initial setup, which causes selections such as "Open as Smart Object or Merge to Panorama" to be grayed out. How can I change the default to CS5 Extended, short of removing the CS3 version on my system?
View 1 Replies View RelatedWhile editing a photo in CS3 the program shut down and will not reopen my psd file. The error message reads "cannot complete your request because of a program error" -- it is a very large file (I have been saving it all along) and I had just "flattened layers" and went to open up a new, blank photo file when it shut down. Is there anyway to get this file to open?
View 4 Replies View RelatedIs there any way for editing more then one meshes at a time? For example: I want to extrude, bevel, connect components of my two cubes at the same time.
View 2 Replies View RelatedI'm looking for a photo editing software program to combine my burst photos from my GoPro Hero 2 camera into a single photo. Will Photoshop Lightroom allow me to accomplish this.
View 2 Replies View RelatedWhen I go to edit mesh on a brand new hedra and take two points and scale them, the sides are uneven, one side isn't scaling properly. It looks to be the one with the square edge. Here's a video.
[URL].........
I'm having trouble getting a precise value out of the distance tool between two locators.
I can definately move the upper locator and the value will change, but I'm having trouble making it very precise. I'd like to change the distance to exactly 2.10000. I've been scouring the web, and coming up with nothing unfortunately.
I am trying to work out a plan in Autocad and it goes so slowly. The slowest of all actions I do is always drawing a simple line. No other program is running on my laptop.
View 9 Replies View Related