I designed an advert. The newspaper requested the advert be sent in as a pdf at 300dpi.
I met the requirements and e-mailed the advert to the newspaper.
However, after being printed, the text was very hazy, fuzzy and unreadable, although the picture was clear.What caused the unclear text?
turn a image into some thing that looks like the iPod TV advert featuring Eminem.
View 2 Replies View RelatedHow to make the pdf's clearer better quality?
When i try plotting to dwg to pdf using dwg to pdf.pc3 plotter, the pdf's is bad quality, text is unclear in some areas and lines is "out of focus".
I have tried recreating the pc3 file with no luck.
I'm making a brochure on A4 but I want to print it om A3 paper that is folded to A4. What is the best approach to do this. The A4 pages are good for copying the text from MS word into the xar file. But after that I have to print it on A3 in the right printing order.
View 6 Replies View Relatedhow do you print out A4 doc at from 96 dpi to 300 dpi without it increasing in size cant seem to find how to make dpi bigger but doc original size?
View 5 Replies View RelatedLong-term user of CorelDraw, and have just found Xara P&GD, which is quite a revelation. I've re-designed my business card and how to print to A4, pre-perforated card. CorelDraw can make use of Avery templates for printing the single business card design, multiple times, on the same sheet of card, but I can't find a way to do this with Xara without physically copying the design to make a composite A4 layout. Can Xara do this the "template" way?
View 9 Replies View RelatedIs it possible and how to print photos without raster with Xara Designer Pro 7?
I am desperate because I need a printout with no raster but I can get it.
I am completely unable to get a couple of the photos to resize to where they will print in an 8x10 (960x768) format. No matter what I do, they're either cut off or they're distorted. I know the problem is that the original jpg file from my camera is not exactly the right proportions but isn't there some way to correct that using DPX?
In the three above, the people on the ends are cut off when I order the prints, despite my edits and resize efforts.In this one, the print comes out distorted because the sides are squashed in when it is printed at the store.
Reading the Help document it says that transparency in a document is rendered as a bitmap when printing because PostScript can't handle it. This is also the case when exporting to certain file formats.
Isn't there a better solution to this? There are some truly magnificent tools in Xara and I'm sure this means that the technology is there to render documents in a suitable form when printing and exporting.
I've just tried to get a simple logo using some flat transparency from Xara into a Microsoft product and the transparent parts have given me big headaches as I want a true vector solution. The only way I found to work was going via Adobe Illustrator. If Illustrator can do it then why can't Xara? Isn't there some way that Xara can analyse the parts with transparency and create new vector objects where possible?
How does everyone else handle this - do you all simply ignore the transparency tool and work without it?
I am trying to export some artwork as a PDF so I can get it printed, but every time I try to export it I get the attached message. I have tried various times always after a reboot but with no luck.
The file is only just under 7mb in size so I can't figure out why it is doing it.
It is important that I export with layers as I have a cutter guide included so the printer can see where he needs to position the print on the sheet and it is printed on both sides.
I am using XDP6
I am feeling a bit dumb at the moment. How does one print something larger than the "physical" page size--ie., tiled pages--in Designer Pro 6?
I have a drawing that is 3 times the length of US letter size (actual size of the drawing is 7.5" x 30"). US letter size is 8.5" x 11". The page is defined as landscape, so 11" width, 8.5" height.
I regularly do this using another program and will have constant need to do so in the future.
I like to make and print custom cards for family and friends. I use a heavy matte finish paper to print on. But the printing is never as vibrant as my screen image, and this includes photos.
Today I tried this and it worked fine. I converted the image to be printed to a 300dpi bitmap, then using the Photo Tool > Enhance menu, I increased the Saturation to the point where the image looked psychedelic. When I printed on the dull finish card stock, the colors looked just right.
I have a client who asked me to create artwork for a banner she is printing for a trade show. The banner is 19.5 FEET long and almost 8 feet high. I have designed the banner as 6.5x2.6ft with the intent of then dividing it into 9 equal parts which I would blow up to 6.5x2.6 and send off to the printer. So far so good. The problem is that the segments are still so large that when I try to export them as PDFs, I am running out of memory. I tried doing them as jpegs, but when I change the resolution for export to 300dpi, nothing changes- the number of pixels x umber of pixels doesn't increase. My client needs this artwork off to her printer asap and I am at a complete loss.
View 4 Replies View RelatedI used to use Xara Xtreme 4 and loved it. Since changing my computer to one with Windows 7 I have not been able to use Xara Xtreme.
Needed to print out an old Xara image today so downloaded and installed Xara Web Designer 7 as this seems to be the nearest I can get to the old Xara Xtreme that runs on my laptop.
However, I can't find any "Print" option. It's not under File, Ctrl P doesn't do anything, nothing under right clicking. I need to print something quickly and I've given up trying to find the Print option. where have they 'hidden' Print?
Also, am I correct in thinking Web Designer 7 is the nearest program with features to Xara Xtreme or are the features of Xara Xtreme loss forever to this new web site design program?
This post is regarding using Designer Pro to edit print ready PDF's (with crop marks, colour bars etc) created using Photoshop and Illustrator. I can do the edits, but if I try and export the file it corrupts (colour values change, some text changes col)
The files are supplied to me by a designer and sometimes I need to do urgent changes myself before going to print. I have unticked the 'add printers marks' box to avoid a double set of marks and colour bars and have the fonts installed too.
i have been trying for the past hour to export these two files as pdfs for large format print. everything exports fine except the gold trophy design, how to export these for use for large format solvent printing, i normally dont have a problem but this golden shield vector appears to be the problem.
View 5 Replies View RelatedI can not find a way to print out a poster 1000 mm x 1500 mm.There is no such function in Xara X9.
how to print out a poster on a color laser printer A4 size?
What I mean is to use a Tiles or something that professional programs have.
Size of page differs in page size dialogue box to that listed in print options box. I changed computers and it works correctly in the second one in that the page size is the same in both boxes, but I still cannot get it to work in the original pc. Both the file and the printer are common. Reinstalling Xara does not work. It looks like it is not installing correctly, even though it appears to be.
View 1 Replies View RelatedThe "Apply" button is missing on my print options menu (XDPX9). I cannot apply any of the functions such as Imagingsetting - crop marks, output settings, layout settings, separations settings.
View 3 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedWhen printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
I am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedI have a drawing where some lines have a 60% screening in there Plot Style. The print great from AutoCAD. But when I create a PDF and then print the PDF the Screened lines show up kind of blue / purple.
I am plotting to a Cannon iPF720 on 22x34 paper from Acrobat Reader X. I'm creating the PDF from AutoCAD 2012.
I get "Fatal Error: Unhandled c000000dh Exception at 24079af3h" every time when I print to pdf with Acrobat 9 in AutoCAD 2012. However, the Acrobat converter is working properly in other applications. It only happens in ACad 2012.
View 1 Replies View RelatedI have two layers. One is set to red color, the other to blue color (using ctb). I have both layers defaulted to 1 mm line weight thickness. Blue is continuous and Red is dashed.
When printing the blue layer prints at the correct weight of 1mm, while the dashed red layer prints at a much smaller thickness. All line properties are set to default or bylayer (this is not being caused by the lines having individual special properties).
I work in AutoCAD 2010.
(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)
I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.
Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.
If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.
When I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.
View 1 Replies View Related