I work with a 0.1 text height (in the model tab). I want to have in the layout tab a 1.5 text height always. That is when the scale is 1:200, 1/50, etc.
What do i have to do to achieve that? Maybe annotation scale.
I am newish to AutoCAD having just gone through a Lynda tutorial.
When i open my layout i see my drawing as a very small drawing at the bottom. When i expand the whole layout i see shapes which re related in that its the basic shape of the drawings but that's it. No lines at all. In the Lynda tutorial all seemed so easy. I am using metric. I have uploaded the file.
I am using File>Export Layout to Model... command.
The drawing exported in half scale means a circle with 10mm diameter dimension on it exported as a circle with 5mm diameter But the dimension on the circle remains as 10mm!!!
How does this happen and how can I fix it?
“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
CIvil 3D 2013 / My drawing opens in layout view and all model objects are appropriately coloured by layer. If I hit plot at this point, my colour dependent .ctb file works fine. However, once I swtich to model view, all my linework turns white and if I switch back to Layout view it remains white and plots each line with the weight assigned to the colour white.
View 2 Replies View RelatedI am creating an A3 pdf of a layout at a scale of 1:200. I am creating the pdf from model space, but when I print the pdf off, it is not quite to scale. What am I doing wrong?
View 5 Replies View RelatedI've got a drawing of a site, which is about 144 meter long, so 144000 mm to put it in autocad units. I drew it completely in millimeters, and made a new scale in the layout view 1:500, all my units are set to millimeters.
I would expect when chosing the scale 1:500 it would precisely fit on my paper, as 144000/500=288 and the longest side of an A4 paper is 297.
But somehow, when chosing the scale, things get seriously messed up... My drawing is no longer recognizable at all as it is zoomed in way to far...
Also, when watching youtube video's about lay-out, I always see a little toolbar under the main frame (the one where your title stands) saying things like new viewport and page setup. Somehow it's not visible with me... How can I turn it on?
I don't know how to plot/scale from layout. I have drawing in model that wont show in layout. Drawing is in scale 1:1 in mm. i have to plot it on 36" paper in scale 1:500. I saw someone scaling it with commands something like, z-s-1xp, an ucs.
View 9 Replies View RelatedI have a bunch of drawings saved on an external hard drive. When I go to open most of them the dim come up correct until it regens then they change to a wierd scale factor, I can highlight all of them and change back to scale 1 and save but when i come back into it they do the same thing???
View 3 Replies View Relatedi already know how to change the viewport scaling from 1:1, to 1:10, to 1:20, and so on but my real issue is someone before me change the view scale from 1:1 to 1:.808XXXXX. when i print my figures from the layout everything that is not in the viewport ( like my scale bar) come out shorter that it is on the the screen in paper space. Ive tried to change it back to 1:1 but it wont accept it and keeps the .808XXX value.
View 2 Replies View RelatedWhy in layout in viewport scale in these two file different ??? with same scale 1:60???!!! i cant find answer in file f-metric scale 1:60 while in e metric 1:300 to be same file F-metric ??if you make it 1:60 in file E-metric view will not same ?? what the reason ?
View 2 Replies View Relatedhow to make the drawings on scale on layout. i have
layout.jpg
attached the pics of it also..
Seems this question comes up often so I put this together. If there are any errors or omissions
Options for setting Viewport scale.doc
Is there a proper way to change the settings so the linetypes in model and layout will look the same? Or do I have to change ltscale?
View 7 Replies View RelatedI'm new to AutoCAD and have made a 3D model of a specific mounting bracket.
Now that I have the 3D model, I want to 'translate' it to a 2d layout so I can put some dimensions in it and bring the drawing to a local mechanical engineer. Here's the file of the drawing:
SL135_Mounting_Bracket.dwg
i downloaded the trial version of 2k9, on a win xp machine, with the main interest in trying out this new feature...unfortunately i have yet been successfull in using it as autocad either locks-up durring the export or end up with an "unhandled exeption...eDegenerateGeometry"...
i'm also attaching the details of such an exception (and i probably should report this to autodesk for their investigations)...
Ineed te see the layout in the same time when i am drawing in the model.is there away to do that?And can i make a link from the model guide to certain layout ( to see more details for example)?
Im using autocad 2011.
I have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.
So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!
However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.
I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...
I can't seem to change a viewport in layout view to show my drawing properly. No matter what I do the page only shows a very zoomed in view or a very zoomed out view. I have tried all menu options witht he word scale in, including the scale list. I have looked in the properties inspector.
View 5 Replies View RelatedI have received a drawing that is only showing in the first layout tab on a contractor's template. The drawing is in a viewport of course. The drawing does not show in the model space.
1. Is it possible to send a drawing only in the Layout tab?
2. Is it possible for me to do something to view the drawing in model space and how is it done?
3. Could it simply be a compatibility issue between the contractor's.
May i know why some of the layers appear in model but missing in my layout drawing ? Is it had been frozen ? How can i unfreeze it ?
View 1 Replies View RelatedVB code to do the EXPORTLAYOUT command? I need to create a batch program to do a large number of files from the layout to the model space. The program can either copy the layout to the modelspace and save or copy the layout to a new file. Either way is fine. These are old MDT files that we are moving into the Vault, but Vault doesn't like them and the drafters are using AutoCAD in modelspace to revise them.
View 4 Replies View RelatedAs the layout tabs I'd like to have a multiple model-views tabs.
I can use layouts tabs, I can change the background color to same as model tab and all its ok.
However I'm unable to set scale to have text and annotation with a "human" size (that is, thinking on my screen and not on the paper).
Maybe this is a newbie question but I'm lost....
What is what I must to set ? I dont want to use layout to print, but to view my drawing with custom layer settings.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Civil 3D (2013) how much you have to improve....
i want to create a layout that just surrounds a given model windows, with a given scale. that is, not set to a specific paper size or with title blocks etc. Is there a way?
View 5 Replies View RelatedI am having problems moving my drawing from the layout tab to the model tab.
Copy and paste is not working.
Is there another way to move the drawing?
I have attached the file that I am working with.
Chestofdrawers1.dwg
I clicked "Hide Model and Layout Tabs" to see what it would do, and now I can't get them back. Not only did I lose them in that drawing, I lost the tabs in EVERY drawing and EVERY version of C3D. I googled the problem and every forum says the same things, and I've tried them without success:
Options >> Display >> Layout elements >> Display Layout and Model Tabs
CUI >> Workspace Properties >> Model/Layout Tabs >> On
I'm lacking a couple of icons on the lower tray to the right of the Model/Paper button.
The baffling thing is that I've lost the tabs on ALL versions of C3D. Is there a magical command line entry that will bring back my beloved tabs?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
I have a file dwg with a drawing (drawing of the customer) in space model and space paper I have several layuot (5). How I can save or export that file only contained in model space (customer drawing) and one layout of the 5? For example space + layout model No. 3 ...
View 1 Replies View RelatedI am having trouble trying to change the View Scale in the the layout tab. Someone before me changed it to be 1:0.808 and now when i print my drawings they are all smaller than what is shown on the screen. how do i go about changing this number so its 1:1?
View 9 Replies View RelatedHow to print a viewbase layout with a large scale factor? The problem I'm having with ac2013 is that the print is coming out with jagged edge.
View 9 Replies View RelatedSize of labels in model and layout modes,
I couldn’t figure out how the label size is controlled at the layout mode. Please, have a look on the two attached screenshots that shows the label size in model and layout modes.
I want to export a layout as a dwg file. Why do I want to do this? I got a drawing, and they put some stuff on the layout, so I want to export the layout so I can then work in the new file in the model area? Do you get what I mean?
Also, If I make a layout, I put my Firm Logo and information in the layout. If I send this to another firm, which isnt using Autocad, they than can only see the model area, so If I can export it into 1 file, in the model area, they cann see the whole thing.
