Xara :: Ovals Round A Circle?
Mar 10, 2012
Senility has set in, and I can no longer remember how to stick ovals around a circle. Need to do this for a client's site, for a gallery (patterns in the little ovals will show large in the middle), but think this is more a graphics question at the moment than a web question. This mock up was done in Illustrator by the client. I know Xara can do this easily, if I could only remember how. Have a feeling i have seen a tut illustrating this, but haven't been able to unearth it. Thinking it might be a blend, but not sure. Can't persuade things to go round the circle, nor work out how to keep them equidistant. I am such a newb.
View 9 Replies
ADVERTISEMENT
Dec 30, 2013
How to arrange the circle like a round circles, same distance from each? I'm using Illustrator CS6.
Which tool should I use?
Also the "London" How to make it a little curve in CS6 illustrator?
View 4 Replies
View Related
Sep 22, 2012
Designer Pro X: I've done this one time before and for the life of me I can't remember how, and can't find anything in search or in the manual. I made a rectangle and need to know how to round the corners. I know I'm gonna' kick myself when I find out.
View 9 Replies
View Related
Oct 29, 2013
How do I make a round object really really round? I keep getting this chiseled look no matter how I set it. The top and bottom of a rectangle have a cut glass look and I want this to be completely ROUND. Not just the top and bottom, but the whole thing needs to be round and beveled.
View 8 Replies
View Related
Jan 24, 2012
These are a pair of video tutorials that I did some time ago. They are intended for beginners but you never know what you might learn. The first tutorial is for how to draw a round button and the second is for how to turn it into a web button. They are related so that is why I posted both of them together here.
View 6 Replies
View Related
Sep 16, 2007
I need to make an 11x14 composite page for a school. I am shooting photos of all of the students and they want an 11x14 with the school name and all of the students faces in ovals . I would need about 200 ovals, one for each student.
way to do this? Layers? Masks?
View 8 Replies
View Related
Apr 16, 2013
I'm creating a logo that uses two ovals, an innner and outer one. I'd like the outer one to be an exact, larger version of the inner one and look perfectly proportional to the inner one.
However, as you'll see in the attached, the top version (made up of the inner oval and then a 10% expaned version of it around it as the outer logo) doesn't look as proportional as the the bottom version (made-up of the inner oval and then an outer oval I drew myself that I thought looked good.)
Is there a way to create an exact, larger version of the inner oval (to use as the outer oval) that will look and be exactly proportional to the inner oval? Or is the way I'm doing it (drawing it to look as close as possible a fine way to do it)?
View 5 Replies
View Related
Apr 24, 2011
how to take a segment out of a circle _ I ma sure it's dead simple but I just can't seem to do it. I need to take a 30 degree "pie slice" out of a 3d circle.
View 4 Replies
View Related
Mar 14, 2013
how to draw just half a circle in Xara Designer. The background of the design must be transparant.
View 7 Replies
View Related
Jul 7, 2013
I'm struggling to do the most simple thing - draw a circle outline. In PSE, all you have to do is hit the circle marquee button, then use Stroke. But how the heck do you do it in Xara?
View 2 Replies
View Related
Oct 2, 2011
Well, I bought Xara Designer Pro 7 the other day, and I'm trying to get used to it. One thing it's doing that really bugs me is that when I draw a circle or an oval in freehand, the circle fills in with solid color!
View 4 Replies
View Related
Mar 22, 2012
Is there a method to evenly distribute objects around a circle? I understand the horizontal and vertical alignment tools, but I'm not sure how to apply them in this situation. Attached are a sample picture of what I want to accomplish and the .xar file (XDP7).
Circles01.xar
View 9 Replies
View Related
Jun 29, 2013
how do I make Font Lettering form in a circle?
View 5 Replies
View Related
Apr 10, 2011
I have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
View 3 Replies
View Related
May 22, 2012
Using: Xara Photo & Graphic Design 6
AMD Athlon II X2 255 Processor 3.10 GHz
2.00GB (1.75 GB usable) RAM
64-bit OS
I follow the tutorial in the Xara Help, but cannot get the results shown. I draw the circle, compose the text, and set it to the middle Select both circle and text Arrange/Fit Text to Curve....the text appears around the lower, right side of the cirle After all this I am unable to manipulate the text (It's a piece of cake to do this in Publisher 2010, but it has some minor problems in appearance)
View 2 Replies
View Related
Dec 18, 2011
I need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies
View Related
Apr 28, 2013
I was wondering the best way to draw a circle that passes through an endpoint of a line and then is tangent to another circle above it? I need to create a radius of 3.5 between the two points.
View 9 Replies
View Related
Nov 24, 2013
I have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies
View Related
Jul 31, 2009
Trying to lay a dime on a nickel, without the "squares". In otherwords, how do I cut out each coin and lay them on top of each other so each coin shows and isn't hidden by the top coin?
View 2 Replies
View Related
May 29, 2003
I'm trying to figure out how to make rounded forms with photoshops..
View 2 Replies
View Related
Mar 2, 2009
what i have is a wall decal im trying to finish up. I'v gotten it to size and everything, but there are some very rough edges which i cannot get rid of. i''ve tried everything that comes to mind. anyone have any tricks that you can share? basics?
View 3 Replies
View Related
Jan 6, 2003
Is there a way that I can make round edge using levels in PS?
View 3 Replies
View Related
Jun 13, 2009
way to add rounded corners to tables and images?
View 2 Replies
View Related
May 9, 2013
How to round down dimensions. I see some topics with writing LISP codes to do it but I have Autocad LT and those cant use LISP codes right? Ive also been looking into the Round off variable in the Primary units for the dimension style but its a little confusing. What I want to do is just round down my dimension at the given precision.
Lets say I have my precision set to .000 (even though I may have dimensions with .00) I want my dimension of 2.875500 to round down to 2.875 and not up to 2.876 then I also have a dimension of 2.90952929 and I want that to round down to 2.909 and I can not find a way of getting both of these to round down with the same setting on the same dimension style. Basically I just want to truncate my dimensions.
View 8 Replies
View Related
Aug 11, 2012
I filled a transparent layer with blue sky, opened another layer and used the elliptical marquee tool to draw a round sun, and filled with yellow. I then blurred the edges with a simple keystroke, but can't remember what I did.
View 6 Replies
View Related
Jul 17, 2013
I'm editing photographs of tabletop ceramics - plates, etc. and often images are shot off center and I have to make them round.I use the Filter Lens Correction Feature with some success and the Warp feature to fine tune - but it's all eyeballing the image which isn't accurate.
Any feature for this process or a grid that will enable me to ensure they are round? Windows CS5 Photoshop -
View 3 Replies
View Related
Apr 2, 2012
I know just enough to get by in Photoshop but have had zero training, so I tend to jimmy rig everything until it looks okay. I am stumped on this one though.
I bought a web template and am modifying the images to what I need them to be. I can not for the life of me figure out how they did this rounded corner and shadowing on the corner. I can easily, manually copy the two lines going up the sides of the image. (Jimmy rig) ... but I can't seem to get the corner to look right.
I know it looks like a drop shadow, but you'd need to know all the colors and exact settings to copy that drop shadow and all i have is the finished product.
View 2 Replies
View Related
Oct 18, 2011
I am trying to make a round monogram such as this:
Round Monogram.htm
I have seen an old post about using the line tool and making it by hand but i am having a hard time doing that. the monogram will be cut out in vinyl (car decals) so i need to be able to make all the letters. I have tried the envelope tool but that just wraps the letters around the circle like a sphere shape.
Is there an easier way to do this? It would be nice to be able to do triangles also but I need to conquer this one first :)
View 13 Replies
View Related
Aug 4, 2013
At roundabout, chain age at central alignment is connected to main roads alignments as it should be. problem is sometimes it is continuous chain age and some time it shows -ve chain ages and sometimes it starts from 0+000.00. I want it should start from 0+000.00.
See attached screen shots for reference.
View 9 Replies
View Related
Nov 25, 2011
I tried unsuccessfully to create a lip around a curve surface and there is no flat plane to select for the sketch. Wonder if this could be done in Inventor. My version is 2011.
View 4 Replies
View Related
Aug 14, 2006
I wanted to make some icons. I wanted them to be a rectangle with round corners.
I try making the icon and saving it as a PNG, but the corners are still visible.
I opened an example png icon, the background is the grey and white checkers, which i know mean theres nothign there.
View 2 Replies
View Related
