Illustrator :: Scaling And Proportion Related To Ovals?
Apr 16, 2013
I'm creating a logo that uses two ovals, an innner and outer one. I'd like the outer one to be an exact, larger version of the inner one and look perfectly proportional to the inner one.
However, as you'll see in the attached, the top version (made up of the inner oval and then a 10% expaned version of it around it as the outer logo) doesn't look as proportional as the the bottom version (made-up of the inner oval and then an outer oval I drew myself that I thought looked good.)
Is there a way to create an exact, larger version of the inner oval (to use as the outer oval) that will look and be exactly proportional to the inner oval? Or is the way I'm doing it (drawing it to look as close as possible a fine way to do it)?
View 5 Replies
ADVERTISEMENT
Mar 10, 2012
Senility has set in, and I can no longer remember how to stick ovals around a circle. Need to do this for a client's site, for a gallery (patterns in the little ovals will show large in the middle), but think this is more a graphics question at the moment than a web question. This mock up was done in Illustrator by the client. I know Xara can do this easily, if I could only remember how. Have a feeling i have seen a tut illustrating this, but haven't been able to unearth it. Thinking it might be a blend, but not sure. Can't persuade things to go round the circle, nor work out how to keep them equidistant. I am such a newb.
View 9 Replies
View Related
Sep 16, 2007
I need to make an 11x14 composite page for a school. I am shooting photos of all of the students and they want an 11x14 with the school name and all of the students faces in ovals . I would need about 200 ovals, one for each student.
way to do this? Layers? Masks?
View 8 Replies
View Related
Jan 2, 2014
Having a lot of issues manipulating points on paths in Illustrator CC - this is a fundamental feature of creating vector graphics and it's very annoying I'm paying for this and it's just not working. Eating up a lot of my time simply because I can't select or convert or add the anchor.
View 2 Replies
View Related
Apr 10, 2011
I've created a model which I've decided to unwrap, but for some reason the model's main body is squashed short after flatten mapping, as can be seen in the 2 images attached. Is there any way to get it to flatten to proportion?
View 5 Replies
View Related
Feb 21, 2014
New Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
View 3 Replies
View Related
Apr 16, 2012
In VideoStudio Pro 4, I was able to modify the proportions of my movie : stretched it or squeeze it, in or out of proportion. I can't seem to do this in Video Studio Pro 5. A strategic admittance to promote the next "Hyper Super Ultimate" 6th version 6 ?
View 6 Replies
View Related
May 25, 2008
how to crop an image in CS3 to proportion of a full frame size 35 mm camera?
View 7 Replies
View Related
Aug 9, 2008
I have photographed 19 individuals (full body shots, same lighting, same backdrop, etc.) and I am now trying to merge the individuals onto a background to create a group photo.
I can not grasp how I keep the individuals in proportion to each other. I am familiar with holding the shift key when transforming but how do I know that John is in proportion to Steve is in proportion to Mike etc. in the finished product?
I photographed the background with no one on it to use as the background for the group. I open each individual's photo and lasso their image and use the move tool to bring that image onto the background. But I get nervous and can't seem to get anyone to look in proportion and natural.
Using PS3
View 1 Replies
View Related
Jan 29, 2014
Artwork becoming deformed after scaling or moving it?
I attached a screenshot of a piece of clipart that I scaled down twice with the original showing on top. You can see in the art in the middle position that it's been changed while the original size and smallest size seem to be fine. They are all the same, copy, pasted and rezied.
It's happening very often, and once it does I end up having to re-import or redraw the art.
View 7 Replies
View Related
Jul 16, 2013
how line art changes when scaling object in AI CC? For example I have a logo file to deliver to client that doesn't have the font. In AI CS6 and below you can hold the shift key and resize objects smaller and keep the shape's intergrity. I've noticed in AI CC that resizing fonts converted to paths smaller does not hold the characters shape as well as previous versions of Illustrator. I understood the industry practice of converting fonts to paths as the last thing to do prior to shipping out a design to production. But what happens to logo files that get sent out to clients/vendors, for these files it is paramount to keep the shape intact.
View 16 Replies
View Related
Nov 12, 2012
When I choose the Liquify option from the Filter menu, the Liquify tool opens and I have access to the custom set of Liquify tools. Unlike almost any other tool where you select a brush size, the Liquify tool requires you to modify the position of a slider rather than selecting the brush size dynamically by right-clicking.
The problem is that the brush size selector control goes from 0 to 15,000px diameter. In order to make effective use of a 15,000 pixel liquify push tool, you'd have to have a really large image. Perhaps there is a case where someone at some time used a 15,000 px diameter nudge brush in the Liquify tool, but in my nearly 20 years of using Photoshop, I have never come across the need for a brush that large.
Regardless, because the selector uses a linear scale, it is really difficult to select a small brush size (say less than 100px) without manually incrementing the slider.
I would really like to see Adobe standardize the tool size/preset selector so that it is always available via the context menu (or equivalent) and that an option exists to enable relative slider values or percentage slider values in incremental selectors like brush size. Percentages could be setup where 100% was the largest side of the current image and then brush sizes could be selected via percentage of your image (of course converting to pixels, but the scale would be percentage-based). Even an exponential scale that favored the smaller values would be useful. Or perhaps, movable caps that would allow you to set your own Max and Min values that would rock.
I might be able to select more appropriately scaled brushes in the Liquify tool when I am working with images where a 15,000 pixel brush head is unreasonable.
View 2 Replies
View Related
Jul 8, 2011
I am currently putting together a book of my thesis and need to re-crop many of the images that I've used and taken. The problem is that I would like to crop the images to a set proportion of the golden ratio, golden mean, divine whatever- all the same thing, basically a ratio of 1:1.618 (roughly).
I used to do this with no issue (I think) a few Photoshop versions back (maybe back towards CS2 or something, but as things have drastically changed (now running CS5.5) I am a little stuck. Whenever I select the crop tool, I try and input a fixed width and height of 1.618:1 or vice-versa depending on the image orientation- and leave the resolution blank. A long time ago, I seem to remember cropping the image with the tool and it was a fixed ratio as it is now, only before, the image did not drop from say 11x14 to 1x1.618 and blow up in resolution size. It maintained the image size and resolution and cut the excess off the smaller length generally.
I am NOT looking for that rule of thirds crop but a simple means to crop many images at one ratio. I know there is that script called the golden proportion or something however that does not crop to the right ratio that I am looking for. It mimics the existing photo's ratio which often times is off. The other reason I wanted to go through a certain proportion ratio as I did before is many of my images are of different base sizes and so I don't want to manually calculate this out dozens of times.
Does a simple (non-photo-destructive) solution to crop an image of any size to the 1:1.618 ratio, and maintain the resolution etc? By non photo-destructive I mean to not do the crop as I have been doing, then manually going into the image size and rescaling the image through shrinking the new resolution and then re-scaling the image.
View 3 Replies
View Related
Apr 17, 2013
When I tried to scale an object to more than 200%, I kept getting the message that this would make some objects too large. I tried making my artboard larger but still got the same message. Am I doing something wrong?
View 2 Replies
View Related
Sep 29, 2012
Certainly elements - not all - of my illustrator file (cs5, MacOS) distorts when I down scale it's size.
View 15 Replies
View Related
Mar 2, 2013
I know, I know. This question has been asked a million times already. Unfortunately the Align New Objects to Pixel Grid / Snap to pixel grid tip doesn't work for me. When I scale the image down to tiny proportions, the path becomes horribly, sickeningly distorted. It certainly seems like the pixels are being snapped to some kind of grid, but as you can see in the screenshot, the option is disabled. I tried switching between RGB and CMYK with no luck but I havent messed with the document profile past that. I am not yet ready to spend another few hours recreating the image.
I am using Illstrator CS6. Everything except the "web studio" is a path.
View 3 Replies
View Related
Sep 2, 2013
How could this happen? I tried to scale a logo down to fit a stamp and Illustrator destroys it by distorting the paths.
This is the original logo
And this is what Illustrator does with it when i scale it down. (Image is scaled to same size to better illustrate the distortion)
View 5 Replies
View Related
Dec 12, 2013
Is there a way in Illustrator CS6 to scale text inside a text box so that the text and box scale together proportionately? Not using the scale tool where you have to enter percentages, but using a keystroke. In Quark, you can do this by holding down Command + Shift and dragging the box. This will make the text and box bigger keeping the same dimensions. It's a very quick and easy way of changing the size of your text.
View 4 Replies
View Related
Aug 12, 2012
How can i do referential scaling, like scaling an object with reference to another? see the video. open in new tab or click on it too see the video.
View 12 Replies
View Related
Aug 9, 2012
I am working in 5.5 and have a 3D revolved globe object with a map art applied. It is currently in A2 art board size and I need to increase to A0. When I scale the object I get "The combination of artwork size and resolution exceeds the maximum that can be rasterized." I have tried adjusting the rasterize setting and the map art.
View 5 Replies
View Related
Dec 12, 2012
My shortcut for scaling has turned off and I can no longer scale by clicking on the bounding box and dragging the arrow. Instead I have to go to the transform option inorder to scale . How do I get the shortcut where I can just click on the object back? I am on CS5
View 1 Replies
View Related
Apr 5, 2013
I can't get certain graphics to scale down correctly correctly.
Take a look at the 2 jpegs enclosed - one solid, the other with 1px outline. The graphic men were originally 40mm tall.
In each case the one on the left is the original. The one on the right is the same graphic reduced to 25% then enlarged to 400%. Both should look the same.
How to stop these distortions from happening? I've tried adding and releasing Compound Path, Grouping and Ungrouping, Selecting and deselecting 'Scale Stroke and Effects'. No combination works!
I'm especially confused about 'Scale Stroke and Effects'. Surely when it's selected, the outline should reduce to 0.25 px. It doesn't - it stays at 1px.
View 9 Replies
View Related
Oct 21, 2012
Beginner here, but my scaling arrows have disappeared. How can I reset this?
View 1 Replies
View Related
Mar 21, 2013
I have a file that doesn't have a lot of stuff in it, but the file size seems to be quite large in proportion. Is there a way that I can use DBList, and export the data to a spreadsheet? It would be a lot easier to search through than the F2 way.
View 4 Replies
View Related
Nov 19, 2005
How do you scale a layer proportional to the image size?
I want to scale a layer so that it's 10% of the width of the full image. It's going to be part of an action, so I can't just do the math, and do it manually.
View 7 Replies
View Related
Sep 1, 2012
I have an image that is quite small, cropped from a larger image. I want to enlarge it to 317 mm wide keeping it in proportion.
Using the scaling tool I changed to mm and increased width to 317mm this leaves me with a 'window' into the top corner of the image.
I then used 'fit canvas to layers' and the canvas increases in size ok but it is empty (little grey squares) except for the top corner showing the small window into the image!
If I click on it with the resize tool I can see the whole image enlarged but as soon as i click on the 'scale' button it vanishes again and leaves the small window again?
View 4 Replies
View Related
Jan 27, 2013
I've designed a greetings card that is 1022.23x1021px
I need to scale this because i want to make it a coming soon page for a future website
In which dimensions I need to scale the whole work (drawing/text) up/down to be seen on 4/3 and 16/9 monitors?
there are smartphone and tablets standard dimensions too I guess, do i need to create multiple artboards ?
As I explored Dreamweaver CS6 I noticed the dimensions are shown in the "design" view at the bottom for these devices, may be I could use them?
View 4 Replies
View Related
Jul 1, 2010
When I hold down shift to scale an object or image to keep the proportions constrained, it does not work. This has only recently started to happen and it also happens on photoshop.
I don't have entourage running, which I read could be a culprit.
Would I need to reinstall my CS2?
I am using a Mac Powerbook G4, OSX 10.4.11 Adobe CS2
View 6 Replies
View Related
May 23, 2012
Scaling - for some reason the image get distorted after scaling. see example:
Each time I scale it'll do it differently. this time it made the right side thicker.
Alignment - the bounding box has offset and when aligning it doesn't align the objects right:
View 3 Replies
View Related
Jul 4, 2013
I have a simple vector image:
And after scaling down (about 10 times) it gets noticeable distortions:
Is it correct behaviour? How can I avoid it?
I tried with "snap to grid" and without it, nothing changes. I'm using Illustrator CC.
View 5 Replies
View Related
Oct 30, 2012
I am using AI to import anatomical tracing data (paths and symbols). The data coordinates are in millimeters. I create an artboard as follows:
The file import code reads the data and then passes the bounds data to the art routine, CreateDataArt, as minv and maxv. As can be seen (abRect) the bounds of the data are 13 mm wide by 14 mm top to bottom. Two paths are then drawn into the artboard as shown here:
Note that the rulers are in millimeter units and that the art board is nowhere the correct size.
View 1 Replies
View Related
