3ds Max :: Continue Saving To Older Formats
Feb 4, 2014
I really love the new feature in Autodesk 3dsMax 2013 and 2014 which allows you to save your MAX file to an older format, this has been a great addition and useful a lot with the work and staff we associate with who all have different versions of 3dsMax.
Question... is there a setting in 3dsMax which you can enable/disable which once you save to an older version 3dsMax will continue to save to this version. Example... we're using 3dsMax 2014 and our clients are using 3dsMax 2012 so we will: File > Save As > Save as 3dsMax 2012 format. However during the modelling process staff will click the Save button in the toolbar or Hotkey "CTRL + S" to quicksave and this will default back to 3dsMax 2014 format. 3dsMax files then get delivered to the client and they can't open it.
The information is provided in the Properties so it 3dsMax does know what format the user has specified to save the file in.
View 2 Replies
ADVERTISEMENT
Sep 30, 2013
in my autocad 2014 save as in 2007 & 2004 format system is not responding and not able to finish. but when i save in 2013 and 2010 format is ok. i install same copy of autocad in my laptop its working good.
my system config: operating system - w7 64bit
8gb ram and 1tb hard disk
View 8 Replies
View Related
Jun 23, 2007
I have a Photoshop file (PSD) with 2 layers: a white background and one layer with text.
When I click "save" to save my PSD in another format, the list for available file formats become limited. There is no option for JPG, GIF, TIF, PNG, etc...
View 5 Replies
View Related
Apr 2, 2013
I had autocad 2013 but it was infected with a virus so i was obliged to install 2012 version. problem is that all my files are saved as 2013 and would not open in 2012. How to save all files at once to older version?
View 8 Replies
View Related
Jun 27, 2013
I am currently using autocad 2002. An engineering firm has sent me a dwg file that was created using a much newer version of autocad. I asked them to save it back to version 2000, so I can open it. Well, I can open the file, but I'm getting this command "ARXERROR: eNotThatKindOfClass.. whenever I do a basic command??
Now I have gotten dwg files from other firms, and they have worked flawlessly. Would it be how this particular firm has saved the file?
I have tried to open a new drawing, and xref this drawing into it, but all the linework does not show up?
View 9 Replies
View Related
Oct 3, 2012
Saving files in graphics formats?
View 4 Replies
View Related
Sep 29, 2012
With Photoshop CS6 Extended when i go to save image as jpeg it shows as file name.iff, if save as png it shows file name.pxe and save file as pdf it shows file name.pcx. All formats seem to show another format.I have done all the updates. On a mac as well.
View 3 Replies
View Related
May 6, 2013
have two questions:
1: I currently am using AutoCAD 2011 is there any option to back save drawings to 2008? I do not seem to have this choice.Only 2010 or 2007 or 2004.
2: If I upgrade to 2014 or 2013 will I have the option to back save to 2008?
View 5 Replies
View Related
Mar 29, 2013
Is is possible to save in multiple formats concurrently (CS4 & CS6)? Our images editors are having to "save as" .png and then again as .psd in order to complete their work. Clearly the overhead stacks up over time.
View 1 Replies
View Related
Jul 21, 2011
How do I save a file in X5 so it can be opened in X3?
View 9 Replies
View Related
Oct 1, 2012
I use a machine called a shopbot to cut wood projects. Students draw the parts in Inventor, place them into a idw and use the save copy feature to save it as a DXF file. The shopbot uses a progam called partworks v2 and it reads DXF files. This worked great for the past few years until this summer when we installed the 2013 inventor on our computers. I contacted Shopbot and they said other people are having the same problem and the solution for most of them was to save the idw file as an older version. Last year we had AutoDesk 2011 and it worked fine. how I can save a 2013 idw as a 2011 idw?
View 5 Replies
View Related
Oct 21, 2013
I have a situation where a teacher in our PLTW(Project Leads The Way) who uses inventor products for sometime is not able to save a old current project or make changes to this project, then save it. What is happening is it gives a blue screen error and corrupts the file so it cannot be fixed or opened. We cannot duplicate the process with the teacher, but we can if the file is opened on another computer and it is opened also on another computer at the same time as other pc. However, the teacher states that he doesn't have it open on any other PCs in the school.
View 2 Replies
View Related
Sep 9, 2008
I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP.
View 13 Replies
View Related
Apr 18, 2008
I have just installed Adobe Photoshop CS2 on my Windows Vista Home Laptop.
When I try to run it, I get a message in a window titled "Adobe Activation" saying: "You are not allowed to continue because your account does not have the proper privileges. Please log in using an account with administrator privileges and try again."
I am logged in as an administrator and have installed all my applications using the same login. Though the version I have installed is not yet registered, I am unable to even get to the registation screen as once you click OK on the dialogue, Adobe Photoshop closes.
how I can get round this without opening up any security loop holes?
View 17 Replies
View Related
Jan 19, 2008
I purchased a new copy of PS CS2 and after install, I activate it and it says information was sent. Then a few seconds later I receive an error message:
"An error has been detected and activation cannot continue. Please restart your computer and reinstall application."
I have reinstalled at least six time, even once via SAFE MODE. I have installed via two different CD rom drives, I have followed all the suggested fixes and nothing seems to work.
I then installed on my laptop, and I receive the same error message.
I can, on both computers, open ImageReady CS2 and use it; it seems to be affecting only PS CS2.
Compaq desktop:
Processor is a P4 3.4 Ghz
ATI X600 Video board
3gb RAM
Windows XP SP2
Viewsonic Digital Monitor
HP Laptop:
AMD 2.0 Ghz processor
ATI express 200 grapics board
2gb RAM
View 37 Replies
View Related
Jan 19, 2013
I've saved a file with paths as .xcf and I can call up the paths again in the paths dockable dialogue. But I can't actually see the anchors or edit the paths. How can I continue working on a path I was working on before?
View 2 Replies
View Related
May 30, 2011
The Material editor by Nitrous, continue to tile the bitmap even if TILE is unchecked.
View 6 Replies
View Related
Jun 20, 2012
One of the users in my office is getting the "AutoCAD cannot continue" error in AutoCAD Architecture 2012. I've read a few of the discussions concerning this issue in earlier versions.
View 2 Replies
View Related
Feb 21, 2013
I am removing the background on a detailed object(s). I removed the initial part..the ants started marching. Then I pushed "control click", and started on another section..the ants started marching on that piece. Then I moved to my 3rd section doing the same. But when you click your final at your beginning on your 3rd section, the ants start marching there also..but you lose the sections you did previously. So I went to "undo", clicked that, and got my previous sections "back".
But my question is..how can I continue taking out the background in this picture...there are a lot of openings between arms and bodies etc., where I need to remove the background. I've tried removing the background on a detailed image one time before, and the same thing happened. Gimp will only allow you to remove so much, and if you try to remove more, it cancels out what you previously tried to remove...how can I continue removing the background on his image, being the image already has an alpha channel over it. If you try to continue after saving the present image to path/invert...you will lose the image your trying to save in the second process.
View 2 Replies
View Related
Apr 5, 2013
I need to write a script that export artboards as PSD then open these files in Photoshop in order to continue the processing.
So here´s basically the concept:
#target illustrator
...body of the code to be executed in Illustrator, concluding with the document.exportFile (...) method; //it´s perfect up here. It generates the PSD properly.
if (app.activeDocument.artboards.length == 1){ //if the Ai File had only one artboard then I know only 1 PSD file was exported. So I need to open this document and continue in Photoshop
...execute this first code in Photoshop.
};
else
if (app.activeDocument.artboards.length > 1){
...execute this second code inn Photoshop
};
The problem is. How it could change the target application in the middle of the script? (this case, inside an IF loop)?
I tried to read about BridgeTalk but perhaps I did not understand it right. Should I send the code portion as a "message" to Photoshop?
View 18 Replies
View Related
Mar 14, 2014
I have an ID-book made out of 10 InDesign documents. Everything is fine, but one thing.
One of the chapters (#4) is made out of two ID documents: "chapter4a.indd“ and "chapter4b.indd". The chapter number, which is automatically given by the book, is correct: 4. But the numbering of the next below level (4.x) is wrong. In the file „chapter4a.indd“ I have the sub-chapters 4.1, 4.2 and 4.3. But in the „chapter4b.indd“ it starts yet again with 4.1 instead of 4.4.
Where is the mistake?
Merging the two ID files "chapter4a.indd“ and "chapter4b.indd" into one is not an option, unfortunately.
Is it possible to let the sublevel chapter number (4.x) continue after the ID-document change or does it start always at ".1" once again because it's in a new document?
View 3 Replies
View Related
May 28, 2013
I am attempting to install Photoshop CS3 on a new computer. I keep getting the message that the installation cannot continue until Internet Explorer is closed. I have tried disconnecting the internet, WiFi, Bluetooth. I still get the same message.
View 12 Replies
View Related
Jul 14, 2012
I cannot open my cs2 all of a sudden. I get an error message "error has been detected and activation cannot continue".
View 2 Replies
View Related
Feb 6, 2013
Say I've drawn a few curves on a layer with the bézier tool, and I want to go back to some that I did earlier and add to them. I'm trying to do this and it won't let me; it wants to start a new line.
View 3 Replies
View Related
Apr 20, 2012
Continue to receive error message when trying to print. What is the problem? I have updated the latest Service Pack.
View 12 Replies
View Related
Oct 2, 2013
I used to have a third party plugin that had a "clone" command.
It was like "Add Selcted" & keep matching the properies for more new objects. So new objects would match the layer, linetype, etc.of what was previosly selected Not just the once.
Is there a command like this in ACA 2012 ?
View 9 Replies
View Related
Jan 15, 2014
I have and element and what I'm trying to do when I click on this element, it starts to play reverse the timeline for 1 sec and after that it continues to playing the timeline from an other point.
View 3 Replies
View Related
Jun 24, 2013
I develop AutoCAD using .NET, I use the Edit and Continue feature in Visual Studio 2008 while debugging and testing what I wrote. I recently got a new machine and now my Edit and Continue doesn't seem to work anymore.
View 9 Replies
View Related
May 15, 2012
Is there an option in Revit to automatically ignore unresolved references and continue opening the file without showing the dialog box?
View 4 Replies
View Related
Feb 4, 2013
I have a corridor design and the corridor daylights very close to the pavement. I need to have rock from the EOP out beyond the daylight point to a 30' offset from the alignment. I need it to follow the EG and show a depth of 2' throughout.
I had to draw the rock shapes manually. But I'd like to figure out how to do it using the corridor if possible.
Please see the attached image. Everything beyond the daylight point was traced on top of the EG and then offset 2' to get the bottom.
View 9 Replies
View Related
Dec 10, 2012
I made a toolbar button with the macros @, and tried also @ pause.
I need this in order to shorten the procedure for relative coordinate input, but, after pressing the button the last point is entered and i cannot continue entering values like in the manual input at the command like, like: @5,5
Even if i use the "@ pause " sequence it doesn't work.
How to wait for user input?
View 9 Replies
View Related
