I'm trying to model a ceiling mounted arm system with the possibility to change arm lengths and angles.
My problem: I have a box with a cylinder attached to it. No problems there. Then I have another box which is the first arm of the system. I want the arm to move when I change the length of the cylinder so that the arm is always connected to the cylinder and the cylinder always connected to the other box.
I want to create a segmented polyline with known angles / lengths, but I want to do this in 1 operation without having to copy/rotate/chamfer etc.
I'm sure it has something to do with UCS, but I've not used it in quite some time, I am stumped and everything I have tried so far has failed.
I have a problem. The linked model from our electrical engineer its lights are at the correct height but the ACT ceiling is still running its lines throiugh the lights. how do we take care of this to where the linked model which has the lights in it cut through our ACT ceiling from our central model?
View 2 Replies View RelatedHow to model these lamps and curtains(hung from ceiling) made of threads. I am particularly interested in how to model these to look like natural threads as realistic as the picture.
See the image attached.
I need to create an axonometric view of a model with specific angles (see attached). What is the best and quickest way to do this?
View 4 Replies View RelatedHow We can to change the default height Ceiling plane In Project Browser.
For example, the Default is 2600mm.
I want to Over 2800mm set.
Not in Time Drawing Ceiling.
I recently built a model-in-place generic model ceiling canopy using Revit 2013. I want to place lights (recessed cans) in the model. Can I change the model type to ceiling or is there a way to place light fixtures in it?
View 2 Replies View RelatedI have a modell that is made with the system scale set to mm, and try to merge the modell in to a scene with the system scale set to m. The merged modell appear 100 times bigger than it should.
Is there a little trick for this?
How to make this sort of glass wall mounted plaque: [URL]....
View 3 Replies View RelatedWhen I zoom in or zoom out the model, normally the dimension will follow the model too.But now in Autocad 2013, even the model size change, the dimension still remain unchange. why? Is there any setting I miss out? URL....
View 2 Replies View RelatedI'm trying to model the under drain system of a synthetic turf field in Hydraflow.
View 1 Replies View RelatedMac OS 10.6
Illustrator CS6
Illustrator CS6 hangs (spinning beach ball) when saving files to the computer's local HD while having multiple server share points mounted.
I am NOT opening or saving the file to or from a server. The server is mounted so that I can move my saved file to it once complete.
Unmounting the servers fixes the problem and Illustrator CS6 returns to being normal (not causing a spinning beach ball).
This is repeatable, not intermittent.
How do I change the lineweight system variable
Pressing the command button puts <Lineweight > in the command line.
The last problem I had to search for was to change lineweights
br.LineWeight = 0.35
should be:
br.LineWeight = LineWeight.LineWeight035
I upgraded to a new MB & CPU. The CPU is 3.20 gigahertz AMD Phenom II X4 955 quad core. Do I need to to anything in the preferences to get full use of the new setup?
View 1 Replies View RelatedShe works with a version of creative suite on operating system MS.DOS
Now she has got an apple computer. Can she install the program and open with the current Product Key?
My data is in decimal format and
In metric I am geting the feet interval of contours
How to change the feet to decimal system
I am having a problem with creating a curtain wall system. After selecting my mass surfaces and choosing "create system" I am unable to change the type of curtain wall system. It just comes up with a regular grid system on the mass, where as before I was able to choose triangles, rhomboids etc under the properties tab. Now however I see nothing except for the current curtain system and recently used files.
I have also created a custom panel which I want to insert into my project but am unable to do so? I have tried loading it into the project, however because of the above problem I am not able to change it to my custom panel system.
I have some trouble with my coordinate system, it doesn't work like i want it to do...
This is how it's now:
Sketchplane = YX(+Z)
Sketchplane view = Front
Groundplane = ZX(+Y)
Groundplane view = Bottom
Home view = Front(up), Bottom, Right
But I want it to be like this:
Sketchplane = YX(+Z)
Sketchplane view = Top
Groundplane = YX(+Z)
Groundplane view = Bottom/Top
Home view = Top(up), Front, Right PERMANENT!!!
How to do?
When i open my psd file it says that the some text layers might need to be update. When i press the update button i get the message "Selected font failed during last operation. If problem persists, please disable the font". If i click "no" the file opens, but all text layers has a exclamation mark and a tooltip that says "font is present on system but requires a layout change"
I have create the PSD file using the trail version of Adobe Photoshop CS6 (downloaded from adobe.com). That trail has expired so i have just purhased Photosop CS 6 (from adobe.com). Before installing the version i purhased, i uninstalled the trail version.
I dont understand this. It the same computer and the font is a system font that comes with the OS (Windows). I cannot create any new text layers.
If a create a new PSD file i get the same message ""Selected font failed during last operation. If problem persists, please disable the font" when ever i try create a text layer.I have installed all updates.
When I make a part in Frame Generator, by default it will name the part a big lengthy name like "frame 000001 etc etc". Is there any way that I can change the default naming system and include parameters in the name (the parameters is not necessary, but would be useful).
ALSO, if I name 2 parts the same name will it show up as "QTY 2" in my parts list?
using mac os I need to change my scratch disc from the default "system" to an external drive.
In preferences> scratch discs it sees the hard drive i have attached...so i choose it, I click ok and get the usual warning about having to restart illustator to implement the change. problem is, when i quit, then restart illustrator, no dice. it's defaulted back to " system". I change it again. click ok. then, just to see, i re- open the preference panel. it's already gone back to " system". what gives? i've tried over and over and it just wont take.
Is it possible to change the system variable "TEXTSIZE" with an autolisp routine? I have hundreds of drawings that have varying textsize settingings and I can't get it to let me change it, unless I go into "Style" and manually change the value to "0" before I run the routine, and there are simply too may drawings to do that everytime. So, is there a way to reset the textsize to 0 through Lisp?
View 5 Replies View RelatedI have had Window 7 64 bit operating system put on my computer.Will I get the benefits of additional Ram on Photoshop CS6 Extended?
View 1 Replies View RelatedI only started using MAX for a week now and I am an architect. I am trying to use 3D Max to model buildings. Often I want to input specific parameters. My first question is:
1) Within the Create>AEC Extended> Walls object....how do you specify the lengths of the walls? In autocad its quite simple whereby you establish an origin, then move your cursor to the direction of the next wall segment, input the number, and the new wall segment is created, and so on.
I am basically looking for a way to get the length of each polylie segment in the overall polyline. Not the total length.
I then need to comapre these lengths. I guess I could do some math to get the values of the verticies, but is there a built in method to do this? how to get started?
I'm having a minor issue with one of my drawings. The existing drawing was a .hln file that I have opened in AutoCAD 2011 LT.
I tried to draw a line of length 1600mm but when I take a dim it's only 145mm but via properties its 1600mm. The drawing is attached zoomed-in on issue area.
How i'm adding lengths of individual plines...I am running MEP 2013 and lately we've been doing a lot of measuring of plines...The problem i'm having is that we are supposed to add 24' to every length...So if I measure a polyline and it's 10' long, the number i'm supposed to be putting on the drawing would be 34'...Is there a way to create a command that will automatically add what I need to every pline?
View 9 Replies View RelatedI am working on a project using polygons—a pentagon, specifically—and I want all of the sides to be 2 in. The radius doesn't matter to me. I can't figure out if there is any way to do this. I am using CS5.
View 23 Replies View RelatedI'm using autocad 2007:
I draw a detail 1 in model space and put dimensions on it say at a overall scale of 1.00, now I draw a detail 2 and change the overall scale to 5.00 and put dimensions on that detail but when I look at detail 1 all my dimension have changed to the 5.00 scale. Where I'm changing the scale is under the tab Format/Dim. Style/Modify/Fit/use overall scale of ..... How can I keep the dimensions from changing when I change the scale this way? I know it can be done because I've work on several dwgs. and changing the overall scale doesn't change on every detail in the model space.
Is there an easy way to change all the model geometry from New to Existing in one easy command? I drew a three story building complete with structural columns, beasms, curtain walls, doors, walls, floors, etc. and I need to now make it all 'Existing'.
View 3 Replies View RelatedWhen I use slice command in a 3D model, after separation into two parts, each part can't editable, you can only move them.
You can see in arrows on # 1 and # 2 3D model, but after using separate into it two parts by slice command , these arrows are disappeared.
How can I see arrows again to change dimensions of 3D model easily?
I hope that you can understand what I mean. [URL]....