3ds Max :: Merging CAD Data To Different Scale Scene?
Jun 10, 2011
I do have a scene with CAD data in it, some of it is collapsed to poly some of it is left as mesh. Now i want to import this data to a scene with a different scale. When doing so, some parts of the object become very large while others shrink to minimum. Only a few parts stay at the correct position. These follwing steps I tried to correct the problem:
- Linking everything to a Helper = FAIL
- Attaching everything to one Object = NOT AN OPTION
- Collapsing everything to Poly or Mesh = Fail
- Grouping = FAIL
Is there anything else i could try to get this dam file merged? Like a Pivot Point Reset to World? Match Scale Pivot Reset...
View 2 Replies
ADVERTISEMENT
Jan 8, 2014
I would like to compute a scale of scene based on data from dxf. I think, should use some data from VPORT like view height and lens length.
View 1 Replies
View Related
Jan 5, 2006
I've got two identical photos, one in summer time (all green) and one in winter (snow covered).
How would I go about merging these half way across the picture to show a transition from winter to summer? Kind of like two seasons in one photo.
View 9 Replies
View Related
Nov 22, 2011
When I merge an animated camera from another scene, the movement setting keys for the camera and target are there, but it appears that animated exposure settings are not. Is there a way to import those with the camera, as well?
View 9 Replies
View Related
Feb 14, 2012
A while ago I thought I saw in a tutorial the ability to merger materials from another scene without merging the geometry. I have dug around a bit but can't figure out how to do this, or if it's even possible.
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
View 3 Replies
View Related
Oct 29, 2013
I am having a problem with merging a pre-textured object into my current scene. The object initially is successful however when it comes to rendering I get an error stating that the textures cannot be located.
View 3 Replies
View Related
Dec 14, 2011
I have a table setup in Autocad map and am entering attribute data for the objects (Polygons). I have received a new dataset which I imported as points into the drawings which sit inside in the polygons. The points imported include one attribute data field that I want to get into my table.
In practical terms I am entering data re building heights, received a lidar file with point data relating to the building height.
View 9 Replies
View Related
May 16, 2011
I have a modell that is made with the system scale set to mm, and try to merge the modell in to a scene with the system scale set to m. The merged modell appear 100 times bigger than it should.
Is there a little trick for this?
View 3 Replies
View Related
May 26, 2011
VS9 enables users to virtually split clips by scene before adding them to the work space. It does not split the actual file but just keeps pointers to the various scenes. VS9 keeps this data in a file named scenedb.dat. However if the clip is moved to a different location then the scene information is not re-linked and is essentially lost (as far as VS is concerned) although the data is still in the scenedb.dat.
Is there any way to go around this problem and recover the scene info after a clip is moved?
That is, besides not moving the clips to a different folder than the one it was in when the scene data was first generated and/or re-generating the scen information?
I tried simple editing of the file path in the .dat file but this does not seem to work. It would be nice to understand the encoding rule for the scenedb.dat file to 1) update it 2) use it to generate some index db outside of VS (e.g. html page).
View 2 Replies
View Related
Sep 26, 2012
Data Connect Image Printing problem.I have an Aerial image that I bought in via Data Connect. It's been working well for a while. Suddenly the next time I go to Print, either to the plotter, DWF or PDF, for some reason the entire Image is thrown to the northwest corner of the viewport at a miniscule scale! The image is fine on-screen, until you print or even do a print preview!
I tried disconnecting and reconnecting, did an audit before I reconnected, deleted all my Cache files, but to no avail! This is not the first time this has happened, but the last time it did, disconnecting, doing an audit, and deleting the Cache files before reconnected appeared to solve the problem. But this time (just when we upgraded to Map 3D 2012), it didn't work.
View 1 Replies
View Related
Oct 31, 2011
I have been through all of the system variable field sources but cannot find one that stores the scale of a viewport. I want to add a field to my drawings that prints the viewport scale and updates it automatically if and when I change the scale.
View 3 Replies
View Related
Apr 13, 2012
I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
View 9 Replies
View Related
Sep 2, 2012
I have a floor plan with a very long footprint in a "View" drawn at a convenient scale.
The long building had to be broken to be put on several different "Sheets", and each of the floor plans on each of the sheet has a scale.
When I change the scale of the partial plan on one "Sheet", all the other sheets also change to the same scale and also the original view changes to the new scale.
Is there a way to assign the desired scale of the plan on one sheet without affecting the scale on the other sheets and on the original drawing view?
View 4 Replies
View Related
Jun 26, 2009
am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
View 9 Replies
View Related
Jun 27, 2012
We have recently noticed that after printing a PDF of a drawing I plotted from AutoCAD we are coming up with differences when we double check the scale on the printed hardcopy using a carpenter ruler.
For example, there is a dimension labeled on the drawing of 200 ft. However, if I try to scale this out with a carpenter's ruler at the drawing was set to (say for instance it is 1 inch = 100 ft) I am coming up short of the 2 inches it should be (typically come up around an 1-15/16" or around 194 feet, approx 97% of the correct amount).
In the Page Setup Manager in AutoCAD, I have the following options selected (see the print screen as well):
Printer/plotter selected: DWG to PDF.pc3
Paper Size: ANSI full bleed B (11.00 x 17.00 Inches)
What to Plot: Layout
I don't have a plot scale scale other than the default 1" = 1'
No plot style selected
Then, on the print menu when I open the PDF that I have exported from AutoCAD, I have the following settings (see the print screens I have attached):
Printer: The printer I use (Konica Minolta c650 Series PCL)
And I have selected the Options "Auto Rotate and Center" and "Choose paper source by PDF page size**"
** Note, that I have tried unselecting the "Choose paper source by PDF page size" option and accordingly changed the paper size in the "Page Setup..." button at the btoom to match the document size (i.e. 11.0 x 17.0in) and it gets the difference to be closer (i.e. I now get 198 ft but some of my border gets cut off). See the print screen below for this a print screen of the print menu and sub-menu of Page Setup showing the paper size selected.
I saw that some people in other forums state that there is no real solution when trying to scale off of PDF's and that there should be a disclaimer saying as much if you are to send the file out to a customer who may rely on doing some in the field scaling from the printed copy of the PDF file. I find it hard to believe there is no solution as we have received some drawings from others whom the scaling works just fine.
View 3 Replies
View Related
Jun 27, 2013
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
View 4 Replies
View Related
Aug 9, 2012
I am working on automating page setups in model space and am looking for a way to set the plot scale equal to the annotation scale for scaled drawings with
(setvar "filedia" 0)
(setq a (getstring (getvar "cannoscale")))
(command "-plot" "YES" "MODEL" "" "" "" "" "" "" !A "" "" "" "" "" "" "_Y" "_N")
Setting the plot scale with !A causes the lisp to fail. However, when running each prompt through the command line individually, !A works fine. what is missing?
View 2 Replies
View Related
Jan 5, 2012
When I'm editing pix, and need a quick large solid brush for a couple seconds, (1-inch dia), I slide "scale", but it's nearly impossible to manually rest scale back to default without restarting Gimp...
Can there be a dot-button beside scale that auto-sets scale back to default..? and/or a timer on scale changes that resets scale back to default after ten-seconds..?
View 2 Replies
View Related
Nov 22, 2013
I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
View 3 Replies
View Related
Mar 29, 2011
I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
View 2 Replies
View Related
Apr 19, 2013
I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
View 1 Replies
View Related
Nov 8, 2013
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
View 3 Replies
View Related
Apr 15, 2013
I have a 3D part, which I want to scale down to 0.5 the size in X and Y direcions, but I don't want to scale it down in Z direction.
Is this even possible? How do I go about doing it?
View 9 Replies
View Related
Sep 6, 2013
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies
View Related
Mar 15, 2011
I work in autocad 2010 and I draw in scale 1:1 . What an annotation scale is, moreover I have never used annotative objects in my drawings.
Nonetheless, when I try to plot a drawing, while I am in the model view, I choose the scale in mm/units, I select the plot area and when I press preview or plot, I get the message THE ANNOTATION SCALE IS NOT EQUAL TO THE PLOT SCALE. DO YOU WANT TO CONTINUE?
I press yes, I print it and the outcome is always a bit smaller than it should be.
When i am in the layout mode and I try to plot, I dont get this message. But I dont know how scaling works in this case. For example I want to plot in a A4 paper, scale 1:100. So I type 1000mm/100units, as I did in the model mode, but the result is wrong.
View 3 Replies
View Related
Apr 10, 2013
I would like to find a lisp that changes the scale of something that has an annotative scale and deletes all other scales in the object scale list. Often i have many different scales of existing dimensions or objects. i waste a lot of time opening the annotation object scale dialogue box, selecting add, finding my scale and deleting the old scale.
View 3 Replies
View Related
Apr 10, 2013
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
View 4 Replies
View Related
Jun 1, 2013
I am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file.
View 1 Replies
View Related
Apr 24, 2012
I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
View 3 Replies
View Related
Feb 7, 2013
My scale list has metric list on it as it suppose to have both metric and imperial scale.
Screen shot..
View 2 Replies
View Related
Sep 16, 2005
is it possible to create a gradient brush with the colors fading from black to white, and then edit the colors so instead of black fading into white, it's now black fading into transparent?
(so the pixels that were pure yellow are now completely transparent, the pixels that were slightly darker yellow are now almost completely transparent, the pixels that were dark yellow are now barely transparent, and the black pixels remain completely black.)
(I was only able to do it now because I started off with that black/transparent image)
I want to do this so I can change the color of the yellow.. I could use replace color,
What I'm basically trying to do is be able to change stuff in images/screenshots, like add a pattern to a white shirt (so, get rid of all of the white), but completely preserve the darkness of its wrinkles/shadows etc. A friend told me I should just desaturate it, then make it like 50% transparent, then duplicate it so there's 2 of those layers.. and add the new pattern behind it. But it doesn't look that good..
View 9 Replies
View Related
