Xara :: Latest Version Set Line Width Not Working In Flyout Menu
Oct 28, 2011
I recently downloaded and installed the latest version update. Everything seems to be working fine. However, one thing is not. The Set line width box in the flyout menu does not allow typing in a custom number. I thought it might have been a problem with my Cintiq but it is the same on my main monitor.
The Set line width box in the main toolbar works fine. But the one in the flyout doesn't work. I can select a setting from the dropdown list but just can't type in something like 1.5. It doesn't matter if I use my number pad--with the numlock on--or the keyboard numbers. Another strange thing I just noticed, when trying to type in a number in the flyout box, I cannot type 1 or 2 or a period but I can type in 0,3-9 although none of these changes the width of the line.
This worked okay in the previous version so perhaps it is a bug in the new release? (7.1.2.18680)
I'm so excited to recieve my new CD in the post but... I am halfway through a design project, and if I install the new latest version Xara Photo & Graphic Designer 7
1. Will my old Xara X1 (cd version) files work in latest version if I upgrade/install XP/GP7?
2. and will they be 2 stand alone programs and can switch between the two? or overwrite each other>?
At this time I am unable to locate my original cd, which has been in mass storage, so I fear installing just to find out, otherwise I wouldnt have asked this forum, backed up my design project and tried this already.
I'm working on a project, and all of a sudden when I ad a outline line width to an object the outline seems transparent to me. I can get it to stop doing this with copying other objects in the scene that have a solid line around them, but as soon as I go back to the other items the transparent line width starts happening again.
I'm doing Gary's Create a Sunflower and pot (July 2008) tutorial and just as always I run into problems combining/converting shapes. I believe I have followed the tut exactly and the only thing my lines do is taper at the bottom.
Also, I'm using Designer 7 and there is no option for changing line width to 6 px, only 4 and 8. So I'm using 8 pxls. I tried typing in a 6 and hitting enter but it doesn't accept a 6.
I'm not in good command of the Xara model here. If I create a move a series of copies lines (in effort to, say, make a grid), if I move the line from the bottom upwards it tends to align on the top edge. If I move from the above downwards, it tends to align on the bottom edge.
However, not always. <----this spooks me a bit.
This is with "align to grid" on, but "align to object" off.
Is there a way to have the line path itself (the infinitely thin middle of the line) align to the grid? I'm assuming that I can then worry about line joins (mitre, butt, etc.) separately.
Since installing 14.1, flyout items in drop down menus have started appearing to the left of the drop down menu not the right. Grateful to know how to fix this.
I typed "text" in the help box, did a bunch of reading, but didn't see the answer to this. I have two colored text.....a thin line in one color and an inner color. How do I increase the thickness of the outer line?
I am not able to update photoshop CS6 to the latest version. I have this problem on two computers. I get an error message which refers me to a file in the ../common filesadobeinstaller directory, but the file is not readable (gz). I have repeatedly tried to install the update. I have de-installed the program and re-installed it, but am still unable to apply the update.
AutoCAD Map 2010 has just been installed in my PC and since i first runned AC the command line, menu browser and key commands don´t work. This way I can´t do anything.
Trying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
I have Creative Cloud subscription and Photoshop 3D Extrusion used to work fine (though slow).
After latest update several days ago it stopped working, displaying an error message instead:
"The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly"
The Graphic Processor is enabled, and the driver is working fine.
Is this a bug or a "feature" in new version? How to make it work as before the update?
I am looking to draw my pipe with a thicker appearance than the typical line of width "0". Our storm pipes are usually drawn with this so as to stand out from other utilities. If the pipe is represented by a polyline, I have usually adjusted the "Width" or "Global Width" value to my liking. With pipe objects, it seems more complicated. I have searched the settings, and the closest thing that I could find was the Lineweight property, but that appears to have no effect on the line thickness in the CAD drawing.
Do I need to tweak a plot setting? Make a new linetype altogether?
Is there a way that I can make the length of the dropdown menu (shown below) for the Dimension Styles longer? It is difficult to select the correct dimstyle.
Where is the option to control page width & height so that you can make both even measurements? I typically get something like w 1920.4px & h 1080px. When I try to change the width to 1920 the height adjusts as well. I know there is a simple fix for this but I can't find it.
I am a professional web developer and I have been trying to do something for a while, well thats not quiet true I have achieved this but I cannot believe its as complex as it appears to be. I want to create CSS Sprite pages, I have looked at the graphic library with its buttons and to be honest they are great but I cannot get over how you can split the mouse over images from the static none roll over images within the layers section.
Just finally can I set a snap grid with a width and height so for example I want a grid of width 100 and height say 35? again to aid in me creating CSS Sprite pages.
I somehow screwed up all my pages so that they're linked together to share all the same width and height dimensions. I need some pages only a certain height and others shorter, taller, etc. When I edit the size to say 1000x width and 3000x height somehow all the other pages either lengthen or shorten and cut content.
When installing an upgraded version of Designer or Web Designer, Xara never overwrites or uninstalls the old program like many software companies do. Is there any problems encountered with data files or anything else if you just uninstall the old program through the Control Panel (Windows)?
I downloaded the 32 bit version of 9 and installed it on my 64 bit laptop.I went that way as I read the 64 bit doesn't support all features and I know my GIS software doesn't in similar type of installations.
I couldn't find any more about running 32 bit version on 64 bit device so expected it should work okay.EDIT - After installation I was prompted with this fact but it did say no problem with running it that way.Just mention here as others may be confused and wonder which version will work on a 64 bit machine.
But when I got past the installation and onto registering it for an extended 30 days I was blocked with the message CSRF blocked...
In Photoshop CS6 under the view menu "print size" has been removed in version 13.0.4. Until 13.0.3 it was still there. Is there a good reason for it? Any known alternative? Workaround? I did use it a lot and miss it. On my main workstation I even went back to 13.0.3.
My guess is, that for "print size" showing the correct size on a given screen, the relevant screen resolution had to be set in preferences, and one had to know it, otherwise "print size" showed inproper size on screen. That might have led to remove it to not confuse retina screen users?
i started using autocad 2010 in my newly joined office. on using the di command from the inquiry, toolbar a drop down menu appears. after i have selected two points between whom the distance has to be mesured , i have to select an option [as seen in the screenshot]. is there any way to expand the inquiry toolbar just like it used to be in the extended form in version 2009 and older??