Xara :: Set The Text Column Width Accurately?
Sep 2, 2011How does one set the text column width accurately?
Snap to grid does not work and there is no coordinates available for setting or am I missing something again.
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Adjust Column Width To Length Of Text
Apr 27, 2012Several times, we generate a drawing, and the text widths in the columns vary greatly. Some have text that is ten characters long, and others have thirty-plus characters.
Is there a way to be able to select the table (or perform the command to all tables in the current layout) and have each of the columns expand to the appropriate width, that depends on the longest string of text in that column, for each column. The problem I see, is that some tables have two columns, some have six, and of course other with any number in between. The same is also true for the amount of rows.
AutoCAD Civil 3D :: Mtext Column Width
May 3, 2012Any way to make Acad C3D hold the value for MTEXTCOLUMN = 0? I am having issues with it resetting my column width to 0, even after I have formatted all the Mtext to read how I want it shown. Once I close a drawing and open it again, the formatting changes that I have previously set return to "dynamic" and column width = 0. I just want to turn off the dynamic setting so it stops messing up the formatting, but I can't get it to retain the dynamic setting. Currently running C3D 2012.
View 4 Replies View Related3ds Max :: How To Increase Width On Command Panel Per Column
Nov 21, 2013how to increase width on command panel by column?
here you can see an image of what im talking about:
[URL]
and here is a example from a video where shows that it is possible to do it:
[URL]
AutoCAD 2010 :: MText Column Width And Properties Revert
Jun 3, 2013I am using AutoCAD 2011. I have been reading of similar problems with MText: I format the text in the drawing to my desired appearance and once I close and reopen the drawing, the column widths have compressed and muddled the text legibility. After reading other similar posts, I set MTEXTCOLUMN to 0 and changed all MText to "No Columns." MTEXTCOLUMN is still set to 0, but the other properties have reverted back to dynamic columns, so I am still having this problem. To check against this being a problem on my specific workstation, a coworker opened the file on his workstation and experienced the same text compression.
View 9 Replies View RelatedAutoCAD Inventor :: Lock Part List Column Width?
Aug 15, 2012I am trying setup a default part list for my company in Inventor, where I am stuck at is I wish to lock the width of the columns so on all our drawings the part list is the same width, I have assigned each column its own width and when I bring it in to the drawing it's the correct size but I am able to drag the edges, and change its size, I want to lock it so if you try you cant
am I missing something obvious in the menus? Or is this a limitation with inventor.
I am using the latest version of Inventor 2013
AutoCAD Inventor :: Part List Column Width ILogic
Jun 11, 2013I found the following code on Curtis Waguespack site. [URL] ........
View 3 Replies View RelatedAutoCAD Inventor :: Edit Field Properties Default Width Of Value Column
Aug 9, 2012When editing the properties for the title block on each sheet of my drawing, I've become rather annoyed with the default column width of the Value column. It always opens to the same width no matter how many times I change it. Every time I edit something in the title block, I have to resize this column to see everything I'm editing.
Any way to change the default width it opens at?
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCAD Inventor :: Rev Table Column Width Not Updating From Style Library
Sep 29, 2011I use a style library. Have it in a read-only mode in the ipj file. My drawing created a new template with a rev table with required columns.
Now, I create a new drawing file and choose this template. add few views, insert a rev table. The rev table columns headings are the same as in the template. But the column widths aren't same as in the template.
I use manage->update. It warns me that the drawing would be matched as per the style library. I agree & OK.
No use, the columns are not same size? Though the style is read only from the drawing, I go to open the style editor to check the column widths. They are different from the template.
AutoCAD Architecture :: Mtext Column Width - Placement Changing After Saving / Closing File
May 2, 2011I've been having this issue happen repeatedly, but not consistently. In a new file, I adjust the width of an mtext box so that the text wraps into multiple lines. When I next open the file, all mtext boxes are back at a wider width so that the text is all on one line. The start of the text is also usually in a different location. This was happening on 2011/XP and now on 2012/Windows7.
View 5 Replies View RelatedXara :: Line Width Become Transparent Not Solid
Aug 8, 2011I'm working on a project, and all of a sudden when I ad a outline line width to an object the outline seems transparent to me. I can get it to stop doing this with copying other objects in the scene that have a solid line around them, but as soon as I go back to the other items the transparent line width starts happening again.
View 2 Replies View RelatedXara :: No Option For Changing Line Width To 6 Px
Jan 9, 2012I'm doing Gary's Create a Sunflower and pot (July 2008) tutorial and just as always I run into problems combining/converting shapes. I believe I have followed the tut exactly and the only thing my lines do is taper at the bottom.
Also, I'm using Designer 7 and there is no option for changing line width to 6 px, only 4 and 8. So I'm using 8 pxls. I tried typing in a 6 and hitting enter but it doesn't accept a 6.
Xara :: How To Control Page Width And Height
Oct 2, 2011Where is the option to control page width & height so that you can make both even measurements? I typically get something like w 1920.4px & h 1080px. When I try to change the width to 1920 the height adjusts as well. I know there is a simple fix for this but I can't find it.
View 3 Replies View RelatedXara :: Set A Snap Grid With Width And Height
Jun 6, 2011I am a professional web developer and I have been trying to do something for a while, well thats not quiet true I have achieved this but I cannot believe its as complex as it appears to be. I want to create CSS Sprite pages, I have looked at the graphic library with its buttons and to be honest they are great but I cannot get over how you can split the mouse over images from the static none roll over images within the layers section.
Just finally can I set a snap grid with a width and height so for example I want a grid of width 100 and height say 35? again to aid in me creating CSS Sprite pages.
Xara :: Change Stroke Width Anymore?
Feb 7, 2012I have attached a file.
Is it possible to change stroke with of the green shape?
My Xara goes to None and 1,78px only, I think I've magically fixed it to 1,78px stroke width, not knowing how.
Xara :: Keyboard Shortcut To Change Line Width
May 4, 2013Is there maybe keyboard shortcut to change the width of a Line?
For example similarly as at texts the Ctrl + Shift + < and Ctrl + Shift + > do that, changing the text size down or up.
Xara :: How To Unlink Pages / Height / Width Properties Shared
May 22, 2011I somehow screwed up all my pages so that they're linked together to share all the same width and height dimensions. I need some pages only a certain height and others shorter, taller, etc. When I edit the size to say 1000x width and 3000x height somehow all the other pages either lengthen or shorten and cut content.
View 1 Replies View RelatedXara :: Scale Line Width Options Icons Located?
Sep 4, 2013Where are the Scale Line Width options Icons located?
View 2 Replies View RelatedXara :: (4.0.1.5601) Line Alignment On Centers Or Post-width Edges?
Oct 25, 2012Version 4.0.1.5601
I'm not in good command of the Xara model here. If I create a move a series of copies lines (in effort to, say, make a grid), if I move the line from the bottom upwards it tends to align on the top edge. If I move from the above downwards, it tends to align on the bottom edge.
However, not always. <----this spooks me a bit.
This is with "align to grid" on, but "align to object" off.
Is there a way to have the line path itself (the infinitely thin middle of the line) align to the grid? I'm assuming that I can then worry about line joins (mitre, butt, etc.) separately.
Xara :: Latest Version Set Line Width Not Working In Flyout Menu
Oct 28, 2011I recently downloaded and installed the latest version update. Everything seems to be working fine. However, one thing is not. The Set line width box in the flyout menu does not allow typing in a custom number. I thought it might have been a problem with my Cintiq but it is the same on my main monitor.
The Set line width box in the main toolbar works fine. But the one in the flyout doesn't work. I can select a setting from the dropdown list but just can't type in something like 1.5. It doesn't matter if I use my number pad--with the numlock on--or the keyboard numbers. Another strange thing I just noticed, when trying to type in a number in the flyout box, I cannot type 1 or 2 or a period but I can type in 0,3-9 although none of these changes the width of the line.
This worked okay in the previous version so perhaps it is a bug in the new release? (7.1.2.18680)
AutoCAD Inventor :: Copy All Information From QTY Column To PartQty Column
Oct 17, 2013In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedRevit :: Slanted Column Meets Beam / Column Joints
Feb 7, 2012I have a problem inserting the slanted columns when I use the "Beam/Column joints" commando. When I insert the slanted column, the beams are divided.
It should look like picture 1, but it always ends up as image 2. How can I solve this?
AutoCAD Visual LISP / AutoLISP :: Text Width Before Text Creation
Mar 2, 2013I want to know is there any formula/calculation for the width of text object before creation/insertion? At now I used approximated width size via a simple .
(Defun GetStrWidth (str H W) (fix (*(* H W) (strlen str))));;usage: (GetStrWidth "This is a Text." 2.5 0.8);;H: TextHeight; W: width factor.
I know that for the existed text in drawing I can use textbox command, but for the texts that has not been created, what can I do? Is there any formula/calculation depends on font name, text height and width factor?
Illustrator :: Column Break When Working With Text?
Jun 19, 2012I have an illustrator file with some text flowed in and the area type options setup to create two columns. I would like to have a paragraph break move to the second column using some sort of column break (number enter key in indesign). Is this possible in illustrator?
CS illustrator 5.5
Lightroom :: Making Two Column For Text Page?
Jan 19, 2014Lightroom may have a great photo editing set of capabilities, but text soooo leaves a lot to be desired. Why isn't there a template in the book module for two columns of text on a page. It seems like a no-brainer.
View 4 Replies View RelatedAutoCAD 2013 :: How To Change Name From Column To New Column
Oct 21, 2013my drawing file , have block name 'column' but i want to change name from column to new column.
View 2 Replies View RelatedAutoCAD Architecture :: Column Bubble Text Mirrored
Aug 23, 2013I am using the Enhanced Custom Grid in Architecture 2014. Everything is right about the grid except that the text inside the bubbles is mirrored. I am looking at the plan view (not the bottom) and my UCS is square to the world so I'm not sure what's going on.
View 4 Replies View RelatedAutoCad 2D :: Dynamic Block Via No Column In Multiple Text
Sep 12, 2012I am using AutoCAD 2011, there are new options of "no columns" "dynamic columns" and "static columns" for multiple text. I am used to "No columns" but it seems to be set to "Dynamic columns" by default, wonder if there is any setting to change default to "No columns". Or any Lisp can be used.
View 1 Replies View RelatedAutoCAD Inventor :: Format Column Header To Wrap Text?
May 7, 2013aIs there a way to Format the Column Header to wrap text & rotate text if necessary? I would prefer if I could only Format the QTY Column Headers, but leave the others s is.
View 2 Replies View RelatedCorelDRAW Graphics Suite X6 :: Copy / Paste From And To Multi-column Text Box?
Apr 5, 2013I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
AutoCAD Inventor :: Changing Text In Description Column Of Hole Table
Nov 7, 2013I'm trying to change the value in the description column through the formattedtext but the final result is not what is supposed to be, this is a part of my code.
Sub HoleTab()Set oDrwDoc = ThisApplication.ActiveDocumentDim oSheet As SheetDim i As IntegerSet oSheet = oDrwDoc.ActiveSheetDim oHoleTables As HoleTablesSet oHoleTables = oSheet.HoleTablesDim oTable As HoleTableDim oTableRow As HoleTableRowDim oTableRows
[Code] .......