Xara :: How To Clean Part Of Photo To Make Base Look Painted
Sep 9, 2011I need to clean a dirty part of a photo in order to make the whole base look as if i painted it, is that possible with xara xtreme ?
Photo is attached.
I need to clean a dirty part of a photo in order to make the whole base look as if i painted it, is that possible with xara xtreme ?
Photo is attached.
I am attempting to clean up/repair a damaged wedding photo to be displayed at a funeral. The photo (about 70 years old) has been crumpled or folded over the years. I have scanned it into the computer and have tried to use the clone tool to remove the fold lines. At a magnification of 200 or less, the clone tools works fine. However, I need to work at about 2000 magnification to remove lines from the bride's face and hair and veil. I cannot seem to get the tool to function at all at this mag. It will give me the dotted line and then change to the arrows but you cannot move ANYTHING.
View 2 Replies View Relatedhow in the world can i erase part of a photo? new to designer pro 7. just have not been able to work this out. finally got the program to launch.
View 6 Replies View RelatedIs there a tutorial for cutting out part of a photo and using it in another photo. I have seen one on youtube but it is not detailed enough. It dosen't fully explain how to add your cut out part of a photo to a new photo. That is, how do i put the cut out part of a photo on top of a new background?
View 1 Replies View RelatedRecently, I upgraded to xara photo and designer 7, i cut off a part of a photo and pasted it on a white document, is there a way to blur a partial part of a photo, in other words by selecting multiple points under the shape tool and blur them ?
View 5 Replies View RelatedWhen I draw a circle (or ellipse, or...) with no fill, and apply 3D to it, I would like the center part to be transparent. As it turns out, I get a white fill with the 3D lights applied to it. How I could make the center transparent ?
View 7 Replies View RelatedHow to make a painted line look like a splash of liquid and I need some pink sparkling liquid spilling into this infinity tube.I have some inner and outer glow...after that...I'm at a loss.
View 2 Replies View RelatedIm working on a class project and what I wanna do is make two paintings and put one painting in the middle of a picture frame while taking the second painting and making it look like it was painted directly onto a picture frame. I took a photo so you all can better see what i am trying to do in the photo you see a painting of the joker i wanna make that painting look like it was directly hand painted onto the white picture frame. How I can make this happen?
View 1 Replies View RelatedIs it possible to make a personal photo into a watermark or just use as a photo to put at the background of the template, I mean the page that surrounds the template page, the one in the furtherest background, I know I can change the colour but can I add a photo to that background?
I am using Web Designer 6.
I have a photo. I used the Perspective tool and it is amazing. I do not know how, and cannot figure out how to make the black part of the photo go away though. What to do?
View 7 Replies View RelatedIs there a simple way to make a cone shape in Xara Photo and Graphics designer 2013? I need to make a cone that can be extruded and shaped sort of like this?
View 9 Replies View Relatedway to further clean up or enhance the attached image. It is my Grandparents wedding photo which my Father asked if I could clean up.
I have mainly used the magic erase tool to remove spots. I have tried some live effects but lose some definition especially in the faces.
How do I copy one part of a photo and paste in another part of the same photo. element 12
View 2 Replies View Relatedhow I can clean up the corners of this photo?It is a B&W photo that I have scanned at 600 dpi and have in PS6.
View 9 Replies View RelatedA family member scanned an old photo of my great grandparents and sent it to me. I would like to work on it in PS, but I'm not sure which tools would be the best to use for this.
Someone seems to have wiped off some dirt in the middle, but it's not well done at all. The first thing I would do, is to set the Levels, and perhaps have a go with the Clone Tool, but if any of you can suggest other tools, I'll try to clean it up. I will also see if I can get a photo with the whole frame on.
I'm relatively new to gimp and I need to know, how do I make a clean circle? I know how to make a circle, but I would like to make it so that it is not pixely on the outside. Is that at all possible?
View 1 Replies View RelatedIs there and easy way to change the base component of a derived part?
The way I use to do it, is to rename the base component. Then open the derived part, and point to the new base component after the "error message".
In the idw environment there is a "Replace Model Reference"" which does it for 2D drawings.
btw. I use Inventor 2013.
“Associative body copy API Sample” 2013 API help.
The above code in the API help shows how to do an associative or a non-associative copy in an assembly of one part into another part. ..BUT the non-associative copy does not always work correctly....
I have been testing this sample code and notice the following limitations with the lower part entitled “Create a non-associative solid base feature in the second part”...
The code uses the proxy body for the source object but it does not use the proxybody for the target object and therefore the relative positioning is wrong for the nonparametricbasefeature when it is created in the target object if the real target body is in a different place than the targetbodyproxy (e.g. it has been rotated/moved in assembly space).
I notice that if you perform this manually using the “copy object” button the relative positioning is maintained correctly even if both target and source objects have been rotated/moved in the assembly...
Why can i use lines from a 3d sketch to constraint a part to a skeleton base part?
I have attached a example where i try to constraint the tube.ipt using 3D geometry lines of the part Layout_3d_sketch.ipt in the assembly teste.iam, but i'm unable to select any lines from that file.
Why can't i use this 3D sketch lines in a skeleton base part?
I hope some of you experts out there in the Photoshop world can assist me in some questions I have about older versions of Photoshop vs new, how to use with a Wacom Cintiq 12wx,
and possibly if I can get a student CS5 extended newer version for my son Tony's use if the ver 5.5 I have won't meet his needs?
My Vista system has developed a few bugs which are not cured by Norton 360.Dragging a window causes it to maximize in a few programs PASTE does not work in some programs -- including X4..The CROP tool stopped working in X4 but is OK in X5 High-lighting is erratic in WORD etc.
I can only run a "clean" install from my OEM disk which means reloading all applications. I was wondering if I should give up and install Windows 7.
What has been your experience with Windows 7/ Did you do a "clean" install or just the update.
I'm relatively new to Autocad so still learning the ropes.
I've been given a set of drawings from a client to design a system on. What I want to do is turn the drawing they have given me into one layer so that I can turn it on and off to just see my system. Is this possible? If so how?
The drawing has about 300 layers currently and a lot of blocks as well.
I'm using Autocad 2012,
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedI have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
Putting aside the fact that you really can't see stars at sunset, and that if Polaris ever shows up near a setting sun, it's the End Of The World -- it's equally easy to add the stars to a nighttime photo..Next. Am trying to build a collection of photo-editing tips on the Xara-Users forum -- [removed link -link broken and or requires membership to view]
Xara's a LOT easier to use than Photoshop. But it is different. I know Xara's really for vector artwork, but when you end up using it more and more for photo editing, it's useful to have a bunch of techniques in one place.
What is the best method to make a base mesh in maya for a creature and get it into mudbox?
View 2 Replies View RelatedLeft: 'vertical align bottomed text with the box of black stroke
Right: manually moved text with smart guide to align with its base line.(what I want to achieve)
As you can see in the left one, text has its base line under itself, and its bounding box doesn't match its base line. when I use align, it doesn't align using its base line but its bounding box.How can I make text align using their base line easily?
how I would combine the curved line with the base line of the green rectangle so that it actually replaces the bottom line?
View 4 Replies View RelatedIm trying to cut a photo of a tree and place it over a photo of a house so the house can be seen through every twig and leaf, at the moment I can only move the tree with the existing back ground. I have PHOTO & GRAPHIC DESIGNER 7.
View 4 Replies View Related