I tried unsuccessfully to create a lip around a curve surface and there is no flat plane to select for the sketch. Wonder if this could be done in Inventor. My version is 2011.
View 4 RepliesI have two cylinders that are at a right angle to each other and was wondering how to create a fin to "wrap" around the round edge and then intersect with the flat side of the other cylinder.
View 1 Replies View RelatedIn Inventor 2010 we have a sheet metal, with a lot of different straps. But we cannot create round jogs between them. It's only possible, if all straps are created at the same time with the same size etc.
Please see the attached file. The upper version, is the one, it looks in the moment and we want an apperance like the lower one.
Is it possible? Because we cannot add all the round holes later on in development of the sheet metal.
I need some direction. I know what I want to do but can't find the right tools in the photoshop toolbox to accomplish the task. I want to create a top down view of a single green LED. I want it to have the illusion of a rounded dome and some sort of highlight like the room light was bouncing from a point in the rounded surface. I've played around with the ellipse tool to create the green circle and several attempts using the blend modes, bevel emboss and inner glow. Nothing seems to come close to what I want.
View 4 Replies View RelatedThese are a pair of video tutorials that I did some time ago. They are intended for beginners but you never know what you might learn. The first tutorial is for how to draw a round button and the second is for how to turn it into a web button. They are related so that is why I posted both of them together here.
View 6 Replies View RelatedHow to create an animated gif with round corners? I know to create rounded corners for normal images with the crop function, but I don't know how to make rounded corners for animated gifs.
View 2 Replies View RelatedI am a relative newbie to photoshop - I am trying to create a border around a logo that has rounded edges. I have used to stroke tool and it creates the border. However, when I try and save it and use it it still has square edges.
How do I get rid of the square edges?
how to do a dash line on a round button like attachment?
View 5 Replies View RelatedI haven't used illustrator for a while so I'm really stuck on soemthing that should be simple.
I want to create a shape that has round corners on the bottom and square cormers at the top.
I have created two shapes, one with round corners and one with square one.
I was hoping to put them together then use the pathfinder to unite them but this then make the round corner square.
Is it possible to unite shapes with different corners.
All the default arrowheads are sharp corners. I need to make an arrowhead that looks sort of like Arial Rounded, where the arrowhead itself is rounded at the point and on the ends.
View 9 Replies View RelatedSee the image below:
I downloaded the deaf friendly seal as a vector image from a stock website. Now my co-workers want me to add that "sunburst" round edge and put it behind the round part of the deaf friendly one. Rather than download another vector image of the pointy round thing, I'd like to try to do it myself but I'm not good with Illustrator.
How to create that round object with points around it - maybe a quick and easy way to do it?
how to round a parameter using ilogic.
For example. I have Roperev=Roperev_1. Roperev_1 is determined by an excel equation. I need Roperev to produce a nominal number because this parameter dries a coil revolution and I need the revolution to be a whole number.
I can not just round the excel result because the excel result needs to be multiplied by 2.53 to get the resultant for Roperev_1
Right now I am trying to model a concrete embed plate. The design calls for 1/2" round steel embeds at the contour of the line in the attached image. What is the best way to extrude this line into a 1/2" DIA dowel? I have tried the revolve command and sweep command without any luck... I know the sweep command would probably work the best but I can't seem to draw a 1/2" dia circle perpendicular to the line.
View 5 Replies View RelatedI have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
Is there some super secret option for making fractions in the drawing environment round up to the nearest, for example, 1/16th? There has to be, there just has to be.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
I have a square to round transition that I need formed up and the shop is telling me that they would prefer to split this thing at the corners rather than the flats. I've tried two different ways of doing this but how to handle this part. It's 10.75" OD at the bottom and 2'-4" square at the top and 1'3" in length and made of 1/4" stainless steel plate. The shop wants this in four bent pieces that they can weld together down the corners.
I've tried making just the one side but I'm not getting the results I would like to see. Making the full transition (as in the picture above) gives the finished result I am looking for but I can't separate it into multiple sides.
I've attached the file (Inventor 2013). The sketch shown is a raised lip I'd like to have around a future opening. I actually want that sketch to wrap all the way around the body, but taper down to 0 in the rear as there are to be hinge plates. This is going to be a grill/smoker and there needs to be a 3/8" raised lip at the future seam of the top and bottom. Shown in the model is just the top portion.
View 8 Replies View RelatedI know you can obviously set the tolerance in the styles to round to the nearest 1/16 or 1/32, but is there a way to make it always round a dimension up instead of to the nearest? IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
When creating positional reps in Inventor 2012 SP1 it rounds them to a 3 place decimal. So If I want the constraint to be at 1.1875 it rounds it to 1.188. Is there anyway to change this to 4 place decimal?
View 3 Replies View RelatedI have been trying to fold a round plate which has 10 milimeters thickness.Is there any way to fold this or unfold ?
View 4 Replies View RelatedI have couple of problems that I haven't managed yet on my own.
1. How I can get "smooth" bends without those "steps"? See part: Smooth Bend
2. How I can round that Flange's "inside" corner? Just smooth Corner Round like those other corners have. See part: Corner Round
I have a solid bar which has a diameter equal to the nternal dimensions of a SHS. I am trying to create a weld, basically to fill the gap with a weld. I tried a similar arrangement with a Circular Hollow Section and it worked perfectly. I have tried fillet and groove for the SHS but it will not accept it.
View 3 Replies View RelatedI have noticed quite a performance hit when coding the same thing in .NEt compared to VBA. I suspect this to be due to out of process calls between .net and Inventor.
Is there any way to bundle many calls and send them as one.
Example: I want to change the parameter value of a constraint and then update the assemblydocument. Can this be bundled into one call to Inventor?
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
please see attached....how do i pattern holes all round the ball feature?
INV2012
Here I am attaching a square to round transition duct drawings which is weld assembly & assembly drawing in pdf, This one was made in Inventor from one of our principle maker, I am trying to make this similar in inventor as I couldn’t, I am pretty good in sheet metal able to make the casing well, but couldn’t the assembly of pins and making of cladding sheets on that curved surface.
Autodesk Inventor 2010.
Windows XP.
Is it possible to add text and lines into round parts? Those are for the manufacturer so they can see where exactly all the stuff will be painted on.
View 5 Replies View RelatedIs there any way to place a full round or bullnose feature on the end of a cylinder without having to use any formulas or pay attention to dimensions similar to the three face selection of the full round fillet option?
Obviously you can take the diameter/2, but the three face selection of the full round fillet is quite simple, and if you didn't originally plan on having the full round it takes extra digging to come up with the right parameter to use.
Is it possible make end treatments to round tube that it will fit round tube, end of the tube isn't straight like in the picture?
View 9 Replies View RelatedWhy does the Round() function require that the number of decimal places be either a number or an object if you want to use a variable? It seems that a Single should work here, but iLogic won't accept it.
See sample code below which is rounding off dimension values. If I dim the variable "somenumber" as Single or Double, I get this error message from the Round() function: "Overload resolution failed because no accessible 'Round' can be called without a narrowing conversion."
When I dim "somenumber" as an object it works, but this seems unnecessary when all it is storing is a single digit number. Why wouldn't Single or Double work for this variable?
Here's the code snippet:
'Dim Current Sketch & Count Constraints
Dim oSketch As Sketch = ThisApplication.ActiveEditObject
Dim oDimCount As Single = oSketch.DimensionConstraints.Count
[Code]....
I have a problem with Inventor pro 2013 rounding of the area moment of inertia to zero (region properties). For example if I create a new sketch and draw a 1 mm x 0.5 mm rectangle and measure the area moment of inertia it will be 0 for one of the pricipal axes. If I change the rectangle to 1 mm x 0.6 mm it doesn't round it off. Seems like there's a problem with the precision in the calculations somehow.
I have tried to change the document units to microns but the same thing happens.
is there a way to make inventor do this calculation correctly?
I could not find Round Perforated Plate style / appearance on Autodesk Inventor 2013. Maybe it called "Perforated Metal 01 style" on previous Autodek Inventor version.
I just found Oblong Perforated Plate as attached.