I have a modell that is made with the system scale set to mm, and try to merge the modell in to a scene with the system scale set to m. The merged modell appear 100 times bigger than it should.
Is there a little trick for this?
how do I merge nodes from other .max files and get the selectiosets as well?
View 7 Replies View RelatedI am trying to merge a unit of furniture into my scene. The unit of furniture is a MAX file.
When the MAX is imported the object is read only. Why is this? Surely only XREFs and File Linked entities should be read only?
I want to modify the imported 'Merged' MAX entity.
System information: Win7 x64 / 3DSMax Design 2014 SP3 / AutoCad 2014 SP1 Lenovo E30 ThinkStation Xeon E31225 Quadcore @3.10Ghz PNY GTX760 XLR8 2GB (334.89 Driver) 24Gb Ram Corsair 650w PSU
When I merge geometry into a scene that is already using the same materials, it prompts me what I want to do. I always select "Use scene materials"...however, whenever I look at the slate, it shows duplicates all over the place. To keep mat library optimized becomes a task when you are dealing with a lot of materials.
Why does MAX not listen to me when I tell it to use the scene materials that have matching names?
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
What is a good way to merge references back into a scene to upload to render farm?
View 2 Replies View RelatedA while ago I thought I saw in a tutorial the ability to merger materials from another scene without merging the geometry. I have dug around a bit but can't figure out how to do this, or if it's even possible.
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
I do have a scene with CAD data in it, some of it is collapsed to poly some of it is left as mesh. Now i want to import this data to a scene with a different scale. When doing so, some parts of the object become very large while others shrink to minimum. Only a few parts stay at the correct position. These follwing steps I tried to correct the problem:
- Linking everything to a Helper = FAIL
- Attaching everything to one Object = NOT AN OPTION
- Collapsing everything to Poly or Mesh = Fail
- Grouping = FAIL
Is there anything else i could try to get this dam file merged? Like a Pivot Point Reset to World? Match Scale Pivot Reset...
I would like to compute a scale of scene based on data from dxf. I think, should use some data from VPORT like view height and lens length.
View 1 Replies View RelatedI am designing a piece of public sculpture for outdoors. I have photographs of the location and photographs of my little model. I now need to insert the photograph of the little model into the location photographs and make it look like it belongs there. So I need the inserted model to adopt the environmental effects of it's surroundings.
I'm using CS5.5
I have download building model in 3ds format, when i import the model into scene. the polygons of the model colliding each. what may be the problem. they have used very low mesh with lot of Boolean. how to recover this model or i have to create new? . i have attached the screen shot also.
View 3 Replies View RelatedNew when it comes to any kind of environment modeling, but I'm trying to make a simple landscape with grass and trees for a project.
I've got a nice ground plane and a simple grass plane with a texture applied from Photoshop. I was wondering if there is a way to paint instances of my grass object without manually duplicating and placing each individual blade of grass?
I have a maya designed animation model file (filename.ma) with 3000 frames. I want to split it into 3 maya scene files each of which have 1000 frames.
How can I do this in Maya 2012?
Im new to 3ds max design. when i want to merge 3d model like vase or plants into my 3ds max file,
the map file do not load together into 3ds file, the plant is grey color without mapping, but when i just open the plant model in new 3ds max file it got color.
Take a look at a sample diagram I've created for my company. I'm torn on what scale or even what units I should be using, since I am not drawing real objects. When I took an entry level class, it was so much easier doing the assignments because we used a scale that made sense based on what we were drawing.
5300_Room_Combination_reduced.pdf
I have modeled object from top and from profile. How can I merge these two views into one 3d model? I tried sweep and extrude but that didn't give any results . These are the top and profile view.
View 9 Replies View RelatedI was recently setting up a new install of Civil 3D 2012 and was going to set the default coordinate system to 3TM (CM=114°W) when I realized the scale factor was set to 1.0 at the central meridian.
It should be 0.9999. I checked some others and they are all the same. I also checked the 6TM projection and it is also set to 1 although it should be 0.9992
Below is the WKT(ESRI) out of Civil for EPSG code 3401:
PROJCS["CANA83-10TM115",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137.000,298.25722210]],PRIMEM["Greenwich",0],UNIT["Degree",0.017453292519943295]],PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",0.000],PARAMETER["False_Northing",0.000],PARAMETER["Scale_Factor",1.000000000000],PARAMETER["Central_Meridian",-115.00000000000000],PARAMETER["Latitude_Of_Origin",0.00000000000000],UNIT["Meter",1.00000000000000]]
Looking up the .PRJ for EPSG 3401, the published standard is:
PROJCS["NAD83 / Alberta 10-TM (Resource)",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137,298.257222101]],PRIMEM["Greenwich",0],UNIT["Degree",0.017453292519943295]],PROJECTION["Transverse_Mercator"],PARAMETER["latitude_of_origin",0],PARAMETER["central_meridian",-115],PARAMETER["scale_factor",0.9992],PARAMETER["false_easting",0],PARAMETER["false_northing",0],UNIT["Meter",1]]
Win 7 Enterprise SP1 64 bit
Intel i7 3770 @ 3.40 GHz
16 GB RAM
Civil 3D 2012 SP2
I have been adopting a linetype scale system for CENTER & HIDDEN types that works perfect on one drawing but not in another.
Here it is:
Globally,
Measurement:1
MSLTSCALE:1
PSTLSCALE:1
CELTSCALE:1
LTSCALE:1
CENTER lines are scale 0.1 (works fine in all drawings and in both 1:30 and 1:4 viewports)
HIDDEN lines are scale 0.3 (work in one drawing but failed in the second drawing in both 1:30 and 1:4 viewport)
Setting the HIDDEN lines to 10 works with most other drawing.
I want to know first of all why this setting of 0.1 CENTER and 0.3 HIDDEN works on one drawing and not on another one in spite of the general settings set alright.
I'm trying to model a ceiling mounted arm system with the possibility to change arm lengths and angles.
My problem: I have a box with a cylinder attached to it. No problems there. Then I have another box which is the first arm of the system. I want the arm to move when I change the length of the cylinder so that the arm is always connected to the cylinder and the cylinder always connected to the other box.
I'm trying to model the under drain system of a synthetic turf field in Hydraflow.
View 1 Replies View RelatedI am newish to AutoCAD having just gone through a Lynda tutorial.
When i open my layout i see my drawing as a very small drawing at the bottom. When i expand the whole layout i see shapes which re related in that its the basic shape of the drawings but that's it. No lines at all. In the Lynda tutorial all seemed so easy. I am using metric. I have uploaded the file.
I work with a 0.1 text height (in the model tab). I want to have in the layout tab a 1.5 text height always. That is when the scale is 1:200, 1/50, etc.
What do i have to do to achieve that? Maybe annotation scale.
I am trying to draw a floor plan, that has one side 90' long. When I change the units to Architectual>inches, and then enter 90' as my line length, the line becomes way too long to fit on the screen. This is clearly some sort of a scaling issue.
View 9 Replies View RelatedI have an old dwg that was scaled 1:500 in model space. I want to make it 1 to 1 in model space, then change it to a different scale in the layout. So in model space, do I just click on Scale then type in 500 and therefore my object should be 1:1?
View 9 Replies View RelatedCan you print a model file to scale without setting up a view with a scale? Like in Autocad, you could print the model space to a certain scale within the page setup manager. Does revit have anything like that? Or do I have to set up a sheet view prior to printing anything?
running revit architecture 2011.
Q1: can you scale your drawings on Model Space?? if so, what command should i type?
Q2: can you scale different drawings (different scale) on Model space?
I have been using Autocad 2000i LT for a number of years now but with limitations.(self tought of a fag packet) I am trying to get it to work for me rather than me work for it! Normally i use it for doing for producing panel wiring drawings, the way i normally do this is have a drawing on layer 1 then copy paste for additional layers, though this works ok, when i need to change eg date / site ref i have to change it on every page. I know by doing the basics on the model this then transfers to the other layouts. Plots set up for A4 landscape, on model / layer scale set to 1:1 I do drawing on model then when choose new layer the drawing scales down even though set 1:1 paper size same ect.
View 9 Replies View RelatedI am using File>Export Layout to Model... command.
The drawing exported in half scale means a circle with 10mm diameter dimension on it exported as a circle with 5mm diameter But the dimension on the circle remains as 10mm!!!
How does this happen and how can I fix it?
I have a drawing with the model space set at 3/16" scale. I've never worked like this before (I obviously always scale in layout space). However, I need to get this drawing back to normal scale so I can work on it.
How to use the scale factor on this to get model space from 3/16" to 1:1.
AutoCAD to draw various drawings, my issue to set scale.
1. what are the procedures of setting scale in modal space? say if is 1:1 then how to make 1:2 or how to recognize if someone has set a scale say 1:20 in modal space so that you return it to 1:1?....( here i need the procedures)
2. what is different among the following, one using mm, another using cm and the third one using m when drawing in modal space, do these people face different if they decide to use the same scale in layout to print? say if they us 1:50xp, what will happen, in their output.
I imported a model from Sketchup into 3DS Max. When I apply materials to some of the surfaces, the scale of the texture varies from face to face, these are the triangles that make up a polygon. It's as if the texture is getting stretched or compressed in one direction or another. Other polygons allow for consistent materials. It seems to be random and I can't figure out what to do.
View 2 Replies View RelatedSUBJECT: Annotative Scales.
I have a drawing with a 2 viewing ports
Port 1 is at 1/4"= 1'-0"
Port 2 is at 1/2"= 1'-0"
What should my Annotative setting be in model Space?
