why i have billions little light spots all over my picture ( render ) ? I also notice when put only one material ( vraymat) i dont have little light spots.
I used vray.vraylight ( sun ). vrayphysical camera.
I am using the CS6 trial in order to decide if I want to switch over from CS4. When I try to use liquify, I get a teal screen with a few light spots that are vaguely in the shape of the image. If I select a tool it does not show up over the image, only around the edges. I've heard that CS6 liquify requires significantly better graphics than previous versions. Is my computer simply incapable of handling the new version? I realize that my computer is not ideal for image editing, and I try as much as I can to work in the maclab at school, but both of these computers were able to handle CS4.
Computer1: AMD athlon II x4640 processor 3.0ghz, 8gb ram, ATI Radeon HD4200
Computer 2: intelcore i7-2620m processor, 6gb ram, intel hd graphics 3000
When using the adjustments brush to locally increase exposure(for example) it seems that not all pixels are covered. In the red display of the selected zone you can see black spots all over the zone that are not selected even after repeated use of the adjustment brush. The result looks like heavy noise and is pretty bad. I must say it gives the impression that it happens with "low light" pictures only!? Windows/XP3, Lightroom2.2
View 6 Replies View RelatedI took some pictures outside recently and when I looked at them later realized there were sun spots on them. I have Coral Paint Shop Pro x2 and how to remove this sun spots so I can salvage the pictures. Some of the spots are yellowish color and some are white. They are all on peoples legs so I have not been able to find a way to remove them. I have tried the cloning but it looks funny. I have also tried creating a new layer and removing the color yellow from the picture but that doesnt seem to work either.
View 2 Replies View RelatedI'm a total newbie to Gimp. I want to remove a couple spots on a jpg picture of mine. I've read and watched videos that say to open the picture, click on the healing tool, then press ctrl and click at the same time and pick a good area on the picture. Then after that, you can click on the spots to remove them. I try to do all this and it won't work. I get a plus sign and/or a circle with a line through it.
What does that mean? How on earth would I know how to fix this? I got it once yesterday but I don't know what I did. It seem to change when I changed the size of the brush but it was probably something else that changed it. It's probably something so simple.
I have a ~8.1MP image that I want to get printed on a pretty large scale. However, there are a few spots on the image that I am going to need to remove.
(Picture file here.)
There are 4 large black spots (circled) that I am sure should not be there. I am pretty sure they were smudges on the camera lens, because I have the entire set of images that was shot in this same jump, and those 4 spots are in the same place in all of them.
However, there are also a lot of white-ish spots scattered about the upper half of the image that seem to be mainly near the ends of the "sun-star effect" (which is one of the coolest parts of this picture, IMO). They don't seem to be present in the other pictures from the set, but perhaps they are also lens smudges and only show up in this one because there is such bright light hitting the lens, making them noticeable.
Are the white spots part of the attractive sun-star and should stay?
Are they smudges on the lens and should go?
Are they part of the sun-star but should go regardless because they don't look good?
Does the sun-star even look good or am I crazy?
Bonus question #1 - Are the red, yellow, and blue "hexagons" (noob terminology here) attractive? I kind of like them, but what do photo pros think of these things? Lens flares, they're called, right?
Bonus question #2 - Should I make the image brighter, so more color in the jumpers and their suits can be seen? Or should it remain this dark, since it is in fact a silhouette?
Before I spend the $25 to make a poster-sized print for my wall, I want to make sure I get the image looking good. The 4 black spots, I think I could probably remove without too much hassle (limited Photoshop skills here). But the white spots would be harder I think... for one thing there are many of them, and for another they occupy the same space as the sun-star, which I don't want to screw up.
I looked at the picture but I saw the right of the picture is darker than left . Which tool do I use to darken it or lighten?
View 6 Replies View Relatedi have Photoshop CS3.
i started my own business selling xbox controllers on ebay and i would like to make a picture that is of a xbox controller but a blinking light in the middle, and i want to make 3 pictures with different speeds.
i got the idea from another persons ebay page and i tried to copy the picture so i can put it on this forums but the page wont let me right click so im going give the item number and just look at the picture to see what im talking about Item number: 330286213529 go to ebay and type that item number in and look at the page
but i dont want that exact button blinking i want this button blinking red in the middle of the xbox controller.
I can clear a picture as missing light?
View 7 Replies View RelatedI am trying to make invitations and I want to put a picture thats very light and faded in the background. then on top of that i will write in invite info.
View 6 Replies View RelatedI'm sure i can locate a tutorial for clouds, Just i am recreating this cloud BG effect but i cant find that really nice bright light effect over the clouds and the really bright shine around the human layer.
View 3 Replies View RelatedI am trying to animate a casino-like light board made of tens of light bulbs/leds. I thought the easiest way to do it would be creating a matrix of bulbs arranged by material ID and then design a pattern in multi sub-object materiel so I could somehow scrub through it and achieve animation effect. The material modifier allows to change ID for the whole object only and MaterialByElement shuffle ID`s in a random manner.
[URL]
I am attempting to build a facsimilie enigma machine, I would like to know how best to create an effect so that when a key is pressed a corresponding letter appears to light up. Btw I am not looking for an animated image, I can take care of the transitions between on and off, I just need to create the two image states.
Attached Thumbnails
How do you lock the pivot point of a light to the light itself? I thought just adding a Axis node would move the light and pivot point but the pivot does not move. Is there a way of parenting them together?
View 2 Replies View RelatedHow do I use the standard Revit can lights in a wood joist floor with drywall applied to the bottom? If I place in a suspended ceiling, can lights light up just fine. However, if I use them in the floor space of a wood joist floor, the light itself gets covered with the floor. How can I get the light to cut the floor out so I can see the light when it is rendered?
View 4 Replies View Relatedtrying to get CS4 Design Premium to install. I finally managed, with the considerable help of a tier three Support Engineer. Since then I've had about a week's exposure to Photoshop CS4. Here's a list of things I don't like and/or those that don't work:
1) Program always crashes when I try to save a GIF file or try to use any of the new 3D tools.
2) I like two-across tool palette. When I drag workspace to left, it covers up this palette.
3) I like to leave three palettes open on the right, History, Characters and Layers. For no earthly reason that I can fathom the Layers palette has gotten considerably wider, and it cannot be reduced horizontally. Oh yes, I could reduce these three to icons, but then I'd be constantly clicking to open them and clicking to close them.
4) Open palettes have foreground precedence. This means that when I try to enlarge my workspace to the right, the workspace scroll bar disappears underneath the palettes.
5) The essentials button is destructive. I found this out the hard way when I clicked it and it wiped out a newly customized workspace. Now I know to save my customized workspace immediately upon completion.
6) Why did Adobe add the Adjustments button. It just creates an extra step when making adjustments. CS3 was smart enough to pop up the correct controls when adjustments were being made. Example: create New Adjustment Layer > Threshold. On my copy of CS4, I have to click Adjustments before the control shows up.
7) The new toolbar (at top of screen) wastes considerable space and is not deselectable. Hint courtesy of Support: Save your custom workspace with a very short name 2-3 characters; then this toolbar will combine with the menu bar.
8) Scrolling through highly magnified images is abysmally slow - much slower than it was on CS3.
9) The clone brush is less accurate in CS4, and it doesn't always turn off when one is finished cloning.
10) None of my CS4 files installed with responsive, indexed Help files. Now, every Help request sends me to a sluggish web site where there are no indices, poorly organized information, and in some cases just a message that Help area is under development.
11) I haven't been able to get the Patch tool to work correctly.
12) When program crashes (not always while attempting to save GIFs or 3D), it does so with generic, uninformative error message. In one week, I have had more Photoshop CS4 crashes than I ever experienced during the lifetime of CS3.
13) Why did the installer leave 34 superfluous language items (ones in anything other than US English in my case) in both the Legal and Lmresources folders? The product is bloated enough without oversights like that.
How many more will I find during the next week? I don't know, but I'm sure there are more to be found. How many of those that I did notice are due to the dreadful suite installer? I don't know the answer to that one either, but I suspect the installer may well have played a role.
I'm sure many will disagree, but IMHO Photoshop CS4's user interface is godawful compared to its predecessors. I can't find a single thing that can be accomplished with less mouse activity or keystrokes than earlier versions, but I have found quite a few things that demand more.
I was fortunate enough to have my installation issues addressed by one of Adobe's top support engineers. Had it not been for that, I'm reasonably certain I'd still be trying to install CS4. I've been using Photoshop since version 3, and the Creative Suites going back to the first one. This is the first time I've ever felt that quality assurance was completely ignored for the sake of meeting a self-imposed release schedule.
As I remarked in one of my earlier email exchanges with Adobe support, "I wish that every software Product Manager would study the reasons why Vista and Office 2007 have gotten such lukewarm receptions." I'm afraid the CS4 team didn't learn from Microsoft's mistakes.
Running LR5 on Win7, I can't see "Visualize Spots." I select the Spot Removal tool, but the Visualize Spots option does not appear below the preview. I can turn it on with the "A" keyboard shortcut, and the display does change to show the tool in action, but I still don't see the tool displayed below the preview (therefore, I can't adjust the strength). I do have the "Tool Overlay" option selected to show, and I don't see any other view setting or preference option that appears to affect it.
View 2 Replies View RelatedI've got a hatching problem...whenever I try to use a "dot" hatching...at a scale of 50.000....I tend to get this wierd white spots on different areas...and it seems to flush with the MLeaders...(See Attached Image).
View 4 Replies View RelatedSpot syncing with "no" spots is not working in Lr5.3 (did not work in 5.2 either)
If I reset the spotting on a source photo and sync the "NON" spotting to a target photo that has spotting, the spotting is not cleared as it should be on the target photo.
If I reset the spotting on a source photo and put ONE new spot in the source photo and sync this ONE spot to a target photo that has spotting, all the spotting is removed from the target photo and the ONE spot is the only one in the target photo as expected.
Shouldn't the sync of spotting always work the same, with or without spotting in the source photo?
I think this should be considered a bug or at least a design flaw. OSX 10.8.5 LR5.3
Since today i've gotten some problems with CS6..When i import an NEF file into photoshop some photo's suddenly get some black area's.On bridge or Gimp the photo's are how they should be... but in photoshop i'm getting this:
If i change the channel mode from 8bit to 32bit it looks just fine... but i cant edit anything..It will probably be an setting i've missed or something.. but i'm really stuck, i cant finish my pictures in photoshop!
Video drivers are up to date.
Mode =rgb color - 8bit
What would be the best way to get rid of the white spots on the attached photo?
View 2 Replies View RelatedI need to turn a B&W photo into screen print art without using a line screen (just block colours) - essentially I'm creating a 3 colour black and white images using:
- PANTONE 4625 C
- PANTONE Warm Gray 6 C
- PANTONE Warm Gray 1 C
Using a bunch of techniques (unsharp mask, tritone and posterize) I have line art that looks great with a posterize level of 4. But I've noticed that Photoshop is using my Tritone colours to mix itself an extra tone - and if I switch to a level of 3, Photoshop chooses to remove the level that PANTONE Warm Gray 1 C uses which deletes all the highlight detail.
Is there a way I can specify colours that Posterize uses?Or is there a different approch I can use to split the tones into the ones in the Tritone?
I've tried playing with the curves in the Tritone window to try and influence the colours photoshop uses (so no colour mixing) but maybe I need to somehow save the Tritone layers into the channels pallate?
I`m using photoshop 6 and recently i installed nik collection software, but now i have a problem. When i open a picture with the plug-in there are a lot of blue spots on it... i was told that the problem is not in the plug in .... i tried different versions of that plug in and nothing worked.
View 1 Replies View RelatedI have thousands scans of text (greyscale TIFFs on white background) that need cleaning up. Each scan has tiny black spots throughout the page, which cause unacceptably "dirty" prints. The only method I know is to select areas between text manually and hit the delete key - which takes about 30 mins per page! There must be a way to select an entire page and remove black spots of a certain size in one hit.
View 8 Replies View RelatedI had a picture of a 10 year old, I want to use photoshop to make the 10 year old in the photo look 60... i want to add wrinkles, age spots, yellow the teeth, thin the lips... etc...
View 2 Replies View RelatedI just got a freelance job cleaning/sharpening and generally making beautimous, about 100 deep sea photos...all was going according to plan, when I came upon a large group that, as soon as I brought the levels up, along came these horrific sprays of water spotting, that I have no idea how to deal with. I don't think there's a way to make it look real if I use a tool like the clone or bandaid, and I tried working in LAB mode, to see if there was any way I could make a difference with the gaussian blur, but that did nothing, and that may just have been hopefull. I can't remove the guys background, and I know there are some extra softwear programs that work with spotting etc. but in this case I can't see how they would work and still keep the picture sharp..?
View 6 Replies View RelatedI guess one way to do it would be to capture the color of my facial skin, then paintbrush the area over with that color. But how do i do that? or do you have a better method?
View 1 Replies View RelatedI'm new to Gimp - I've had it installed on my computer for a while now but haven't tried to use it because it's got so many features it was just - well, intimidating. But now I've started a big scanning project involving a lot of old family photos, and as you can imagine they're not all in good shape. So I have some repairs to do.
The first one I scanned turned out pretty nice, but the second one is challenging me. It dates from about the 1920s and looks kind of sepia-toned but I had to scan it in gray shades because of a kind of moire pattern at the bottom (it's mounted on a piece of thick cardboard which is bowed and I had trouble getting it to lay flat on the scanner bed, so maybe that's why). The black-and-white image that resulted actually looks better than the sepia, but there are a lot of water spots in the upper left corner. Some of them are really large and in many different shades of gray, which is making it almost impossible for me to fix them using the cloning tool. I thought about just copying and pasting from a better section, but all those different gray shades mean that didn't work very well either. I can crop some of them out, but not all, and besides, the cropping changes the composition of the photo, and not in a good way.
Obviously I don't have great skills with this software (although I'm thinking that might be different by the time I get this project finished ). FYI, the version I have is 2.6.11, which is probably old; I could update if necessary. And it's running in Windows XP SP3.
See the image.
remove dust spots out of a shot? Is there any easy way to do it?
View 5 Replies View RelatedI have installed lightroom 5.3 on my desktop at home (upgrading from 5.2 and previous versions all the way back to V1). I do not get the menu showing visualize spots which is VERY frustrating since it will be a very useful tool. I ahve also installed 5.2 on my laptop and here I do get the tool.
View 1 Replies View RelatedWhat could be the reason that the dialog "visualize spots", which usually appears under the images after clicking the healing brush option, does not show up in LR5?? I have re-installed LR5 on my iMac but that did not work. After installing LR5 on my MacBook Air the dialog was there! How can this be? Are there any special settings which I have not considered yet?I know the shortcut is "A" and this one works, but then I have no slider.
View 1 Replies View Related