I am using the Enhanced Custom Grid in Architecture 2014. Everything is right about the grid except that the text inside the bubbles is mirrored. I am looking at the plan view (not the bottom) and my UCS is square to the world so I'm not sure what's going on.
View 4 RepliesWe are looking for a column grid bubble dynamic block that will allow us to place horizontal or vertical grid lines while the text in the bubble remains in the upright position.
Another thing we need is to allow for column lines close together without overlapping bubbles. In other words, we need to have the ability to have a diagonal line from the bottom or side of the bubble to the column line which allows us to have all bubbles aligned no matter how close the columns grid lines are.
The attribute in the bubble has to be able to have XX.X to fit within the bubble with the first to X's to be either Alpha or Numeric and the last X to be Numeric only.
Can this be made to be Annotative too?
When creating text in model space it appears both mirrored and rotated 90 degrees to the horizontal. However, when I create text in paper space it is fine. I have tried looking at the properties for the text but although I can find a place to rotate the text back to the horizontal it is still mirrored and therefore unreadable.
When I copy paste stuff from one document to another this also occurs.
I'm having an issue with creating a column bubble block that would have an attribute and both be annotative.
I've created a 3/8" dia circle with 3/16" text and the text is NOT annotative. The bottom of the circle is at 0,0 with the text justification at MC
I create the block of the circle and text and make it annotative and save
When I insert it into another drawing, the block inserts properly and scales as desired. The issue is when inserted, I'm NOT given the option to fill in the column # attribute. I can double click and enter text, but this should happen during insertion.
When I create the block, if I do NOT select the attribute as part of the block, I am given the option for the attribute during insertion but it does not scale automatically.
What am I doing wrong? I'm attaching my block as an example.
I want my leader line to always have an 'invisible extension' that goes through the centre of the bubble (unlike the attached image)
how do I do this?
When I insert text with either the TEXT command or MTEXT command, the text is displayed mirrored. This doesn't seem to have anything to do with the MIRRTEXT variable because that is used when I'm actually mirroring the text. In my case, the text is mirrored as soon as I insert it. How can I get it back to normal? Is there a variable I'm missing?
I'm using AutoCAD LT 2012 .
I am facing a problem with text. When I am using an Arabic text , it works fine while drawing in 2D. While ploting it got mirrored and got upside down...
View 3 Replies View RelatedI have the problem that the text in text boxes and measurements are displayed wrong. They are somehow mirrored. I tried to many settings but still it didn't changed. To show the problem better I added a picture of the problem.
I use Autocad 2013 on a 64 Bit Win 7 Professional SP1.
Using the same template Text and Dimension style all of the sudden the text is vertical and mirrored and the dimension text is mirrored under the dim line ( above the dim line in normal conditions)
What could be the problem? I did not change anything in the settings, voluntarily, I use this template for years and never had a problem with it till now.
See the bubbled text in the attached PDF.
Same drawing (attached) with identical settings printed on one PC using DWG to PDF - creates this:
on another PC this:
So, some angle and aligned length dimensions are mirrored.
PDF previewed with Adobe Reader and Foxit PDF reader.
File is created and printed in 2010 LT, hence no UCS rotation, text style and print settings unaltered.
ACA 2012: Is it possible to add a column to my door and window schedules that automatically shows the area of the door/window(or area of Glazing) and then have a total area column at the bottom of the column?
View 3 Replies View RelatedI have a floor plan that is shaped like an 'L' and I'd like to have the grids in the corner of the 'L' be at a 45 degree angle in relation to the rest of the grids. Is that possible in 2012? I have tried to do it using the Custom Grid Convert tool and have had no luck.
View 1 Replies View RelatedI have a W1`2x40 structural member in a column position. I am cutting elevations, I want the web to show as hidden but can't seem to get it to work. I have attached the drawing with my 2d elevation style.
View 1 Replies View Relatedwhen creating a schedule with a simple formula column (e.g : [QUANTITY]*Width), the formula column total doesn't add the formula results for a grand total. The total shown is the addition of Width of element.If I try and enable "Apply formula to totals", the total is : total quantity*total width instead of just a simple addition of formula resulting values.
For example:
I have 4 windows of 2 different styles.Two windows have a width of 2 meters, the other 2 windows have a width of 3 meters. I want to find out, my total window width, of all window styles.Therefore, i make a schedule with the following columns: QUANTITY, WIDTH and TOTAL WIDTH. The total width column is a formula column (Quantity*Width). The total of the formula column (Quantity*Width) doesn't add the resulting values (2*2+3*2=10), it only adds the simple widths without multiplication with quantity, my result is 5, wich is incorect. If i enable "Apply formula to totals", it multiplies total quantity (4) by total width (5).
I'm trying to set up pipe styles that have a linetype with text in them. For example ------SFM------. They work fine for straight pipes. However on a curved pipe the text goes all funky. Not only is the text backwards it is also mirrored.
Is there likely something wrong with my linetype definitions or is that normal behavior with civil 3d pipes?
Using Architecture 2012 and seem unable to get a column grid to show automatically in elevation views. Looks fine in plan view, bubbles etc all working once we sorted out annotative setting .
View 3 Replies View RelatedI'm trying to design a flyer for a foam party and I want a bubble effect for the text. What approach do you think will produce the best effect? Here's a flyer with an effect similar to what I want (look at the word FOAM).
View 9 Replies View RelatedIs it possible to insert a project detail field in a sheet column?
View 2 Replies View Relatedwhen creating a schedule with a simple formula column (e.g : [QUANTITY]*Width), the formula column total doesn't add the formula results for a grand total. The total shown is the addition of Width of element.
If I try and enable "Apply formula to totals", the total is : total quantity*total width instead of just a simple addition of formula resulting values.
For example:
I have 4 windows of 2 different styles.Two windows have a width of 2 meters, the other 2 windows have a width of 3 meters. I want to find out, my total window width, of all window styles.Therefore, i make a schedule with the following columns: QUANTITY, WIDTH and TOTAL WIDTH. The total width column is a formula column (Quantity*Width). The total of the formula column (Quantity*Width) doesn't add the resulting values (2*2+3*2=10), it only adds the simple widths without multiplication with quantity, my result is 5, wich is incorect. If i enable "Apply formula to totals", it multiplies total quantity (4) by total width (5).
I need a solution for having the corect total on the formula column.
I need to start doing shaped glass drawings for our new glass supplier who insists everything is viewed from outside. Unfortunately all our drawings are viewed from inside and I don't want my team to be responsible for copying and flipping glass details in case they forget to flip one day.
I can obviously mirror the viewport view by clicking View/Views/Bottom but this is also mirroring any text dimensions, even though my Mirrtext preference is set to 0.
Is there a way to set a dimension style where the text is automatically back to front so it will then appear the right way round in that particular viewport. How to get round this problem without duplicating parts that can then get missed at a later date and not amended?
This needs to work in both AutoCAD 2014 and AutoCAD LT 2014 as we run a mixture in our office.
I have been desperately searching for ways to precisely surround my text with a bubble stroke. I need this shape to strictly adhere to the text's form rather than loosely surround it. The resulting shape will need to enclose both the top and bottom text, which ultimately will form a logo. I just want to clarify, I am not looking to simply apply a stroke around the letters. Again, I am trying to outline the entirety of this image with a precise shrink wrapped bubble.
I realize this is possible with the pen tool; however, my hope is to discover a more accurate and simple technique.I have posted an image of my situation, which illustrates my initial attempt to pen around the text.
I have my video and what I would like to produce is have a text bubble pop up with a picture inside of it instead of text. I need to have a border around the bubble as well.
View 2 Replies View RelatedI've been having this issue happen repeatedly, but not consistently. In a new file, I adjust the width of an mtext box so that the text wraps into multiple lines. When I next open the file, all mtext boxes are back at a wider width so that the text is all on one line. The start of the text is also usually in a different location. This was happening on 2011/XP and now on 2012/Windows7.
View 5 Replies View RelatedI want to flip the text, like in the image. Are there any posibilities to do so? The text that is down is the mirror of the text that is up. I've tried to mirror the text, that is down, but no result...
View 2 Replies View RelatedIn Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedI am using AutoCAD 2011, there are new options of "no columns" "dynamic columns" and "static columns" for multiple text. I am used to "No columns" but it seems to be set to "Dynamic columns" by default, wonder if there is any setting to change default to "No columns". Or any Lisp can be used.
View 1 Replies View Relatedmy drawing file , have block name 'column' but i want to change name from column to new column.
View 2 Replies View RelatedaIs there a way to Format the Column Header to wrap text & rotate text if necessary? I would prefer if I could only Format the QTY Column Headers, but leave the others s is.
View 2 Replies View RelatedI'm trying to change the value in the description column through the formattedtext but the final result is not what is supposed to be, this is a part of my code.
Sub HoleTab()Set oDrwDoc = ThisApplication.ActiveDocumentDim oSheet As SheetDim i As IntegerSet oSheet = oDrwDoc.ActiveSheetDim oHoleTables As HoleTablesSet oHoleTables = oSheet.HoleTablesDim oTable As HoleTableDim oTableRow As HoleTableRowDim oTableRows
[Code] .......
Several times, we generate a drawing, and the text widths in the columns vary greatly. Some have text that is ten characters long, and others have thirty-plus characters.
Is there a way to be able to select the table (or perform the command to all tables in the current layout) and have each of the columns expand to the appropriate width, that depends on the longest string of text in that column, for each column. The problem I see, is that some tables have two columns, some have six, and of course other with any number in between. The same is also true for the amount of rows.
I'm trying to create an iLogic rule that will print a text string to a cell or column of a parts list in inventor.My code so far...
Sub Main()
On Error Resume Next
Dim oDrawDoc As DrawingDocument
oDrawDoc = ThisApplication.ActiveDocument
[code]...
I want to print what is in the MessageBox into a cell in the parts list, and i am stumped.The cell i am trying to print to is a custom property in the Parts List.