I want to flip the text, like in the image. Are there any posibilities to do so? The text that is down is the mirror of the text that is up. I've tried to mirror the text, that is down, but no result...
View 2 RepliesWhen I insert text with either the TEXT command or MTEXT command, the text is displayed mirrored. This doesn't seem to have anything to do with the MIRRTEXT variable because that is used when I'm actually mirroring the text. In my case, the text is mirrored as soon as I insert it. How can I get it back to normal? Is there a variable I'm missing?
I'm using AutoCAD LT 2012 .
I am facing a problem with text. When I am using an Arabic text , it works fine while drawing in 2D. While ploting it got mirrored and got upside down...
View 3 Replies View RelatedI have the problem that the text in text boxes and measurements are displayed wrong. They are somehow mirrored. I tried to many settings but still it didn't changed. To show the problem better I added a picture of the problem.
I use Autocad 2013 on a 64 Bit Win 7 Professional SP1.
Using the same template Text and Dimension style all of the sudden the text is vertical and mirrored and the dimension text is mirrored under the dim line ( above the dim line in normal conditions)
What could be the problem? I did not change anything in the settings, voluntarily, I use this template for years and never had a problem with it till now.
See the bubbled text in the attached PDF.
Same drawing (attached) with identical settings printed on one PC using DWG to PDF - creates this:
on another PC this:
So, some angle and aligned length dimensions are mirrored.
PDF previewed with Adobe Reader and Foxit PDF reader.
File is created and printed in 2010 LT, hence no UCS rotation, text style and print settings unaltered.
I am using the Enhanced Custom Grid in Architecture 2014. Everything is right about the grid except that the text inside the bubbles is mirrored. I am looking at the plan view (not the bottom) and my UCS is square to the world so I'm not sure what's going on.
View 4 Replies View RelatedI'm trying to set up pipe styles that have a linetype with text in them. For example ------SFM------. They work fine for straight pipes. However on a curved pipe the text goes all funky. Not only is the text backwards it is also mirrored.
Is there likely something wrong with my linetype definitions or is that normal behavior with civil 3d pipes?
Please take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
I need to start doing shaped glass drawings for our new glass supplier who insists everything is viewed from outside. Unfortunately all our drawings are viewed from inside and I don't want my team to be responsible for copying and flipping glass details in case they forget to flip one day.
I can obviously mirror the viewport view by clicking View/Views/Bottom but this is also mirroring any text dimensions, even though my Mirrtext preference is set to 0.
Is there a way to set a dimension style where the text is automatically back to front so it will then appear the right way round in that particular viewport. How to get round this problem without duplicating parts that can then get missed at a later date and not amended?
This needs to work in both AutoCAD 2014 and AutoCAD LT 2014 as we run a mixture in our office.
When creating text in model space it appears both mirrored and rotated 90 degrees to the horizontal. However, when I create text in paper space it is fine. I have tried looking at the properties for the text but although I can find a place to rotate the text back to the horizontal it is still mirrored and therefore unreadable.
When I copy paste stuff from one document to another this also occurs.
How to flip the text in my circle using Photo Shop CS6 (cloud version).
I made McDermott as one layer, then photography as another layer. I want Photography to be right side up within the circle, it's upside down as it is now.
Here is a logo I am trying to create for my photography. Once I get the Photography font turned right side up, I will insert a large M in the circle - but 1st things 1st.
I feel like I am going crazy, but for the life of me I cant figure it out. I am on a mac using version 16.0.0 and the "f" key works when I am not using the tool, for its other function, but as soon as I start to draw it wont work. I tried deleting the prefrences and everything.
View 2 Replies View RelatedWhen I put a flip option on a text in Dynamic Blocks, during the flipping the text is mirrored. is there any way to preventing this?
View 9 Replies View RelatedI own a printing business, and just recently purchased Creative Cloud, and started using Illustrator for my custom designs. I need to figure out how to flip or mirror the image, so it's being viewed backwards. This is done for transfer paper printing, so that the letters print right side up, instead of backwards and unreadable. There must be a mirroring function right?
View 2 Replies View RelatedI want to flip a drawing vertically. I want what is on the bottom on the top without rotating the left and right.
View 5 Replies View RelatedI'm trying to make a dynamic block with attribute text. I've made a FLIP action to it but the text will not follow.
In the Command Window i get this text
Select objects: Specify opposite corner: 16 found
Select objects: 6 unlocked AttDefs filtered from selection.
I find myself digging this option from the transform pane all the time, is there a way to assign a shortcut for this simple operation?
I can't get a hang of the Reflect-tool for some reason, it's quite clumsy.
I have been trying to convert my offices blocks to dynamic blocks and this one is giving me a hassle.
Essentially we have a line with an arrow at the end of it to show drainage pathways. I added a multiline attribute so we can add the percentage along the line with a mask. The line, arrow and attribute all need to be able to be aligned perpendicular or tangent to a given line. Everything looks great until the arrow flips sides to work from the other direction and then the text is mirrored backwards.
Mirrtext is set to 0 and I even tried it while in the Beditor to see if there was independent. Multiline or Regular attribute have the same effect as well as if they are locked position or not.
I tried adding a flip, but then the mirrortext settings work just fine and the text won't flip back.
I have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
View 9 Replies View RelatedI have a machine and I want to make it look like it's sitting on a shiny smooth surface, and I want it to reflect on the surface.
I have played around with the liquify and I am apparently very bad at it because it just distorts it too much. I want it to be a fairly clean replica, like a mirror.
User insert a block . then rotate it (Say 45 degress) . then mirror it.
Now My program read that block properties ( Rotation ) and try to replace that with another block .
But becuase the original one is mirrored. you know what happens !.
So I have to know whether the original block is mirrored or not. Then if yes I mirror the inserted one by program as well
Seeing flipped objects losing edges, and gaining edges?
This is in Nitrous (haven't tested DirectX).
Symmetry works out ok - just the mirror tool giving bad results. Works fine in 2011.
I am trying to make a cool desktop for myself. (attached image of how far i am so far) i want it to be the logo i made reflecting off of a black floor or really dark water, with sparks bouncing off of the logo and the ground/water.
View 4 Replies View RelatedFor our bespoke AutoCAD plugin we can not use mirrored blocks or those with extrusions.
I know I can find mirrored blocks by quick selecting scales of less than 0, is there a similar way to select blocks with a negative extrusion?
Even better would be a process (LisP?) to select all the blocks that are mirrored or have negative extrusions.
I have about 4 TB of images on an external drive: a DROBO (call it D1). I have another DROBO (call it D2) that is a mirror of D1 updated hourly by Chronosynch. How can I (hopefully easily) tell Lightroom to now use D2 instead of D1?
View 2 Replies View RelatedWe use a table with an inserted jpeg image (company logo) as our title block. Everything works fine when you start a new drawing, however, when one tries to insert the template into an existing drawing or thru a new layout, the table that is our title block comes in mirrored with the rows and columns all out of whack.
View 6 Replies View RelatedI have an ipt A and its dwg. I have an ipt B that is the derivative and mirrored ( I use derive command whit flag on mirror part) component from ipt A.
Is there a way to not create the dwg of B ex novo? I have the same dwg but I have to re dimension all.
I have a sheet metal part with a fully dimensioned drawing made for it. I then make a mirrored (derived) part out of the original. Is there an easy way to get a fully dimensioned drawing of that mirrored part?
I have tried making a copy of the original parts drawing and then replacing the model that is referenced in the drawing but that just gets me a drawing with a bunch of pink dimensions and I have to drag all the dimension points to reattach them.
I have inv2014 , and im having a problem whenever i mirrored a part in assembly. A hidden dimension of a part always shows up after i mirrored it in assembly, and then i have to go to that part in assembly and turn off the visibility of that sketch/dim.
View 1 Replies View RelatedI am going out to see a client tomorrow and wondered if any of you have came across a problem like this before??
They are inserting images, mainly their logo and all looks fine untill they print...
When printing the images are all mirrored and flipped? I have tried it in my office and all prints fine.. Obviously this points to his printer but I am not so sure....