AutoCad 2D :: Rotating UCS Icon / Coordinate System?
Sep 9, 2011
I received a drawing from a designer some time ago showing the UCS Icon rotated so that the building / structure on the drawing was square to the screen but the original coordinate system was also maintained. How to do this as I often have to rotate drawings to suit a particular site coordinate system and then have to view the drawing at an angle on the screen rather than square on. With irregular shaped buildings or structures it is not so important but for most buildings it would be useful to look at the plan the way it was drawn so as not to give myself a crick in the neck!
View 6 Replies
ADVERTISEMENT
Mar 14, 2012
how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies
View Related
May 28, 2012
I want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .
It's Block's OCS Coordinate not other objects.
View 7 Replies
View Related
Jun 11, 2013
saving the 'Map Coordinate System' on a specific drawing? - For example, I need to use Coordinate System MGA-55 when working on an Australian Project, and UTM84-39N when working on a Kazakh Project, however, if I set my coordinate system to MGA-55, then save my drawing, the Coordinate system resets to UTM84-39N when I reopen the same drawing (it appears not to be saved with the drawing). I'm Using 'AutoCAD Map 3D 2012 (64bit) running on Windows 7.
View 2 Replies
View Related
Aug 15, 2012
I'm using Map3D & Raster Design 2012.
I have connected to some SRTM DEM data, but the resulting terrain and contours I generated are not showing properly. Specifically, the map area is stretched out of shape (too wide L & R). I seem to recall it had to do with setting the proper "define coordinate system" option for the file.
View 2 Replies
View Related
Sep 27, 2011
Im on a project including inserting an FAA sectional map and plotting new points on top of it. Im trying to setup the coordinate system right now before i import the data and i dont see an option that matches the map exactly. Im including the information from the metadata file included with the geotiff.
Bounding_Coordinates:
West_Bounding_Coordinate: -94.175741 East_Bounding_Coordinate: -84.616261 North_Bounding_Coordinate: 44.589505 South_Bounding_Coordinate: 42.107198 Ellipsoid_Name: Geodetic Reference System 80
Map_Projection_Name: Lambert Conformal ConicLambert_Conformal_Conic:
Standard_Parallel: 46.666667 Standard_Parallel: 41.333333 Longitude_of_Central_Meridian: -89.000000 Latitude_of_Projection_Origin: 42.666667 False_Easting: 0.000000 False_Northing: 0.000000
View 5 Replies
View Related
May 23, 2012
How do I add my own system in Civil3d? We have a little strange system here with a deformation model, but I suggest that isn't a problem.
View 2 Replies
View Related
Apr 26, 2012
How can I extract coordinate system of a autocad Map dwg file by using C#. I have to use this information to set the coordinate system of other drawing.
View 1 Replies
View Related
Oct 22, 2009
The following code works for querying the global coordinate system of a drawing
Dim Current1 As Autodesk.Gis.Map.MapApplication
Current1 = Autodesk.Gis.Map.HostMapApplicationServices.Application
Dim Proiect1 As Autodesk.Gis.Map.Project.ProjectModel
Proiect1 = Current1.ActiveProject
MsgBox(Proiect1.Projection.ToString)
The following line of code doesn't work
Proiect1.Projection = "UTM83-12"
On vb.net gives this: "Exception of type ‘Autodesk.Gis.Map.MapException was thrown."
In Autocad gives this error: "Cannot save projection code to the drawing"
The error log is:
<?xml version="1.0" ?>
- <Map3dErrorLog xmlns:xsi=[URL]... xsi:noNamespaceSchemaLocation="AcMap3dErrorLog.xsd">
- <Session user="dpopescu" start="10/22/2009 7:22:56 AM" document="Drawing1.dwg">
<Error code="1" type="2" dispensation="1" sId="2" occurrence="1">Cannot save projection code to the drawing.</Error>
</Session>
</Map3dErrorLog>
View 5 Replies
View Related
Oct 3, 2011
When I click on a block in my drawing the properties bar shows "position x" and "position y" but these coordinates do not match up at all with the x,y coordinates shown in the bottom left corner of the screen. For example, my cursor over the block is at about 370000,4900000 but the block position is 170000, -140000. Is there a different coordinate system the block position is referring to?
View 3 Replies
View Related
Sep 2, 2013
I want to have a piece of text added to the drawing notes that uses a field (or similar), to list the coordinate system code assigned to the drawing, i.e. UTM83-12.
Any setvar or something that I can use?
There are load of different coordinate systems to choose from, and I don’t want to have to manually enter it for every drawing.
View 9 Replies
View Related
Nov 20, 2012
My group is trying to convert a dwg from one coordinate system to another. The original drawing contains points, blocks, etc. in 1 system and we need it in a different one. We tried attaching the dwg to a new map with the new system using a layer query, but this did not appear to bring in the objects into the new system.
"Structures" is in the original system (OR83-NF), "StructuresHarn" is in the desired system (ORHP-NIF)
P.S. C3D 2011
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
View 2 Replies
View Related
Apr 1, 2003
How are we suppose to do a simple rotation around the y axis ( like a mirror of the sketch ). I think that I have pick every single line in my ipt but inventor can't show me what I want.
View 8 Replies
View Related
May 18, 2009
Using Map 2008
When I click Setup->Define Global Coordinate System...
I recieve the following message:
Cannot open coordinate system dictionaries for write.
I attempt to define the CS in Map 2009 and am able to supply all required information.
When I click OK I recieve the following message:
Cannot add coordinate system to dictionary.
Is this information still stored at:
C:Program FilesCommon FilesAutodesk SharedGISCoordSys?
View 5 Replies
View Related
Aug 14, 2012
I have an Map that was drawn in regular autoCAD drawn 1:1. I know the coordinate system that I need to assign to it and some known coordinate but how to I go about getting my current map to be correctly Geo-referenced.
Is there a way to tell AutoCAD map that a certain few points are at certain coordinates, and the rest falls into place?
View 4 Replies
View Related
Feb 16, 2012
I am trying to convert point data from NAD83 State Plane Coordinates to UTM coordinates.
View 3 Replies
View Related
Aug 14, 2012
I am having some drawings in CA-III Coordinate system and i want to change them in to UTM83-10F.
How can i handle this in .net.
View 1 Replies
View Related
Mar 2, 2012
How can I show coordinate on Civil 3D? I inserted a map from Google earth and I want the coordinate to be there.
Civil 3D 2012 SP1
8 GB Ram
i7-2630 @ 2.0 GHz
64 Bit Window 7 OS
View 9 Replies
View Related
Sep 30, 2013
I try to reposition the origin of the coordinate system of a sketch with the pop up menu, on the RMB.
I position it correctly, then press enter-nothing happens. i RMB and select OK, and when i check again-the coordinate system remained in it's previous state. I did it a few times with 2 sketches and gave up
View 2 Replies
View Related
Apr 13, 2012
I am a new user of civil 3D 2012. How to write a new coordinate category in my computer.
I am using a 64 bit windows 7 and everytime I attempt to write a new coordinate system category it always display the words " no access to write to the dictionary".
View 3 Replies
View Related
Dec 23, 2013
We're looking into the "Workflow" system in Map3d.One of our most common tasks is to Set the coordinate system and then add a georeferenced image (such as a SID file).
I'd like to create a workflow that will do this -- but I'm having trouble figuring out how to get it to set the coordinate system. I will eventually need to tell the image what coordinate system to use (we normally have to edit that manually).
View 8 Replies
View Related
Aug 6, 2012
When ever I want to change the sketch plane for a already finished sketch, I use rmb, redefine and choose new plane/ planar face.
Why does the sketch position change from the original coordinate point when redefined to new plane?
Inventor Professional 2013
Vault Collaboration 2013
View 1 Replies
View Related
Aug 5, 2013
I have rotated my view about 15 degress (just for this example).Now I prompt user to select the point, which is also an insertion point of the block.
So we have:
- selected point: X=0, Y=294, Z=0;
- insertion point of the block: X=0, Y=294, Z=0
(this is what I have in properties list or when I execute LIST command).
Now in my
ed.WriteMessage("
Base X: " + basePoint.X.ToString()); ed.WriteMessage("
Base Y: " + basePoint.Y.ToString()); ed.WriteMessage("
Block X: " + blkRef.Position.X.ToString()); ed.WriteMessage("
Block Y: " + blkRef.Position.Y.ToString());
This gives me:
Base X: -2.89976376244283E-14 - OK
Base Y: 294.058394637539 - OK
Block X: -76.1079129044681 - BAD
Block Y: 284.038597817502 - BAD
My question - why blockReference position is different that it should be?
View 2 Replies
View Related
Apr 5, 2013
I have a problem setting sysvar like SNAPBASE, which requires 2d point or 3d point. I always get wrong input for the following lines.
double[] point = new double[2] {5,5};
object value1 = point;
Application.SetSystemVariable("SNAPBASE", value1);
what value should I give a 2d point or 3d point?
View 2 Replies
View Related
Apr 22, 2013
I have Points in Civil 3D that are in the Washington State South Zone NAD 83 Coordinate System and would like to get these points converted to Washington State North Zone NAD 83 Coordinate System. I am able to convert drawings entities to the new coordinate system using MAPEXPLORER but the points do not go with it.
View 4 Replies
View Related
Sep 16, 2011
Installed 2012 Map and went to assign the projection, and nothing was available, Reinstalled, No Change...
View 2 Replies
View Related
Mar 27, 2007
Here at work we are have one computer that has some user defined coordinate systems on it, and we are needing to place these coordinate system files onto another computer so we can project some of our drawing files correctly.
What do we need to do in order to move these files from one computer to the next? What do we need to export?
View 4 Replies
View Related
Apr 29, 2013
When I insert a location in CAD2014, there is a dialog for me to chose the position, the default coordinate is WGS84, and of couse there is a list for options. but if there still have no system I need. how can I add the one into this list ?
View 4 Replies
View Related
Mar 22, 2011
I have acsii data that I need to add to a map. My coordinate system for the map is CANA83-3TM114
The coordinate system for the ascii points are unknown. How do I transform the data to the same coordinate system as my map?
View 3 Replies
View Related
Nov 5, 2013
We are having a bit of a debate in our office. When you are working on civil engineering project where you are recieving files form Architects and Landscape Architects, and sending out "Dumbed Down" AutoCAD files to folks who don't have Civil3d, do you change your Civil3d Coordinate System to survey feet & specify your state plane coordinate system?
View 1 Replies
View Related
Feb 20, 2013
I have created a custom coordinate system in AutoCAD Civil 3D 2012 using MAPCSCREATE command. My issue go figure is I created it incorrectly and now I want to delete it out of the system.
View 2 Replies
View Related
