AutoCAD Inventor :: Change View Of Coordinate System?

Feb 17, 2013

I have some trouble with my coordinate system, it doesn't work like i want it to do...

This is how it's now:

Sketchplane = YX(+Z)
Sketchplane view = Front
Groundplane = ZX(+Y)
Groundplane view = Bottom
Home view = Front(up), Bottom, Right

But I want it to be like this:

Sketchplane = YX(+Z)
Sketchplane view = Top
Groundplane = YX(+Z)
Groundplane view = Bottom/Top
Home view = Top(up), Front, Right PERMANENT!!!

How to do?

View 3 Replies


ADVERTISEMENT

AutoCAD .NET :: Blockreference Position And View Coordinate System?

Aug 5, 2013

I have rotated my view about 15 degress (just for this example).Now I prompt user to select the point, which is also an insertion point of the block.

So we have:

- selected point: X=0, Y=294, Z=0;

- insertion point of the block: X=0, Y=294, Z=0

(this is what I have in properties list or when I execute LIST command).

Now in my

ed.WriteMessage("
Base X: " + basePoint.X.ToString()); ed.WriteMessage("
Base Y: " + basePoint.Y.ToString()); ed.WriteMessage("
Block X: " + blkRef.Position.X.ToString()); ed.WriteMessage("
Block Y: " + blkRef.Position.Y.ToString());

 This gives me:

Base X: -2.89976376244283E-14 - OK
Base Y: 294.058394637539 - OK
Block X: -76.1079129044681 - BAD
Block Y: 284.038597817502 - BAD

My question - why blockReference position is different that it should be?

View 2 Replies View Related

AutoCad :: Image Set In One Coordinate System Into A Drawing In Another Coordinate System

Mar 14, 2012

how do i get an image set in one coordinate system come into a drawing in another coordinate system?

View 3 Replies View Related

AutoCAD VB :: OCS Coordinate System Of Block To UCS Or WCS Coordinate System?

May 28, 2012

I want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .

It's Block's OCS   Coordinate  not other objects.

View 7 Replies View Related

AutoCAD Inventor :: Edit Coordinate System

Apr 1, 2003

How are we suppose to do a simple rotation around the y axis ( like a mirror of the sketch ). I think that I have pick every single line in my ipt but inventor can't show me what I want.

View 8 Replies View Related

AutoCAD Inventor :: Orienting Sketch Coordinate System

Sep 30, 2013

I try to reposition the origin of the coordinate system of a sketch with the pop up menu, on the RMB.

I position it correctly, then press enter-nothing happens. i RMB and select OK, and when i check again-the coordinate system remained in it's previous state. I did it a few times with 2 sketches and gave up

View 2 Replies View Related

AutoCAD Inventor :: Sketch Redefine Coordinate System?

Aug 6, 2012

When ever I want to change the sketch plane for a already finished sketch, I use rmb, redefine and choose new plane/ planar face.

Why does the sketch position change from the original coordinate point when redefined to new plane?

Inventor Professional 2013
Vault Collaboration 2013

View 1 Replies View Related

AutoCAD Inventor :: Move Part Coordinate System?

Mar 14, 2012

Using Inventor 2012

I have parts inported from stp-files, now the coordinate system is different in all these parts.

How do I re-define the coordinate system to my needs in these imported parts.

View 6 Replies View Related

AutoCAD Inventor :: Redefining Main Coordinate System

Aug 7, 2012

I am creating a model for CFD analysis, but I accidentally oriented the entire model and assembly the wrong way--Is there any way to reverse the direction of the +z axis?

View 2 Replies View Related

AutoCAD Inventor :: Edit Sketch Coordinate System

Jan 27, 2012

I have had several sheet metal parts return error messages to edit the sketch coordinate system after the part has been modified. This usually pertains to a dimensioning drawing made to the flat pattern. I have found how to edit the coordinate system, but I don't know what to edit it to. If I select the center point I can drag it from where it sits to an existing corner and select done but that seldom resolves the issue. What is Inventor looking for? I sometimes get a message asking if I want to edit the axis as well but what to do there.

Why can't these sketches orient off the center point that is already in the model? If it would stay put I could dimension to it and be done but it has to twist and turn the model and then put the point on some corner, not usually where I would like it and then I get these errors if I alter the model later.

View 1 Replies View Related

AutoCAD Map 3D :: Saving Map Coordinate System?

Jun 11, 2013

saving the 'Map Coordinate System' on a specific drawing? - For example, I need to use Coordinate System MGA-55 when working on an Australian Project, and UTM84-39N when working on a Kazakh Project, however, if I set my coordinate system to MGA-55, then save my drawing, the Coordinate system resets to UTM84-39N when I reopen the same drawing (it appears not to be saved with the drawing). I'm Using 'AutoCAD Map 3D 2012 (64bit) running on Windows 7.

View 2 Replies View Related

AutoCAD Map 3D :: DEM - Assign Coordinate System

Aug 15, 2012

I'm using Map3D & Raster Design 2012.

I have connected to some SRTM DEM data, but the resulting terrain and contours I generated are not showing properly. Specifically, the map area is stretched out of shape (too wide L & R). I seem to recall it had to do with setting the proper "define coordinate system" option for the file.

View 2 Replies View Related

AutoCAD Map 3D :: What Is Best Coordinate System For Map Insertion

Sep 27, 2011

Im on a project including inserting an FAA sectional map and plotting new points on top of it.  Im trying to setup the coordinate system right now before i import the data and i dont see an option that matches the map exactly.  Im including the information from the metadata file included with the geotiff.  

Bounding_Coordinates:
West_Bounding_Coordinate: -94.175741 East_Bounding_Coordinate: -84.616261 North_Bounding_Coordinate: 44.589505 South_Bounding_Coordinate: 42.107198 Ellipsoid_Name: Geodetic Reference System 80
Map_Projection_Name: Lambert Conformal ConicLambert_Conformal_Conic:
Standard_Parallel: 46.666667 Standard_Parallel: 41.333333 Longitude_of_Central_Meridian: -89.000000 Latitude_of_Projection_Origin: 42.666667 False_Easting: 0.000000 False_Northing: 0.000000

View 5 Replies View Related

AutoCAD Civil 3D :: Add A Coordinate System?

May 23, 2012

How do I add my own system in Civil3d? We have a little strange system here with a deformation model, but I suggest that isn't a problem.

View 2 Replies View Related

AutoCAD .NET :: Coordinate System Extraction

Apr 26, 2012

How can I extract coordinate system of a autocad Map dwg file by using C#. I have to use this information to set the coordinate system of other drawing.

View 1 Replies View Related

AutoCAD .NET :: How To Set Global Coordinate System

Oct 22, 2009

The following code works for querying the global coordinate system of a drawing

Dim Current1 As Autodesk.Gis.Map.MapApplication
Current1 = Autodesk.Gis.Map.HostMapApplicationServices.Application
Dim Proiect1 As Autodesk.Gis.Map.Project.ProjectModel
Proiect1 = Current1.ActiveProject
MsgBox(Proiect1.Projection.ToString)

The following line of code doesn't work

Proiect1.Projection = "UTM83-12"

On vb.net gives this: "Exception of type ‘Autodesk.Gis.Map.MapException was thrown."

In Autocad gives this error: "Cannot save projection code to the drawing"

The error log is:

<?xml version="1.0" ?>
- <Map3dErrorLog xmlns:xsi=[URL]... xsi:noNamespaceSchemaLocation="AcMap3dErrorLog.xsd">

- <Session user="dpopescu" start="10/22/2009 7:22:56 AM" document="Drawing1.dwg">

<Error code="1" type="2" dispensation="1" sId="2" occurrence="1">Cannot save projection code to the drawing.</Error>

</Session>
</Map3dErrorLog>

View 5 Replies View Related

AutoCAD LT :: Block Coordinate System?

Oct 3, 2011

When I click on a block in my drawing the properties bar shows "position x" and "position y" but these coordinates do not match up at all with the x,y coordinates shown in the bottom left corner of the screen. For example, my cursor over the block is at about 370000,4900000 but the block position is 170000, -140000. Is there a different coordinate system the block position is referring to?

View 3 Replies View Related

AutoCAD Inventor :: Missing View Cube / Coordinate Axis - Sketch Doesn't Display

Sep 14, 2013

I just installed a student version of Inventor Pro on my comptuer.  I have used this and several other similar software packages before.  My problem:  when I open a new part file, it takes me to a gray screen.  No coordinate axes, view cube, nothing.  When I click "Create 2D Sketch," still nothing.  Same gray screen.  If I draw a line, it doesn't show anything.

I've gone to View -> Object Visibility, and everything seems to be checked off as it should be.  I've also clicked User Interface, and it shows the View Cube among other things as being selected.

The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?

View 6 Replies View Related

AutoCAD Civil 3D :: Coordinate System Variable

Sep 2, 2013

I want to have a piece of text added to the drawing notes that uses a field (or similar), to list the coordinate system code assigned to the drawing, i.e. UTM83-12.

Any setvar or something that I can use?

There are load of different coordinate systems to choose from, and I don’t want to have to manually enter it for every drawing.

View 9 Replies View Related

AutoCAD Civil 3D :: DWG Coordinate System Transformation?

Nov 20, 2012

My group is trying to convert a dwg from one coordinate system to another. The original drawing contains points, blocks, etc. in 1 system and we need it in a different one. We tried attaching the dwg to a new map with the new system using a layer query, but this did not appear to bring in the objects into the new system.

"Structures" is in the original system (OR83-NF), "StructuresHarn" is in the desired system (ORHP-NIF)

P.S. C3D 2011
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1

View 2 Replies View Related

AutoCAD Map 3D :: Defining A Global Coordinate System

May 18, 2009

Using Map 2008

When I click Setup->Define Global Coordinate System...

I recieve the following message:

Cannot open coordinate system dictionaries for write.

I attempt to define the CS in Map 2009 and am able to supply all required information.

When I click OK I recieve the following message:

Cannot add coordinate system to dictionary.

Is this information still stored at:

C:Program FilesCommon FilesAutodesk SharedGISCoordSys?

View 5 Replies View Related

AutoCAD Map 3D :: Setting Up Coordinate System / Geo-Referencing

Aug 14, 2012

I have an Map that was drawn in regular autoCAD drawn 1:1.  I know the coordinate system that I need to assign to it and some known coordinate but how to I go about getting my current map to be correctly Geo-referenced.  

Is there a way to tell AutoCAD map that a certain few points are at certain coordinates, and the rest falls into place?  

View 4 Replies View Related

AutoCad 2D :: Rotating UCS Icon / Coordinate System?

Sep 9, 2011

I received a drawing from a designer some time ago showing the UCS Icon rotated so that the building / structure on the drawing was square to the screen but the original coordinate system was also maintained. How to do this as I often have to rotate drawings to suit a particular site coordinate system and then have to view the drawing at an angle on the screen rather than square on. With irregular shaped buildings or structures it is not so important but for most buildings it would be useful to look at the plan the way it was drawn so as not to give myself a crick in the neck!

View 6 Replies View Related

AutoCAD Civil 3D :: Coordinate System Conversion?

Feb 16, 2012

I am trying to convert point data from NAD83 State Plane Coordinates to UTM coordinates. 

View 3 Replies View Related

AutoCAD .NET :: Changing Coordinate System Into UTM83-10F

Aug 14, 2012

I am having some drawings in CA-III Coordinate system and i want to change them in to UTM83-10F.

How can i handle this in .net.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Show Coordinate System

Mar 2, 2012

How can I show coordinate on Civil 3D? I inserted a map from Google earth and I want the coordinate to be there. 

Civil 3D 2012 SP1
8 GB Ram
i7-2630 @ 2.0 GHz
64 Bit Window 7 OS

View 9 Replies View Related

AutoCAD Civil 3D :: Write New Category Of Coordinate System

Apr 13, 2012

I am a new user of civil 3D 2012. How to write a new coordinate category in my computer.

I am using a 64 bit windows 7 and everytime I attempt to write a new coordinate system category it always display the words " no access to write to the dictionary".

View 3 Replies View Related

AutoCAD Map 3D :: Creating Workflow -> Assign Coordinate System

Dec 23, 2013

We're looking into the "Workflow" system in Map3d.One of our most common tasks is to Set the coordinate system and then add a georeferenced image (such as a SID file).

I'd like to create a workflow that will do this -- but I'm having trouble figuring out how to get it to set the coordinate system.  I will eventually need to tell the image what coordinate system to use (we normally have to edit that manually).

View 8 Replies View Related

AutoCAD .NET :: How To Use Set System Variable Setting Coordinate Values

Apr 5, 2013

I have a problem setting sysvar like SNAPBASE, which requires 2d point or 3d point. I always get wrong input for the following lines.

double[] point = new double[2] {5,5};            
object value1 = point;
Application.SetSystemVariable("SNAPBASE", value1);

what value should I give a 2d point or 3d point?

View 2 Replies View Related

AutoCAD Civil 3D :: Convert Points To Another Coordinate System?

Apr 22, 2013

I have Points in Civil 3D that are in the Washington State South Zone NAD 83 Coordinate System and would like to get these points converted to Washington State North Zone NAD 83 Coordinate System. I am able to convert drawings entities to the new coordinate system using MAPEXPLORER but the points do not go with it.

View 4 Replies View Related

AutoCAD Map 3D :: Coordinate / Projection System Info Did Not Install

Sep 16, 2011

Installed 2012 Map and went to assign the projection, and nothing was available, Reinstalled, No Change...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved