I am working on a model that came with lights and textures but I deleted those to render faster but all I am getting are white and black renders. Can I reset the project to default lighting/render settings without loosing my modeling work?
What I want is to hit the render tab and get the same result as if I just opened max, made a cube and hit render without any special lights or render settings.
my problem; when I use the filter; 'render'- lighting effects - it will no longer save any styles-(neither mine nor the pre-sets-they are gone).
Have tried reinstalling to different directory, etc but no avail. I can add lights and all during current session, but cannot save when i try, an error message just pops up and says"
"an error occured while trying to save the style"
Just upgraded to CS2 and went to Lighting Effects assuming to find the big drop down menu of styles, but the box is blank and also when I try to save a style I have made, it comes up with an error.
Any ideas where they might have all gone?
it started about a week or so ago but when i tried using the lighting effects filter rather than showing a shadowy gradient effect like it usually does it is either pue blakc or just shwos an unnafected picture and when i play with the lighting rig or change slider settigns like texture for example it flickers back and forth like it's broken
.
but it works perfeclty in CS5 without a hitch.
i tried searching to see if others had a similar problem but all i got was that CS6 either didnt coem with it installed or the app doesnt display correclty. i dont know what to do i dont want to keep goign to an older photoshop just to use it's basic features.
Render Lighting (and other 3D things) don't work on my laptop. Initially in Preferences Performance, Use Graphics Processor wasn't checked. In that scenario, I didn't get the first message below - just the secind one (not enough memory). I go back to check Use Graphics Processor, and I now get both messages. Under Advanced Settings, Use OpenCL is grayed out. System Info below.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]....
Previously when i use it, it would have a window pop out for me to choose the options... but now i cant...
I am using Windows XP and Photoshop CS2
anyone know the reason why? and what i can do to make the pop out window back so that i can make adjustments?
I have a problem with the lighting in my scene.My interior is really and I don't know why.I want a smooth clay render but nothing's happened.Is there any way to upload my file?
View 3 Replies View RelatedPhotoshop cc, render lighting effects filter not working, locks computer, prompts not enough ram, toshiba L755, with 8GB.
View 2 Replies View RelatedAny time I try to use Render Lighting Effects it locks up my system or states Photoshop has stopped working...
View 4 Replies View RelatedSince I upgraded from CS4 to CS6, I am unable to use the FILTER > RENDER > LIGHTING EFFECTS. Why is this? Also, My eraser brush disappears after working on multiple files.
View 1 Replies View RelatedWhen I use filter/render/lighting effects, it freezes my program.
View 1 Replies View RelatedI recently upgrade from PSE 9 to PSE 12. I like the difference in the user interface but cannot find Lighting Effects in Filter/Render.
View 3 Replies View RelatedI'm creating 3D architectural models; primarily interior views. I use the ANIPATH command quite frequently and I'm good there.
However, I have not been able to render a still camera view that shows the lighting and resultant shadows. Whenever I attempt to render a still from a particular camera; I set it to realistic. It shows the 3D objects with materials; however not the lighting.
I've been using ACAD for about 15 years now, and consider my skill level upper-intermediate.
So far, the only successful still renderings I've been able to do are those directly associated with the typical ortho views: i.e., NE, NW, SE, SW, front, back, etc. But no avail on rendering from the camera point of view.
i'm in action schematic and if i reset any node (for example images/surface) then some parameter is still not affected. For example : the blend type and surface type and couple more are not affected by that reset function. Is this a bug ?
View 3 Replies View RelatedI keep getting a dialogue box that says "Revit was unable to render the view due to an unknown error during render calculations. The rendering operation will be canceled." The only option is to click "close" and when i do so, it continues to render but only the sky and grass. My buildings are not present.
View 2 Replies View RelatedThe same scene, same settings, produce 2 very different outputs in max 2011 and 2012, render to texture for normals is currently useless in max 2012.
The blue one is a correct tangent normal map created from a sphere in max 2011, the colored one is the the one created inside max 2012 from the same objects and settings, and the last is another sample of normals generated in max 2012.
I have created a 3d model of a football stadium, but when I try to render it, it comes up with this message and it cannot render the scene. I've tried everything I can to fix it, but nothing has worked.
View 9 Replies View RelatedEach time I want to have batch render with 4 camera views. I thought it would provide me with elements along with it. But it just brings me only one file as I set .png.
I know it works with State Set by changing camera view. But Batch render should work too.
I can´t believe it. Save 50% Rendertime. Fix the Render Elements Bug with Render Optimizer V3! deactivate "contrast all Buffers" with RO V3, and you have the same speed as Vray Renderelements.2014 can comming! URL....
View 3 Replies View RelatedOkey, so I want to render a normal map directly from render production. Pretty much like the Viewport Filter "Normal map" in Mudbox. Can this be done? And I also want to make clear that I do not want to use "render to texture". I dont want to do any projection against an other mesh, I want to do it directly to the camera.
View 2 Replies View RelatedYesterday Ae was working perfectly. Today, Ae will not render compositions in the render queue or in AME? If I try to render from Ae,I get this error message:
and I can fin nothing about this error anywhere on line.
Is it possible to render an object to fit exactly into the render window. i.e If I have a plane object segmented into 512 * 512 segments and I randomly colour each polygon. If I render at 512*512 pixels, I would like to fit the plane exactly so that the rendered image shows 1 pixel per polygon.
Whilst you can select region to render its not that exact and is based on the visual window. can it be utilized with render blowup.
Basically I want to render a square object exactly ( no borders) at a large resolution, hence the need for render blowup so that I can render into smaller tiles.
So the gizmo that pops up whenever you select an object to move, scale, or rotate has gone into some default mode. I can't move things manually on the z axis, and when I scale objects, it only makes them bigger or smaller to what its original shape was. Trying to figure out what I pressed to cause this, but I am not sure what it was and I don't want to make things worse.
View 2 Replies View RelatedI've been messing up with 3ds max and accidently f****d up my top view port, is there a way I could reset it to default?
View 5 Replies View RelatedI used to know how to reset the tools and settings but is is no longer working for me. I mean holding down the Alt, Ctrl, and Shift. Do you have to do it at the program start. I'm trying to add better photos to my site. Instead of just stock photos. Here it is, my site.
View 2 Replies View RelatedSomehow my X and Y are set to 2412.14 and 4868936255!!!
I have tried to reset these to 0,0 but to no avail.
i change the default setting of my brush tool palette now i want to use brush of grass shape,but i don't know how to get it back,i want my defult brush tool palatte setting back,
View 4 Replies View RelatedI seem to be having some issues using symmetry. The front of the model is on the lower screen. I am trying to mirror it on the x axis. Anyway nothing works. Is there a way to reset the position of the model to 0 so I can sym it ?
View 3 Replies View RelatedI am new to AutoCAD and am trying to self teach myself using the autocad bible as a reference. I am on chapter 3 and was following the suggestions for moving the ribbon by undocking it. Great, but now I can't get it back to the top where it started. It moves left and right just fine. I tried undo 100, no luck. I tried restarting my computer but it has now transfered to all of my practice drawings as well, all have the ribbon on the side.
View 4 Replies View RelatedIs there a button or easy way to reset the tools in AI CS6 without exiting the program? Specifically the Star tool.
View 2 Replies View RelatedI'm using a reset at the top of my css but still getting a total of 20 px added to width and height of all my edge comps when I place the oam file in my html. My xml file says the dimensions of my file are 202x434 but they appear to be picking up 20 pixels for width and height somewhere.
I could change this manually but I'd like to know where it is ppicking up those extra pixels so I can take care of it now rather than wonder why something isn't working correctly down the line. I have a resets that puts 0px for margin, border, padding on all tags.URL...