I'm looking to recreate something similar to what is in this video..The very first 180 flip that happens, except along the vertical than horizontal. best approach to achieve this in After Effects?
View 2 RepliesI'm using the card dance effect to bring some images together to form another image. When they fly in they look a bit choppy. I've attached an image of the settings. I cant see any setting that would make smoother.
View 2 Replies View RelatedPlease take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
I received a drawing from a client, which has all the features on a coordinate system, But the drawing is rotated for some reason. Even after rotating the drawing the coordinates are the same as it was prior to rotation. I believe there may be some variables that has been changed for this. If a line is drawn A@100<0 it is drawn vertical instead of horizontal and like wise @100<90 is drawn horizontal instead of vertical.
Attached is the drawing.
This should be very simple: frame 1 = 0 degrees rotation, Frame 10 = 360 degrees rotation (e.g. propeller). Max just makes frame 10 = 0 degrees, therefore, no movement.
View 6 Replies View Relatedwhat kind of curve is this (e.g. Bezier, B-spline, or NURBS) and how many degrees are this curve?
View 5 Replies View RelatedHow can rotate a circle 360 degree in PS CS6 in Time Line [for GIF animation]?
Transform [Rotating with Transform] is not work in Time Line? Like this, I want to rotate a rasterized circle 360 degree [like a Radar Indicator]...
I want to create a 5"x5" square protractor in photoshop. Basically I create a 5x5 canvas, and need to apply 360 lines through the exact center (not sure how to find center exactly) and have them go out in 360 different angles.
View 1 Replies View RelatedI'm using AutoCAD 2012 and I'm having a problem with 3D orbit. For some reason I can only rotate the view 180° along the X axis. Y and Z are fine, I can rotate a full 360°, but the X axis "bottoms out" if I try to rotate the view more than 180°. Is there something toggled that's causing this?
View 1 Replies View RelatedI have a simple solid channel of 260 m length (shape of rectangular drain), The bottom slab I wanted to tapered outward say by 1 degree. I used solid edit > face> taper> choose the bottom face, choose the axis (longer) and give the angle, then error shows
"No loop through new edges and vertices." sometimes
"Modelling Operation Error: Change in topology detected."
i was wondering if it is possible to draw a polynomial of the 4th degree in Autocad and if it is, how would i do this?
i was thinking along the lines of nurbs, but i don't know anything about nurbs!
I'm trying to sweep it around shape like this But it won't, it says "The selected path curve is not valid." - so what do I do? (it is polyline) Is there maybe some other way to get this 3D shape fast?
View 8 Replies View RelatedI have made background png pictures and I have copied sections of such pictures onto other pictures, but the copy is never translucent or partly transparency and I have not found a way to do that. I can choose a degree of opacity when I simply fill an area with a solid color, but I have not found that option in the copy command. Is there such a capability in Gimp?
View 5 Replies View RelatedIf there is a way to rotate an image in anything other then 90 degree increments?
View 4 Replies View RelatedTrying to figure out how to create 3d 360 degree spherical panoramic. All my searches come up with older versions. CS6 does not have the 3d menu so where do I find out how?
View 6 Replies View RelatedHow to get the degree of curvature (DOC) for a curve in an alignment to be reported for Civil 3D 2007 like was reported in the 2006 version?
View 8 Replies View RelatedHow to set a value and label the “degree of curvature” for the horizontal alignment (HA)?
As the radius of the circular alignment (R) is calculated from the “degree of curvature” (attached) then I couldn’t figure out how to select a particular value for the “degree of curvature” (R=1718.8/Da) and then to label the horizontal alignment with it.
I am trying to create an expression so that I can put the Dc into my alignment curve label. I am using (5729.58/Radius) for the expression and using Double for the format which comes out fine in decimal form as in a curve with a 200' R comes out to be 28.6479º, the problem is that I need it to come out as Angular DMS... when I switch the format to angle it comes back as 1641º24'14".
View 4 Replies View Relatedeasier way to program 45 degree corners on the top flange of two mating parts. We can't bend the ends on so they have to be welded. I am using inventor 2014 professional. Almost all my programming is done in sheet metal.
View 2 Replies View RelatedI really want to create 360 degree views for my products. I can take the images no problem but need to stitch them together. Is this even possible with any Xara products? This is the kind of thing i'd like to do. [URL]
View 2 Replies View RelatedI'm trying to join a helix onto a 90 degree bend but I can't get the 2 ends to marry up.
I am self taught so I don't know all the commands but I understand the concept from using Maya / 3Ds Max in the past.
Also why do I see the diagonal lines at the end of the 90 degree?
Ihelix.jpg
Took a quiz and give us a drawing of a pipe bending on 90 degree.
View 9 Replies View RelatedI'm experimenting with 3d printing and wish to create a tube system based on this vase. Im completely new with 3ds max. What's the easiest way to simply bend the entire model 90 degrees? URL...
View 2 Replies View RelatedI'm trying to draw the following bench in Autocad but I'm getting bogged down trying to figure out how to create the following tube with an angle on it and how to achieve different shapes at the top of tube.
View 9 Replies View Relateduntitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
wrapping a continuous line of text around a 90 degree bend. The third attached image is exactly what I need it to do. That is something I just put together as an example though.
I have some repeating information that I want to wrap around the border of an image. Being that it is repeating information, the text can also look like the first and second image uploaded, where part of the word is cut off. I would prefer this to be minimal though.
So far all I have found in my time searching on this leaves the words distorted.
No matter the complications, this also needs to be scripted. It is not feasible to do this manually as the repeating information is dynamic.
EDIT: The upload for the thumbnails is off.
Added Details.Attached File(s) textwrap2.jpg (8.9K)
Number of downloads: 19 textwrap2.jpg (8.9K)
Number of downloads: 17 textwrap.jpg (8.38K)
Number of downloads: 7
How do I go about increasing the diameter to a degree symbol? Am using the ROMANS.SHX type of file, and when used the degree symbol is sort of miniature (looking and plotting) in comparision to the numeral next to it.
What number do I have to alter in the .SHX file to enlarge it then?
I want to make this part that bend 15 degree at 800 mm from bottom. In my attempt.
First, I bend it 15 degree.
And, make flange from Face and upper flange then I stuck with error.
I feel like I am going crazy, but for the life of me I cant figure it out. I am on a mac using version 16.0.0 and the "f" key works when I am not using the tool, for its other function, but as soon as I start to draw it wont work. I tried deleting the prefrences and everything.
View 2 Replies View RelatedAssume PS CS6. I cannot find an easy way. I have tried Character Panel, select the superscript and type letter o for degree symbol. But how to get it directly?
View 7 Replies View RelatedI am having trouble 3d modeling an 8" to 6" reducing elbow.
View 8 Replies View Related