3ds Max :: How To Light A Sphere From Inside To See Inside Surface
Oct 17, 2011
I have a really large sphere and have put a camera on the inside to see the inside surface. I have used the normal modifier to flip the normals and so have the skin on the inside. Something is going very wrong at this point because I have this ugly shadow line that I cannot get rid of and I also seem to not be able to light this interior, when I use an omni light it makes no difference. Where am I going wrong?
View 7 Replies
ADVERTISEMENT
Oct 14, 2013
There are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
View 5 Replies
View Related
Dec 3, 2010
I really enjoy this new draw inside feature in Illustrator. But, I find that it does not always work. It seems to be grayed out sometimes. For example, I have drawn a shape with my Wacom tablet using a blush. I then converted it to a shape instead of keeping it a stroke by expanding it. But it will not allow me to now draw inside of it, even though it is a shape.
View 8 Replies
View Related
Nov 12, 2012
What is the technique to camfer or bevel that inside surface for the collar? It is a secondary sketch which was extruded all the way through the collar. All attempts to bevel yeilded an error message saying the sketch was too complicated
View 6 Replies
View Related
Feb 8, 2013
I have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
View 9 Replies
View Related
Jul 2, 2012
I have created a breakline from a feature line which cuts the triangles of my surface. Is there any way to create a seperate surface from the triangles inside the breakline.
View 2 Replies
View Related
Mar 11, 2013
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 9 Replies
View Related
Sep 15, 2013
I need an intersection of the surface of a sphere and a plane, producing a circular line.
I do not know how to do that.
View 2 Replies
View Related
Feb 2, 2012
I want to draw a line from the center of this sphere to where the sphere and TIN interesct
View 9 Replies
View Related
May 3, 2011
I need to form a line/lines with thickness on the surface of a sphere as seen on the attached image. I also want to apply transforms to the line while keeping it stay on the surface. How can I do that?
View 9 Replies
View Related
Mar 13, 2008
how to do this without having to buy some expensive software like QuarkExPress.
Basically, I have a word document that I want to watermark on each page. Then I want to convert this into a PDF (I use PrimoPDF for conversion)
However, getting the graphical watermark from word to PDF is still eluding me. For example, when I convert to PDF, the background images I place in are gone.
View 2 Replies
View Related
Jun 13, 2011
I am have a spate of issues with editable poly models turning themselves inside out - visible from the back, or underside, but not the top or front, and then you only see the face on the inside as it were.
When modelling it will sometimes happen when I do a mirror clone and then the original poly mesh turns itself inside out. Applying a normal modifier isn't much useful.
It is also doing it to some reloaded models which were previously fine.
It is a right pain as, while you can carry on modelling and render the model out (but only with MR materials) it makes seeing things in the viewport very difficult.
View 3 Replies
View Related
Oct 12, 2012
should there be an adobe Photoshop cs5 folder when i've only installed cs6 master collection? clean installation, no previous installs. when i try to launch the Photoshop.exe in the cs5 folder, i receive an error. I'm assuming this is part of a normal master collection cs6 installation?
if not, is it safe to remove the folder, as there is no uninstallation entry available for Photoshop cs5.
View 9 Replies
View Related
Oct 3, 2013
Using Photoshop CC, what the asterisk means inside the tab name? This is on the inside of the bracket, outside it would mean not saved. I'm using 16 bit files throughout and the ProPhoto RGB Workspace. Files are transferred in and out of Lightroom 5.2 as my front-end .
e.g. Nikon D700-4162-ME.tif @ 21.9% (RGB/16*)
View 2 Replies
View Related
May 6, 2013
I have a Photoshop PDF file that looks good on screen and includes retouching I did to it. However, when I place it in a PDF portfolio, the edits aren't there anymore.
View 1 Replies
View Related
Jan 18, 2013
Im trying to put text into or inside a circle so it fills up the circle,i will just be using one word not loads of words.
View 2 Replies
View Related
Aug 21, 2012
I just created a shape in photoshop and I want to add color inside of it but only in the shape.
View 3 Replies
View Related
May 3, 2013
want to put text inside an oval following or outlining the oval shape [URL]....
View 1 Replies
View Related
Oct 15, 2013
In MS Publisher, if you move objects off of the page they are in the scratch area. The scratch area enables you to have several objects readily available to you as you layout the page.To hide the scratch area objects and see a clean view of your page, uncheck the Scratch Area option. Objects that are partially on the page will appear clipped so that the portion in the Scratch Area is not shown. How can I do that in Coreldraw?
View 7 Replies
View Related
Jun 18, 2012
I am looking how to make a shadow to the inside
I have not found the automatic, and I do too much manipulation, I'm sure Corel has reviewed but where ...
View 3 Replies
View Related
Nov 20, 2006
When i go to stroke a shape ( for example a cartoon head) once its stroked in changes the inside colour as well. It used to be fine but now it is doing this and i dont know why.
View 1 Replies
View Related
Oct 16, 2008
I want to put a picture inside a marquee.
Rectangular Marquee...marching ants...I paste my picture in but it pastes not inside marquee just on the page.
View 4 Replies
View Related
Apr 13, 2005
I am a first time user of photoshop here and I have been playing around with the program for a while now but there is something that I can't seem to do and I would think it should be fairly easy to do. Maybe one of you can give me advice on how to accomplish this. Code:
View 3 Replies
View Related
May 21, 2004
For a web page, website, whatever you want to call it, this is what I'm trying to figure out. I want to be able to make a shape of anything, like a square, and inside that square add a picture of something. I want to be able to move that picture anywhere inside that square, without it coming outside, showing only a portion of the picture.
View 2 Replies
View Related
Apr 2, 2008
how to place an image inside of another?
View 4 Replies
View Related
Jun 27, 2006
How did the designer put HTML inside what looks like a graphic box?
It looks like the text in the dashed line graphics is also HTML.
Is this some kind of layering in HTML or CSS or what?
View 2 Replies
View Related
Aug 25, 2004
I'm trying to create a type mask in photoshop. What I want to do is to have a picture layer with a type layer on top. I want to only be able to see the parts of the picture that the type covers (i.e., if the type is my name you can see a dollyholland shaped picture - if you move the type around it will reveal different parts of the picture
View 3 Replies
View Related
Aug 3, 2005
How did he put the pics in the V without them coming out? Is it just cut and paste or is there an easier way?
View 3 Replies
View Related
Jan 8, 2006
Is there a way to get text to take the form of a shape... fitting inside the shape. Like inside a diamond so both ends are narrow. Without upsetting the perspective. Or like the harley davidson logo?
View 1 Replies
View Related
Aug 27, 2008
Can someone please help me find out what filter was used on the player on these boxes?
View 7 Replies
View Related
Feb 6, 2014
my ucs keeps moving when i try to pan inside my viewport and it doesnt allow me to pan my drawing.
View 1 Replies
View Related
